Hi all,
Friend of mine has asked me to fit a light fitting and wanted it dimmable.
It doesn't say on the box or fitting if it is dimmable or not. The lamps are 12v G4 type.
Surely it would say if it was dimmable??
I ran a completely brand new line from the electrical panel to a single pole switch which controls 4 GU10 LED Dimmable lights connected in parallel, every time i flip the light switch i blow the breaker, i tested the lines for resistance and was still able to check physically if the wire is...
Does anyone have recommendations? I've tried the Screwfix LAP 5w ones, they are ok but don't dim right down. Is this the same with others such as Sylvania? cheers
Looking at changing the lighting in my kitchen to downlighters and narrowed it down to either Halers H2 pro or JCC FGLED6, what is people's opinions on either?
its a large kitchen/dinner and will be warm white. Don't need to be dimmable.
Hi anyone know if there's a square stair light that goes in a 35mm single metal box . I know aurora do one but it's not dimmable . I need a dimmable version if possible . Thanks
I'm out of my depth on this one and need help!
I have been asked by a customer to source and install some LED downlights (50W equivalent) that he wants to dim in increments of 0.5%. He's talking about somethin called DMX that he's seen at a home building show. A trip to my wholesalers was...
Sparkybob1980
Thread
attach
control
controller
dimmable
dmx
downlighters
led
Hi guys new to the forum, have a question, just been out to a job to quote it, customer has 8inch box across the room between chimney breast above the bed with LED down lighters in, nice JCC Non dimmable ones, customer wants a single down lighter to be replaced to a dimmable one, no problems so...
I have a Robus 70W dimmable transformer for MR16 12V bulbs.
The transformer has 3 sockets, for three bulbs.
Can I connect three Non-Dimmable 4W led bulbs to the transformer?
Thanks in advance :).
Hi
I need a module to fit behind a MK logic faceplate, that dims Megaman 6w LED spots.
I've
4 x 6w LEDs
5 x 6w LEDs
Whatever the electrician fitted stopped working after a few days. The standard MK dimmer module worked much better, though it did buzz.
Be grateful for some...
rossyl
Thread
attach
dimmable
dimmer
led
leds
module
recommendations
varilight
Fitted 11 down lighters today for a customer who had bought 11 5w led lamps ( gu10 ) it states on the box at they are Dimmable but when I try and dim them they flicker like crazy , I've took one home tonight , rigged it up to a dimmer and it's fine , any ideas ?
Thanks
Can anybody advise on the following.
Have 4 5w led gu10 bulbs with a v pro series dimmer rated for low wattage lamps. The bulbs are dimmable but when the dimmer is switched on as soon as it is turned down the bulbs flicker badly.
Any advice appreciated.
rattlehead85
Thread
bulbs
dimmable
dimmer
dimmers
downlighters
lamps
led
Hi, anyone had any problems with aurora i 10 led non dimmable downlights ? Fitted 3 on a job 4 weeks ago and have now had 5 pack-up within the last 3 weeks. Fitted loads of the i10 dimmable ones and had no problems, supplier swaps them no problem but becoming a problem for customer and me :(
Jay
Hello all..
Just brushing up on my knowledge of LED's and getting to grips with Lumens/lux, SMD, angle etc etc etc....
What is your experience of LED MR16's? In particular I wanted to know if it was worth fitting them? One of the main reasons for buying an LED is the length of time it is going...
We installed 30 x 12v down lighters in a kitchen a while back and the guy just asked me today would i put in LEDs , I know you can get 12v LEDs m16 but have never used them or checkled them out or I could remove transformers....
anyone any experiences with 12v LEDs
Hi all,
I read that dichoric MR16 are being phased out due to heat reflection and are not advised to be used in recessed lighting.
I replaced some LV mr16 for dimmable cob gu10, and replaced the dimmers to suit. worked fine for a short time, then it stopped dimming, then stopped working...
Getting an extension built with vaulted ceiling. It will have 1 light in the centre. I asked the builder to put in a dimmer switch and a 100W bulb, but he said that 100W bulbs are hard to get now and they are slowly being outlawed by the EU.
A quick Google shows that there are some dimmable...
Hi all. As above really. Called out to a job today where the philips lamps had been nicked from the holders. Trouble now is securing the new lamps in as whoever took the lamps also took the retaining clips! Have looked online and ebay etc but havnt found any to buy as yet. The lamps are the...
Hi, does anyone know a reliable LED T8 Tube for replacing 1800 T8 fluorescents? I found these- are they any good? not done them before so thought i'd ask someone on here how to go about installing the tubes? I need to install a decent dimmer switch was thinking MK logic plus.
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc