Upon testing an installation after a fuse board change there are 2 x circuits which ate untraceable. I have left them connected but was just wondering if these circuits would be noted down in the departures from bs7671 box on the install cert??
I'm changing a CU (with other work) and one of the rings feeds the shed at the bottom of the garden. It's 2.5 T&E which runs from the CU into the ceiling, down the kitchen wall, then into the floor slab using corrogated plastic conduit. From there it runs underground for about 30 metres too the...
Hi, I am new so I need to get some posts going. I am not a registered spark I am more of a technical contracts engineer. I am looking at if it possible to have a generator which backs up the mains supply (auto change over) but also is connected in parallel so can export to the grid. I am not...
I am carrying out the continuity for a ring final test for a single phase TN-S system. When doing the end to end Neutral I don't get a reading!! What is wrong here and what Code does apply (Code 1-3)?
Many Thanks.
nazoom
Thread
circuit
disconnected
electricians' talk
final
neutral
question
reading
regarding
ring
ring final
hi there
carried out IR test on radial lighting circuit today. L-N 700MOhms N-E 650Mohms L-E 320Mohms just wondered why the L-E would be nearly half the value ???? ( test carried out at 500v dc, TNCS system circuit disconnected at board)
Hi there
New member here with a very basic question (I am no electrician!). :saddam:
I have a 19.2 V / 9000mAh battery (for an electrically assisted bicycle) and the wiring on the charge end needs a little attention. Basically one end of the battery gets plumbed into the bike and supplies it...
Was doing a cu change yesterday and as usual the old board had no circuit identification at all. After an hour or so of moving lots of junk about I managed to get 7 of the 8 circuits but there's one 2.5 t+e cable off a 16a mcb that I just can't figure out what it does, if it does anything at...
hi all just wanted to know if anyone knows a quick method of silencing a bell box even when the main panel is disconnected and the main battery is disconnected just thought i would ask cause my neighbours are not happy ps im not able to reach the bellbox(no ladders) DOH!!!
bobby101
Thread
alarm
cause
disconnected
electricians' talk
house
trouble
OK this one has be beat!
Replaced 2 DB's (one night storage and one 24 hour) with a dual board but adapting it so I have 2 different supplies coming in. Earth is common in the boards, but then it's common throughout. Neutral is definitely split. All connected up, tested the RCD and it did not...
keefy
Thread
aus
disconnected
electricians' talk
fault
neutrals
rcd
switching
tested
tripping
Hi all just a quick question carried out all of the above tests yesterday and got the following results
Ze . Tncs system 0.18 which is fine
Pefc . 1.1ka
Psc . 1.6
Carried out the same tests today and got these results
Ze 0.28 again fine
Pefc. 845 amps
Psc 1.1ka
Can anyone tell me...
schoe
Thread
disconnected
electricians' talk
system
testing
voltage
I've bought a repossessed house where the electric (prepay) meter appears to have disconnected. Picture of inside of meter box below:
I've topped up the meter so there is credit on it (the meter seems to be fully functioning) and I flicked the trip switches in the house to on but I still...
Hurders
Thread
aus
cable
disconnected
electric
electrical
electricians' talk
meter
Hi folks, client has requested PIR on a property with disconnected supply (not sure how disconnection has been effected). Property has been empty for a long time and potential buyer (retired electrician - no pressure) wants to know as much as possible to see if price can be negotiated down...
SW1970
Thread
disconnected
disconnection
earth
electricians' talk
pir
property
supply
testing
tests
Now this is a bit of a head sratcher. I've been called to a property where the RCD (used as main incomer) trips at exactly the same time every evening (7.50pm). Some work has been carried out recently at the property by another electrician. He installed new wiring via a 2 way stand alone C.U...
Hi all, have got a rewire on an empty property, the supply has been disconnected by the DNO, due to the basement of the place having been used to grow weed. the client want power, so we can start the refurb, he's been intouch with the supplier, but they want a cert doing, what are the options...
been asked to look at a light in office unit that was diconnected buy another electricain 2 years ago, the lighting circuit is switch fed with the switch lines running though metal trunking (ceiling mounted) and in singles, the light is a end of line and had been disconnected at the light...
coxy84
Thread
aus
disconnected
earth
electricians' talk
fault
fitting
light
neutral
I have just tested a ring and the IR reading between N & E was 0.00 M Ω, N & L was 0.13 M Ω and L & E was 0.14 M Ω. I have removed all the loads and tested with a Fluke at 250 Volts. Plz could someone point me in the right direction to locate the fault.
Further more the Ze was 0.08 and...
A friend of a friend split up with her partner and he took the shower with him when he moved out leaving wires hanging out the wall. The local council were called and the circuit was disconnected from the consumer unit as a safety precaution. A plumber has put in a new shower and she has asked...
mrmatt
Thread
aus
circuit
disconnected
electricians' talk
location
notifiable
notify
shower
Hi,How does everyone fill out the certs for a split load board to include the RCDS if issuing a DOMESTIC ELECTRICAL CERTIFICATE?
How do you include the details of the split loads and the submain RCD characteristics into the boxes provided?
Do you test RCD tripping times for each circuit even if...
Hi
When measuring Zs on circuits do you guys leave the main bonding connected or disconnect it? Most of my testing books including GN3 say leave it connected, but another book by Anthony Hinsley says to disconnect it as it will introduce parallel paths (which I get) and that if left connected...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc