Going to fit an 'boiling' tap for a plumber next week so asked for a pic of the CU and got this:
which is all rather odd. Doesn't affect what I want to do, but the first time I've been B3 MCBs being used and can't think of any reason why someone would choose them over the standard B6
The...
I've had an EICR done on a property via a letting company I use, (they didn't inform us this was taking place), next thing an invoice comes through the door for £180 for a full EICR, and an estimate on the back for £708, for replacement of consumer unit and fault finding for inadequate earthing...
I am looking for options to monitor a home installation for a day or two to find out what is causing suspiciously high bills. Ideally I would want maybe 4 channels recorded for at least 24 hours and to separate the total demand from at least one circuit (e.g. sockets) to help narrow down the...
I have a job which is needing a new CU. What would the general view about a new Crabtree loadstar SPN 125A board being used as a domestic consumer unit. I know it will work, I was just wondering about the inspection and how some may argue it some how not right.
Thanks
Hello,
I am looking to change my career and become a domestic electrical engineer / installer. I do have some related experiences and qualifications .
I am looking for some un biased advise on what steps I need to take in order to achieve this . Long term I am only looking to work in the...
I'm just in the process of starting a rewire in a 1930's house, and the new owner has asked if the old servant/butler call system could be put back into service. It's not functioning at present, but I've not looked into any detail as to why. Anyone familiar with how they are supposed to work?
Good afternoon one and all. I, like many non-electricians are having issues regarding the need to have domestic water pipes (plastic entry to the property) bonded prior to an EV charger being installed. I have read a number of articles on this forum which quickly leave me behind with the...
Hi
I am going to do some Appliance testing for a Charity shop, could anyone comment on it please, been out of the game for awhile ow, just had my PAT tester callibrated .
no I don't have the 5th edition, will prob get it, but just for domestic items you would find in a charity shop I not sure I...
I'd like to track the power usage on my 4kw electric immersion over time. Can anyone recommend a relatively inexpensive 20A min meter which I can fit in line?
Hey guys - I am in the process of buying a flat, and just got the electrical installation report. Seeking for feedback on the following:
- THE FIXED WIRING IS IN FAIR CONDITION FOR ITS AGE. THE PROPERTY DOES NOT FULLY COMPLY WITH BS:7671 AS
AMENDED DUE TO THE CODES LISTED ON PAGE 2. THE PROPERTY...
Need some advice. I have a 12meter 24Vdc cable run…. Current 3Amps.
I require a 1.5mm cable 6 core for supplying led strip lights outside due to volt drop.
The cable will be passing through stud work with rock wool insulation fitted.
What 6 or 7core can I use in this install, are there...
As the title says. I'm really battling with figuring out the best route to electrical training (College level 2/3 v's DI), and to be honest - even though I'm really keen, I'm starting to get a bit disillusioned with the whole thing.
I'm in a technical job currently and 41 so apprenticeship is...
Hi Everyone,
I have recently completed my Part P, 18th Edition & Initial Verification course.
I am looking for weekend work in an around Uxbridge (10-15 miles radius) for practical experience. I am generally good with most aspects of electrical installations and would be good as an electricians...
RMS Facilities Management is looking for domestic electricians for the new build housing sector. Send your CVs to [email protected]
Job title: Electrician
Reporting to: Head of Facilities Management
Retail Merchandising Services has expanded the services it offers to our valued partners by...
Hi
As an Industrial electrician for 20+ years
I was wondering what I need to do domestic installations and sign off work. I read some things on part p, but that left me confused as they come and Inspect your work, but I can't start notifiable work without being part p?
Thanks
Neal
Morning all,
I'm currently rewiring a flat I've just bought which had the CU and old meter in a surface mounted enclosure that the previous owner built.
the problem is it's in quite a narrow hallway and it sticks out quite a way.
I have changed to consumer unit to a recessed one. The issue is...
Fellow sparkies, General Q
I’m 21 with 3 years experience just coming out my time. I have my level 3 and NVQ ; portfolio)done just need to complete my AM2. I’m a typical commercial sparks doing plenty of work with metal containment, SWA cables that sort of works. But I have been thinking about...
Hi Guys/Girls
For a bit of background i completed my Level 3 in requirements for electrical installation (BS7671) many years ago and was 17th Edition. Regrettably i left the trade to pursue other things and have decided i want to be a domestic electrician again.
I understand that i need 18th...
I HAVE MY LEVEL 3 DIPLOMA IN ELECTRICAL INSTALLATION, 18TH EDITION, WHAT ELSE DO I NEED TO BE ASAN CERTIFIED DOMESTIC ELECTRICIAN ? PART P? AND TESTING AND INSPECTION?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc