Hi all,
Currently replacing all wiring and the CU in an outbuilding with a new Metal Clad fully wired with SWA. There is currently a tumble dryer and fridge freezer plugged into the same double socket which forms part of a 3 socket ring circuit. My plan was to use a spare way on the CU to have...
TUMBLE DRYER sorry about the title
seems they are causing fires with a fluff build up on the heating element and a lot have been affected Creda, Indesit and Hotpoint
see link below
'Significant number' of Hotpoint, Indesit and Creda tumble dryers 'pose a fire risk' - ITV News
Hello,
Just had new consumer fitted during recent kitchen revamp. Had a couple of external sockets fitted as well.
One fixed to the rear exterior wall, while the other one is fitted inside the garage.
The Consumer Unit is Wylex (NHISS10SL) 10 Way Dual RCD
The Sockets are storm weatherproof...
Morning, has anybody ever come across 1 of these things ???
Local plumber has asked if I can wire 1 up
not seen it, yet, but don't like sound of it. an advice
Cheers
I occasionally come across reasonably sized ( not for some of you , I know ! ) star delta motors that have been run in 2 x 3core swa .
Now after looking in to this in the past , it has been suggested that as they tend to be only on motors up to 30kw or so , and as the loading per phase will be...
here for sale are 2 electric hand dryers eflows they come with installation instructions and fixings etc can deliver for a fee of £10 open to offers these are valued at about 300 pound
but im open to offers heres a link which are identical to these
eFlow Hand Dryer - from PARRS UK
please feel...
Not easy to see in the image but the Live and Neutral are fused together. I ripped the top off to see what happened. It was in a B and B house kitchen.
Hello All Wise and Wonderful Persons!!!! :rofl:
(only joking!)
I am currently working in a house which is being complete refurbished. Whilst walking through the job with the client, he asked if it was possible to have a power supply for a hairdryer within the basin unit in the bathroom, so...
Hello. I got a new clothers dryer and before I attached the wire to the dryer I stupidly attached the wire to the wall!:banghead: then touched the other end of the wire to my fingers, and pow! I didn't feel any pain luckily. The end of the wire that attaches to the dryer was burnt and I had to...
Done a periodic test and failed a spur unit which was supplying a hair dryer hanging up in wet room in a commercial building the spur was less than 3 metres from the edge of zone 1 so this is why I failed it gave it a code 2 now the client has questioned it as they don't want to move the hair...
Guys i'm doing an EICR at the minute. Do hand dryers for public use require RCD protection? Wired in singles in earthed steel pipe, no bath or shower in the room........
I've had a few recommendations from other contractors from recent EICR's stating that there should be RCD protection to hand dryers and water heaters in toilet areas of commercial buildings. There are no showers in these areas, the wiring is mostly surface (plastic conduit) and its not domestic...
I have been given a spec for a pretty high end bathroom and the thing that jumped out at me was a hairdryer is to be hard wired into a drawer underneath the sink. Id always though that it was only fixed equipment such as heaters that could be hardwired but having had a scrawl through the regs to...
Hi there
Been asked to look at replacing hand dryer is campsite toilets.
Looking online for suitable ones, and found one that says suitable for ZONE U
Where is Zone U
Thanks
Got to connect 4 x electric hand dryers tomorrow in 4 x different toilets. Was going to spur off the nearest socket point for each one, with an rcd spur by each dryer, via trunking/conduit.
Silly question, but do they need to be rcd spurred, if there is no shower???
Believe it or not they come...
I have a 3 month old condensing tumble dryer, which has recently started tripping out the RCD (63A, 30mA) within 30 secs of being on. I've tested the RCD, which was going out at 18mA, and the tumble has an earth leakage of 1.17mA. I have now changed the RCD, but still continues to trip, within...
Don't laugh!!!
Client wants a socket in a small bathroom so they can use a hairdryer. Bathroom is too small so its a no, no.
So the alternative is a class 2 unit using the shaver point for the supply - so as I know absolutely nothing about hair dryers are there products on the market for this...
Hi guys, wondered if anyone could be so kind as to recommend a decent hand dryer suitable for domestic use?
Customer currently has 3 small ones fitted in his property but they are pretty useless, ie insufficient drying time making them pointless. Looking for something reasonably fast without...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc