emergency lighting | Page 3

emergency lighting

Recent contents View information Top users
  1. B

    Emergency lighting question

    might sound a bit stupid but can I break into the permanent live and fit a wago to get an extra feed to fit a new emergency light elsewhere on the circuit?
  2. C

    emergency lighting layout drawings

    Is there any software that will enable a rough drawing of a building layout which can combine photo metric data? Possibly a free software from a lighting manufacturer?
  3. Grangewood

    Emergency Lighting - Periodic or New System

    I have recently passed my Fire Alarm and Emergency Lighting Training and have been approached by a friend with regards to Assessing the Emergency Lighting for a local company. I have conducted a visual check and the system is clearly Non Compliant, there are No Documents in respect of Plans...
  4. M

    Emergency Lighting query

    It's been a while since I tested emergency lights and I just wanted to clarify something. If the lights not working and the green LED light is off, is this an inverter and if the LED light is off and the lights still not working is this a dead battery?
  5. Paul Williamson

    Emergency Lighting Mains Indication Light

    Good morning all, I have a question about emergency lighting and the requirement of an indicator light stating that it is on mains power and charging. The centre that I work at has been refurbed and new LED type emergency lights installed at very high level, I don't know what MCB's control them...
  6. T

    Emergency lighting black and white wires

    Hello, I feel a bit stupid asking this on site now as the spark looking after me has already mentioned it, but why would an emmergency lighting system have a separate 2-core fire performance cable (black and white cores) pulled in with the FP200? I’m sure it’s called a ‘bell’ or ‘belling’ cable...
  7. C

    Emergency Lighting - Understanding

    Kindly refer the attached Image. There are 2 Places at which I can give reference signals for Emergency lighting. 1. At MXC 2. At LTC (Unswitched & Switched) What is the difference between the above two? why there is a need to provide input at two different locations?
  8. B

    Emergency lighting for a beginner

    could someone please post a diagram for a 2-way keyswitch operated emergency lighting circuit. Circuit includes one emergency light and 3 normal lights Thanks in advance
  9. tuckermot

    New maintenance man emergency lighting

    Hi as part of my job I have started doing minor maintenance in our warehouse and office block .I have a light out in the office which is a ceiling light that sits in the suspended ceiling .It operates as a normal light and when power is turned of for that lighting circuit the light also has a...
  10. S

    Design of emergency lighting circuit

    hi all, Can anyone provide a worked example of rating a breaker for a circuit. For example In an industrial environment, we have our own HV supply and each substation on site has its own earth rod. I assume this falls in to a TT system. if I wired (14) 8watt lights in parallel back to a...
  11. S

    Testing emergency lighting

    Hey all I am a 17th edition sparky... but currently not actually doing much electrical work. I work with a CCTV company that basically do as they please when it comes to regs, doing a job properly etc. They have asked me to go test all the emergency lighting in a public building, and I...
  12. G

    Emergency Lighting wiring help!

    Hi all, I was changing an emergency light fitting (maintained) and came accross an unusual wiring configuration. There were 2 supplies, 1x 4 core from emergency light socket and 1x 3 core from general light socket. There were 5 terminals inside the light fitting marked, T, L1, L2, N, E. The...
  13. R

    Annual emergency lighting test in part disused building

    Hi all i was hoping for some advice, I am carrying out an annual emergency lighting test tomorrow in a hotel. Part of the hotel is no longer in use and all supplies have been locked off. Should this part of the building still have emergency lighting in place in case emergency services need access ?
  14. L

    External Emergency lighting

    There is high level emergency lighting where I work. It keeps switching itself on and off whether the sensor is activated or not - its on timer so shouldn't be changeable like this. Anyone have an idea of the problem?
  15. sham

    Emergency Lighting for HMO PROPERTY

    I'm carrying out an inspection report certificate for emergency lighting for an HMO house. I have noticed that there are no emergency lights in the back dining area and kitchen. The electricians who fitted then, did so in 2013 only in the stair wells and front corridor leading to main door. I...
  16. C

    Emergency lighting test switch key

    Hi All The fishtail key for the emergency lighting test switches has gone missing from my workplace. This prompted a discussion about whether it is safe to use any thin metal object to activate the switches. Anyway, is it safe to use pretty much any thin object that will fit in there or is...
  17. P

    Emergency lighting batteries - Power off?

    I have to change a number of batteries in emergency maintained lights, but am slightly concerned if I keep the mains power on I might potentially mess up the electronic modules. Turning the power off will slow me down so I prefer not to. Not something I do too often so advice appreciated?
  18. S

    Emergency lighting BS 5266

    In a standard set up for emergency (non maintained) lighting ,in an HMO for example, is it necessary for the lighting to form a single circuit i.e to be simultaneously isolatable for testing purposes or can each light be fed separately with its own test switch?
  19. S

    Removal of emergency lighting

    Hi there I’m after some advice if possible. I currently have a non-maintained emergency light fitting wired to an emergency fish tail switch in my home. I am looking to remove these and replace with a normal light fitting. Whilst I am quite happy to tackle most things I wanted to get some advice...
  20. Jim90

    BS5266 Emergency lighting

    Afternoon guys, Just a quick question in regards to annual inspection and testing of emergency lighting as per BS5266. A supervisor at work has asked us as engineers to carry out a load of 3hour annual discharge inspections on various sites and a few engineers have refused to do this. This is...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top