I’m after some advice. I have a single socket in a bedroom where I’m putting some panelling. On the panelling I’m wanting 2 double usb sockets (one each side of the bed).
First question: Should I install a 20A unswitched flex outlet plate in place of the single socket to feed the 2 double usb...
I have a 4 socket extension block plugged in, in my bedroom. Just plugged genuine iPhone charger into it and instantly loud bang and the socket + charger burnt out. Although no damage at the wall socket. I assume this is just a problem with the extension and not the wall / main wiring? Just need...
I like to be able to connect an electrical tool such as small vacuum cleaner to clean things on the attic or a light.
For convenience, I like to plug one end of this cord to an outlet on the ground level, then let it run straight up to a small hole on the ceiling to the attic. So, only a few...
I am looking at plugging a medium-sized (85L) freezer into somewhere else and will need an extension for it. It's a fairly new freezer, bought 6 months ago.
Would one like this be safe to leave it plugged into?
https://www.amazon.co.uk/gp/product/B081P5GR6K/
I have an existing lighting radial that ends with 3 x LED downlights which are all 230VAC integral units (cannot remove bulbs).
I'm extending this by another 3 lights so I'm picking up the supply from the 3rd light and daisy chaining them up using a wago light junction box.
So how do I test...
Good Day, everyone, I came across this forum and thought this would be the place to ask my questions...
I am not an electrician but I have a decent knowledge base, my mother was a certified electrician most of my life but has been out of the game for many years now. What I am trying to...
My 4 plug, 2 usb, surge protected extension lead started producing a clicking noise about 2 months after purchase.
The clicks are every ~0.4 seconds and start as soon as the power is supplied to the extension lead, even when nothing else in the room is plugged in to anything.
The clicks sound...
Can anyone tell me if there is a way to put a 422mm T2 pushfit lamp into a socket made for a 458mm lamp? The lamps aren't available so I wondered if there was such a thing as a lamp extension.
Hi all,
I'm not an electrician by any stretch, but I do try to do the odd job in my studio. And shortening extension cables is something i need to do once in a while.
When taking the plug off one recently, I saw these tiny crimps that were used. And I can't for the life of me figure out how to...
Guys so my parents built me my own room in the backyard that is seperate from the main house (we have almost an acre of land) when we moved into our new house this past year but the person who built it micky moused the wiring and just made an extension cable that connects from my room to an...
Can anybody tell me where I can find this product as PVC or if anybody makes a PVC version?
View: https://www.amazon.com/Hubbell-Bell-5407-0-Weatherproof-Extension-32-Inch/dp/B003A44Z3G
Hi all, looking for advice, based in the UK.
I have a 30m long garden with shed at bottom that I want to run an extension lead to on a permanent basis. Use is for power tools (drill, jigsaw) plus lamp in the winter so neither constant nor heavy usage.
Currently I run a single 40m reel...
Evening all,
This has probably been answered somewhere here, but in case it hasn't... I have a Fluke 6500-2 and had trouble testing SPD extension leads as you cannot drop the voltage to 250V using the IEC lead test button. I found a way to set up an auto test sequence to include EB and 250V...
Hello all,
This is my first post, some background first.
I'm not qualified. I am comfortable with logic-level voltage and have worked a summer job wiring control systems under someone with 30 years of experience. I am comfortable I can wire something up neatly and safely (no nicks, no stray...
If i were to use this Surge Protected 8 Plug extension lead with individual switches, could i plug 4 plug extension leads without switches into them? For this setup, the power is only going to small consoles. I want it to be as easy to use as possible, so I wanted to have the 8 Plug Extension...
Hello all,
I am new to PAT testing and have a Fluke 6500-2. I am having an issue whereby I cannot seem to drop the voltage down to 250V when testing a surge protected extension lead. I have read in a couple of places that without a means of lowering it from 500V simply hit the IEC test button...
My partner and I will be working from Germany for a few weeks. We have a couple of laptops, monitors, iMac, printer, TV, etc. that need to be plugged in. Obviously this would mean a ton of adaptors and headache in terms of where plugs are positioned.
I got two of the below extension tower...
I have pasted the question in below, I have no Idea how to do this of someone could give me the pages and a step by step guide would be perfect, it's for my college hotel extension.
5. Determine, for one of the circuits supplying the fridges, the minimum possible cross-sectional area
of the CPC...
got to add in some breakglasses, ceiling detector and sounder to an existing fire 12v fire alarm system in a local village hall as theve put a new room on the side
which cerrtificate would i have to fill out? im a full napit member
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc