ive got to design and install supply to about seven sheds on a farm 3 of them going straight back to meter position on the edge of a field in a brick constructed hut made for purpose for the new supply, the supply is tp&n i do no that the power and lighting accessories have to be ip44 rated but...
Hi all
Went to look at a job today on a farm , 3 phase board with 75mm supply on a 100 amp 100 ma rcd mainswitch, with a submains out to the house , which is also protected by another 100 ma rcd, problem is every time theirs a trip in the house it trips at the main distribution board also which...
Welshsparky
Thread
delay
discrimination
farm
help
installation
supply
Hi All,
I have an invester looking to fund large scale installs up to 10MW. Sites must have planning permission and be within the south west of england if anyone knows of anything please let me no.
Many thanks
tom.stilwell
Thread
farm
going
looking
planning
solar
solar farm
start
Both inverters gonna be fitted in an open barn (fronius ig plus) One is going to a holiday cottage (58m overhead run) and the other to the house (55m overhead run).
I`m thinking 4mm cable for each due to voltage drop.
Cause its a farm and open barn what ya think on the height of the...
I'm doing my first farm building installation and would like to get it right.
The Main Barn has a 3ph 100A TN-C-S supply to a 3ph Meter. I'm ripping out the the rodent eaten ancient switchfuses, domestic consumer units etc and starting again.
My plan is to feed a new local 3ph board. From...
Piratepete
Thread
boards
buildings
farm
first
installation
rcbos
time
Hmmm.
Had a look at a job today, just need a bit of advice on something...
Split load Wylex CU, all original circuits have been moved to the RCD side to make way for the rogue ones on the non-RCD side.
There are problems with very poor IR on the lighting and a scrape-able pass on the ring...
Hi
Had a phone call to go and look at moving a 44kva 3 phase generator on a farm. Im going to have to resupply it in swa. I havent done any work on a farm and i ve only ever installed temporary generators when the electricity board have decided not to turn up a day before a shop opens. I am...
Hi folks, what began as changing some lights for a tenant in an outbuilding has become quite a nice project. The 3 phase origin and main panel is a mess and needs sorting. First concern is that the neutral appears to be fused. It may have had a solid link installed but can't determine. In...
Villagers living near the UK's largest illegal travellers' site are considering staging a protest march if a planned eviction is delayed again.
Residents in Crays Hill, near Basildon, say they may also withhold council tax unless travellers are evicted from illegal plots at Dale Farm soon...
Hi
I'm sure this has been asked before on this forum, but I'll be darned if I can find it. So pointers are appreciated.
Basically, I potentially have a customer who wants a 50kW system on his farmland and a 4kW system on his house. They are the same address but different supplies/meters...
Hi all went to see a customer to quote. He says that he has a little project abroad wants solar farm for running hotel complex of 52 ensuites and amusement rides-any ideas. Said I would look into it where would I look?:innocent:
Hi Everyone.
Has any one ever installed a system on a Asbestos ?farm roof. If so, How did you do it and what are the health and safety rules?
Many Thanks for your help
Tom
New Area for me this...
Basically i have fitted a 3P&N 100A Switch Isolator to a supply from NEDL
next step is approximately 100m run in 35MM 4 core swa buried from Service position to a 3phase DB..
my intention is to then fit a secondary "local" isolation point with intergrated fuse links as...
I know according to approved document M of the Building regs that switches are to be installed at a maximum height of 1600mm, but do the building regs apply on a farm? it's a completely new build shed
also I seem to remember something about part P only being applicable in a domestic dwelling, is...
We're pretty rural and I've had several requests lately for field based solar farms. I understand in theory the following....
Enquire of DNO - Can we site a solar farm here? Contestible and no contestible costs
Farmer will need planning - What does he need to submit with planning app, a...
Ramjam
Thread
design
farm
panels
planning
plant
solar
solar farm
Evenning everybody. I've been asked by a farmer friend to remove a CU inside a trailer and replace it with a waterproof one in an enclosure outside. The CU currently feeds three stable units via three seperate 4mm SWA radials. With regards to RCD protection what does anybody recommend? Ive been...
Went to a farm this week to look at a possible job
had a good look at the earthing arrangement ,
as I always thought that farms were always TT
( and I'm sure I've read a reg in the BRB stating all farms should be TT )
but this one is unlike any I've noticed before
Has a Met with one earth...
Hi hope this makes sense.
Been asked to look at the electrics in a large Barn Complex. Three Metal constructed Barns joined to each other ( Used for Animals, storage etc). I know there is a section in BRB about this, but does not answer my question. Inclined to turn the job down as I do not...
Evening all,
After a long week I've been asked to size a cable for the following:
70kva 100amp, 3 phase supply, 4 core SWA, 160m long run, buried.
Would a 50mm suffice?:confused:
Secondly, for a CPC, i was thinking to run in a 25mm alongside the armoured.
Would you agree with that?
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc