Hi chaps.
What are the permitted zones for concealed wiring feeding Dado trunking?
I am doing a small class room extension and the architect wants the pvc conduits that drop down from the suspended ceiling to feed the Dado concealed in the stud wall. Is this permitted?
Cheers
Lee
Hi all was wondering if anybody could help who has knowledge with sky installation , currently doing a rewire and am pulling in the sky points so the cable is hidden, in total there is going to be 8 tvs and they want sky for each one of them, pulling in twin satalite cable for sky plus but do...
tanna
Thread
advise
cable
feeds
installation
please
seperate
signal
sky
splitter
Today I picked up a 2nd fix job as previous sparky unable to finish and I was a little confused at what I saw.
In the Kitchen there was double switch but with 4 cables coming through the socket. Lucky for me they were labled "feed" "feed to Light" "2Way1" & "2way2" now this is a bit confusing...
This is a 2 way 2 gang dimmer switch, which has feed in/out, and 2 switched lives and neutrals. So 4 neutrals blocked in a connector block, which was then put behind the switch as there was no room inside (only a 25 mm back box used), and the feeds had to blocked as 'the installer' could not get...
Guest 004
Thread
dimmer
electricians' talk
feeds
neutrals
switch
switches
when
Hi Guys
Got a loft conversion going on soon, i would like to fit radio link alarms on ground,1st and loft level..prob is, all 3 floors are on a different lighting circuit,
Is this ok to connect from three different feeds ? or as i suspect , they should all come off the same circuit ?
Any help...
KEVINDOE
Thread
alarm
alarms
circuit
different
electricians' talk
feeds
point
radio
smoke
smoke alarms
Ok im on a contract installing kitchens and I was told by a collegue that its fine to put PVC trunking behind the cooker but I have reservations if this against any regs??thought id quickly ask here 1st.
ldworks
Thread
aus
behind
cooker
electricians' talk
feeds
kitchen
pvc
switches
trunking
Got a bit of a problem working this one out, maybe someone can help - I have to install 3x washers & 3x Dryers (single phase) in the same location. The only board I can take the feed off is in an adjacent building (15 / 20metres away) with enough spare ways on the current 3 phase board.
Problem...
I was in a pub cellar yesterday and like most it's wired like *****, like the rest of the building. But one thing I noticed was three single phase breakers supplying three 63A single phase rcd iso's. It was done in a 4 core SWA so yep u guessed it the forth core was a shared neutral for the...
I've been asked to run cables for a small network while the property is undergoing refurbishment.
Would cat5 cable suffice for both telephones and broadband extensions?
Hi,
I have been asked to replace a fuse box with a new consumer unit.
I visited the flat today and found that it has 2 separate fuse boxes and 2 separate feeds (possibly on different tariffs).
Do I need to fit 2 separate consumer units ?
GreenElec
Thread
aus
consumer
consumer unit
consumer units
electric
electrical
electricians' talk
feeds
flats
units
when testing parallel feeds (say 2x4c70mm) do you have to separately test each cable or test them both connected together as this is the way they will be used
yours benji
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc