figures | Page 2

figures

  1. B

    First Anniversary Generation figures

    Today my 4kw system has reached its 1st anniversarywith a pleasing 3338 KwH generated in last 12 months. System is 16 Hyundai 250Wpanels facing due west and SMA 4000TL. This is some 433w over the SAP, which I suppose is normnowadays. My friends 4Kw system, which is split equally east, &...
  2. S

    Fuel Inflation Figures?

    What are you using for fuel inflation figures?
  3. E

    Another industry making money from solar

    Mis-Sold Solar Panelswww.mis-soldsolarpanels.com/ You +1'd this publicly. Undo Is your investment not performing ? No Win No Fee - Compensation Claims seen this on google ????? what next?
  4. S

    How do they arrive at these figures.

    I've been to price an install today where they had another quote for 2.25KWp "Fully" installed for £11800 (nice if you can get it) there figures showed a return of 20%pa. I'd love to know how they get to these figures because I can't get near MEP's let alone this one and I went in at £5500...
  5. R

    SAP2009 v9.90 where do they get the Solar Irradiance figures from?

    Throughout the document 53.4 N is used on a lot of the solar tables. However, when it comes to solar PV and for that matter solar thermal the table does not state its origins. Does anyone know where this data is based? Most people seem to believe it is Sheffield (which is 53.4 N) and the old...
  6. K

    Not good DECC figures

    Re the below: http://www.decc.gov.uk/en/content/cms/statistics/energy_stats/source/fits/fits.aspx We are offering 4kW Yingli @ £6199 but very quiet. This is with a 15% return. What's happening?
  7. G

    March-April solar PV capacity figures and the July FIT cuts

    I've just spent the evening analising the Solar PV capacity figures for March and April to see what they would mean if DECC stick to their proposals for basing the level of FIT cuts scheduled for the end June / Start of July on these installation figures. Bluntly, it's not looking good, with...
  8. E

    Cut-out fuse shared by 2 properties

    Hi All, Been to look at a job, where customer wants to install 9.5kw shower. 3 Bed 2 storey flat. Calculating the load on board at present with diversity comes out at 68.8A, if the shower was added calculations came to 94.6A. Looking in the meter cupboard, the supply splits to 2 meters after...
  9. G

    real power figures

    Hi I was just watching the installation of 8 PV panels on my neighbor roof, in each panel was written 250W so in total this will make 2 Kw. As the panels will generate only low voltage C.C. power, this in turn has to be stepped up and convert to 230V C.A. for this purpose an inverter has to...
  10. S

    Silly question, but please spell out what the new FIT figures mean?

    Hi Guys, I missed the boat about MCS I've been busy this year until very recently I understand that the FIT's have changed, but what does that mean to a new install? I will be moving soon and as a consumer will it be worth doing having Photocells installed? As a contractor would it still be...
  11. A

    PV SOL users – help! as my knowledge is limited!

    Put Sunny Design in the hands of a novice and this comes out: Based on 4kW systems + SMA 4000TL-20 LG LG250S1C 857 kWh/kWp Suntech STP250S 20/WD 853 kWh/kWp Samsung LPC250SM 851 kWh/kWp Hyundai HiS S250MG 848 kWh/kWp Sanyo...
  12. T

    So many different investment return figures, which you use?

    I know in the end it doesnt matter as the disclaimer says you might make zero but seems to be so many calculators and different companys giving different quote figures for the FIT investment figure so wondering which do YOU use personally? Or how do you work it out? for example a £1000 per year...
  13. G

    How to use efficiency figures

    having a lot of trouble reading the tech sheet on panels. If a modules efficiency is 14.3% and another is 14.7% how many Watts extra is it likely to produce under STC? is there an equation for this?
  14. C

    Most optimistic Annual Yield figures - PVGIS or PVSOL?

    I guess the question is in the title! Would anyone care to comment on how these compare. I currently use PVGIS and Sunny Design to estimate annual yield and for the most part for a given slope, azimuth etc their estimated yields seem to be pretty similar. i have seen some quotes from...
  15. P

    Stats on death/injury through electrocution or fault.

    Hi just wondered if anyone had any up to date UK stats on death or injury caused by electrocution or fires caused by electrical faults resulting in death or injury. I have seen stats on domestic house fires but these were not specific as to the cause. Any pointers much appreciated:)
  16. E

    Frightening figures

    There must be at least 5 enquiries about the domestic Installers course on here weekly. Do the maths thats 5 x 52...so you are looking at about 260 DI's per annum. Off here alone. Frightening figures!
  17. S

    Confused

    Ok, I bit the bullet and bough PvSol, now I'm trying to design 2 systems on it - PC about to go out the window :mad: Can't figure out how to add the panels onto the roof (already identified panels and inverter and roof size and boundaries) Did a test report and the yield is way below...
  18. S

    can someone please confirm my working out, just for piece of mind.

    please can someone confirm my working out of a annual return, as this is my first quote and just need confirmation that i have done it right. the system is a 22 panel 180W bp mono system and i am assuming the customer will be exporting 50% 22 panels x 180W =3960W or 3.96kW this will...
  19. SolarCity

    SAP calculation figures vs. PV SOL figures

    I am becoming increasingly frustrated at the survey handcuffs we all have to wear regarding performance figures. While I can see the benefit of maintaining an industry standard for evaluating system performance, I find it a little baffling that we use such a vague and general standard such as...
  20. G

    Zs figures for a TT System

    Did a Periodic today on a TT system. The Ze was a reasonably healthy 38 Ohms and the Ze figures for the various circuits were around the 25 ohms figure. All circuits are protected by a 30mA RCD and the boards main switch is a 100mA time delayed RCD. The Zs figures are way higher than the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top