I am currently doing maintenance on flats, when people move out i go in sort anything thats broken etc and do a EICR. This may be a stupid question but i want to know if yous have any little tricks tips or suggestions to speed things up when testing ?
Hi Guys,
I am going to be tracing a fault on a cable that is around 300mtrs in a field and I wanted to prove accuracy of the meters first, I have checked to separate meters on 100mtr drums of cable both showing the same results, 1 drum of 1.53c+e showed as 103.5mtr which i would expect, on...
Evening
ive been testing an installation of new lampposts where some bollard type lights were removed and torpedo jointed to replace with lampposts or remove the lights completely. Now here's the problem the wiring is all buried in the ground 3way torpedo joints have been made beside the...
Eh up :)
So, I'm taking my 2394/5 exams at the start of December, and I'm coincidentally covering inspection and testing in my 2365. Thought I'd get some more practice in, having been appraised in (by my tutor) and confident with safe isolation procedure.
I've got a 16th edition Wylex board...
Hi all
Hopefully I'm not letting myself in for a verbal head kicking here but I'm prepared to take the risk so here goes!....
I have just completed my registration with Elecsa after going through the 2330 level 2 and 3 and the 2382 (which I did over 3 years) and I have started to pick up a bit...
Hey guys,
Currently doing level 1 in electrical installation(should be doing level 2 if I'm honest) all good, no problems flying through both practical and theory work with little or no trouble but i would much prefer an apprenticeship(Obviously) and was hoping for some advice on contacting some...
Had a call today from a prospective client who runs the maintenance for a small block of flats. They want a price for a EICR for the communal power. This bit is straight forward. In addition he explained that there are 2 x outside lights which are faulty (cause unknown). Also a light in the...
Zs of 103.00 at the sockets in a third floor flat;
(that's been lived in since it's conversion in about 1960 ish) ill go hunting for the source see if i can see the problem...................found the cellar...........ah yes..... AND a recent addition for outside power! the grey / green cable...
lister
Thread
black
brown
fault
fault findingfinding
outside
power
We've had an intermittent fault that trips the circuit breaker on the socket ring for quite a few months now. The ring for lights is unaffected.
It usually happens during the day when we are at work and then we come home to a fridge that is starting to warm up.
I've had an electrician test the...
any London based sparks out there who are a bit short of work in the next week or so, I posted a post in jobs bit but im also wondering how things are in general out there as being self employed an in a specific sector i am a bit sheltered from the real world of contracting.
Morning All
Advice and guidance would be good please. I've just come out the Army after 13 years service and for my resettlement I did the (what is known as) 'the 5 week sparky course', although I've had extensive life experience and experience over the years in all kinds of environments and...
Hi all,
I have a bit of a dilema, i visited my grandparents house a few days ago and they said the electric keeps tripping out (something up to 3 times a day).
It is tripping the main switch RCD, i have no idea where to start looking for the problem so any help would be appreciated a lot...
appspark95
Thread
fault
fault findingfinding
spark
start
tripping
where
hayy whats the best tools for finding woods , cables , metals etc behind plaster bored im fed up of drilling a hole to find beams etc,
thanks guys -mike
Mike Blair
Thread
attach
behind
best
boards
cables
finding
never
plaster
tool
Hey guys,
I'm trying to find a college that offers the 2365 level 3 part time, ideally evenings.
I completed level two but am due to move from North West to South East London/Kent.
Could anyone recommend somewhere in that region? I've emailed City & Guilds and tried Google.
Hey everyone,
i just signed up after finding the site through a random google trawl. I've just competed level 2 C&G 2365 (one year, part time) as I attempt to move across from the motor trade where I work as a general fitter and have done so for most of my life. I was hoping to enter the trade...
Everytime I get a plumber they are either ridiculously expensive, leave something dripping.... or both!!
I dont touch plumbing in my house as both times I've attempted it I've just got into a right pickle. I dont understand water, with electrics you do things a set way and it works, with...
hi,
i have been in the trade for 10 years, and have often carried work out on my own. i have had the odd apprentice come and go over the years, but they seem to get put off once they realise they have to put down there fancy cutters and clean screwdrivers, for there cold and rusty scotch comb...
Ok pretty new to fault finding. Went to a property this is my fibdings
Mcb trips NOT rcd
Split ring main tested at socket got 0.22 on l-n insulation resistance on one leg
Tested at board got o.oo on both legs??? Wtf
Circuit has sky lights and underfloor heating on it.
What is the best...
Missing-spark
Thread
circuit
fault
finding
help
live
neutral
what's
you've
im just enquiring to see if anyone has taken the combined course in Nottingham or the surrounding areas, I have asked a few places and the general price is around £800+vat, has anyone got it any cheaper anywhere else.
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc