Hi all, I am going to install some downlights in a customers property. I normally use my own which are always fire rated, however the customer has purchased her own & I am just fitting them. They are not fire rated & she lives in the top floor of 3 storey flats. I am not sure if they will...
I've just been testing a block of flats where the main water supply is plastic and goes through the block in plastic pipe, the issue is that all the flats are then fed via a meter and copper pipework. Should there be a main bond to the closest copper pipework to the main water intake and this...
Hi Guys just after a bit of advice. My first fairly big job. I've got a shop and four flats above to wire. The customer wants no gas at all so everything has to be electric. The supply is single phase on a 100amp 1361 fuse. The shop and all four flats are to have there own consumer units. I'm...
Hi all, so what would be your plan of attack.....
Gone to have a quick look at some remedial/maintenance on a domestic flat within listed building. Mixed occupancy of rented and owned.
Owner not present but another person lets me in. Im told metering equipment and incomer is in basement but...
MTI
Thread
2 core
core
domestic
flats
incomer
lighting
main
sub main
swa
tomorrow
Wonder if I can get some guidance, on max demand in block of flats. It always was hard for me as it always comes to massive demands, and I red here that it all comes with years of experience and that it is like an art. This is first bigger project I am taking on. So please don’t shoot.
I need...
Morning everyone
ive been asked to calculate the maximum demand for a conversion of commercial property to 12 one bed self containted flats. There will be no gas service available. Each flat will consist of a 32 amp socket, 45 amp shower, 32 amp cooker, 20 amp electric radiators, 16 amp water...
Hiya
Just looking at a job there is no common area supply and the flat I am going to rewire, cu- board is in the common area they got the supply for the fire alarm from his board, I want to move the board into the flat, so the fire alarm supply will be in the flat so if he is away and it trips...
tom79bmth
Thread
alarm
block
fire
fire alarm
flats
power
power supply
supply
Was at a 3rd floor flat today on a TNC-S system fed from a communal intake using 16mm t&e. The job was to replace a light and wire in a fan to the bathroom. Carrying out the tests required to complete a MEIC i found the main switch at the fuse board was burnt out with some minor damage to the...
Hi , I am have recently installed a new shower circuit in a flat which is in an block of around 20 flats.
The main service head is a 3 phase 4 wire that goes into a sub board that distributes the flats.
What information needs to go on to the EIC supply Characteristics? (by the way sub board is...
Hi all, could someone please give me some advice. I wiring some flats up and as its an old building their is currently no power to any floors. New supplies are being fitted in the basement (which is owned by a shop on the bottom floor) my question is about protecting the tails up to each flats...
as above gents, got keys too look at a house getting converted into two flats in town centre, now before i go here i know is only going to be 100A max fuse or less.
now if say i have only 100A main fuse, my options are only 40A switched fuse to each flat..... what are my options? in these...
Hi all,
I just wanted to double check what the ruling where in respect of fire alarms systems for a three storey house which is divided into three self contained flats with the only communal area being the hallway.
What grade fire system should I be looking at? Is it necessary to have fire...
Can anyone give me some advice on coding I recently carried out a EICR on a Commercial premises (communal areas of a block of flats) 3 x DB's all single phase with incoming 3 phase supply with 100A type 2 b fuses with 16mm tails going to each DB - personally I warrant this a code 2 any thoughts...
Lilyrose08
Thread
coding
demand
eicr
flats
meter
meter tails
phase
tails
7 flats, 8 seperate DNO Meters with contractor isolators for each. Lovely up until now.
Then the tails to the seperate flats are wired in 16mm T&E which I absolutely hate as the earthing conductor is not sufficient in my opinion.
Thoughts?
Hi All
just did a EICR at a cafe with 2 * flats above. Separate supply for the cafe to the flats!
Flats supply is split feeding a CU in communal hall cupboard which also feeds one of the flats via some mcb final circuits & a MCB distribution circuit to a CU within the flat! The other flat is...
craig1000
Thread
being
change
communal
flats
fuse
main
main fuse
meter
I am undertaking an eicr on 20 odd blocks of flats and would like people's opinion on this set up
The blocks are separated be about 30-40 meters apart, each in a typical square shape with stairs in the centre
Have external stairwell areas only, a ground floor and 2 other storys on top, each...
Welchyboy
Thread
block
bonding
copper
eicr
flats
situation
supply
water
I have a semi detached block of 5 holiday flats and the one I live in. When renewing the insurance a lot of companies want an electrical installation safety test certificate. So I have been reading up and it looks like I need to get tested asap.
I am worried I might need a complete rewire and...
Any ideas on this one?
I am doing a survey/eicr on an intake serving 9 flats belonging to a local housing authority. The cables are early 70's 16mm/6mm T&E run through the building structure. I have assumed the maximum draw is around 30A per flat and checking the Ze values and distance it...
I have a property that has been converted into 3 flats. Currently the tenants have to share a single prepayment meter and some concerns over effectively sharing the costs have arisen. It will be very costly to have a 3 phase power line installed for 3 separate meters, however as each flat has...
i am working on my first block of flats new build. i have earthed the main gas to the main distrabution board but all the water is coming in in plastic and is plastic throughout. do i have to earth all appartment distrabution boards to the gas aswell or not as the gas is already earthed? i will...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc