fuse | Page 2

fuse

Recent contents View information Top users
  1. F

    FUSE REPLACEMENT

    Merry Xmas!!! My Nobo electric heater has stopped working. Everything seems fine but there is no continuity in a part that I believe is a safety fuse. See attached picture. As you can see there is black from I suppose a flame and the part has on the underside a small metal piece that does not...
  2. sumith

    Can a bulb trip the fuse

    I have a bulb that causes the fuse to trip. Had it for a couple of years, make is Diall. Maybe it's dead now, but I don't understand why it trips the fuse. I did a continuity test and it fails.
  3. WILLIAM EASON

    UK Blown 13amp fuse on extension lead

    I am using a 160watt-200watt multi uv tube stand alone sunbed,When the 2 power leads (plugs protected by 2x13amp fuses) plugged into a double wall socket (protected 32amp circuit breaker)the sunbed works as it should,When an extension cable with one plug top (protected by 1x13amp fuse)and...
  4. P

    Short circuiting dough mixer

    Hi, I’ve got a brand new dough mixer which won’t work. Out of the box it just popped when switched on and tripped the power in my shop. Using a voltage pen I’ve detected that there’s power getting into the circuit board but not out. Noticed the fuse in the board was gone so replaced it and when...
  5. k281rrn

    Adexa commercial dishwasher blowing internal fuse when put onto the wash cycle.

    I have an Adexa dishwaser (7kg EMP.500 under counter style) that fills, heats and empties ok but has stopped working on the wash cycle. I replaced the internal 500ma fuse and it worked for a few minutes on the wash cycle but blew the fuse again. Ive chcked the capacitor is working using a...
  6. H

    AM2 fuse selection A2

    In your AM2 do you have to select the fuse for the fuse spur in A2 like you do in A5? Or is the fuse already in there for you? Have completed my A2 but forgot to open the fuse spur up and look
  7. rfinch23

    Replacement fuse DU/C GFE 10A 250V (PF) - 10A

    Hi I need to find a suitable replacement for a DU/C GFE 10A 250V (PF) - 10A fuse it needs to be glass fast blow Any advice would be appreciated as I am struggling to find a replacement or where I can get the same one. Thanks Roy
  8. rfinch23

    Replacement fuse U/C GFE 10A 250V (PF) - 10A fuse

    Looking for something to replace an old U/C GFE 10A 250V (PF) - 10A fuse thank you roy
  9. Waterhouse1989

    Switch fuse or rotary isolator?

    Hi we have been asked to run a 3 phase supply into a boiler house to feed a DB fed from next to the existing meter. Would we need to install Tails to a switch fuse or could we just install a rotary isolator? Just tight for space near the Meter and switch fuses are big. Thanks
  10. g3nt73m4n

    Using aR fuse instead of aM

    Hi, We used lately aR fuses instead of aM fuse. Can you please inform will there be any problem? The application is water boosting and originally aM fuse was used. The circuit has also thermal magnetic relays for motor and motors are 0.55kw. Fuses are 6amp. Thanks,
  11. J

    Zs Values for BUSSMANN - ED355 FUSE BS88 355A 415VAC

    Hi All, Can anyone help with calculating a Zs value for the fuse described in the title. The fuse sizes in Fig 3A3(c) of the 18th edition wiring regulations do not have a 355A fuse and jumps from 315A fuse to 400A fuse. I've searched and searched but struggling to find an answer. Any help is...
  12. R

    What does the main fuse protect?

    From another thread: I'm thinking about this and it's got me all confuzzled. Don't fuses protect anything downstream ie my laptop's charger has a fuse that protects the charger cable, the socket has a breaker that protects its wiring, the boards wiring has a main fuse that protects it from...
  13. Shafiq Azmi

    Why MCB and Fuse cant protect Voltage Surge?

    Hi Everyone, I got some Power Module damaged cause by Voltage Surge. My device protected by 25A MCB and Fuse. Why my device still damage although its already have the protection? Any other way to prevent this from happening again?
  14. V

    combi microwave 2900w on switch fuse or 16a supply?

    when installing circuits protected my mcb's , i have always used the 80% rule. eg a lighting circuits where the load won't exceed 80% of the mcb rating. i have a combi microwave. max 2900 watts . 2900/230 = 12.6 Amps. does 80% apply to cartridge fuses? i guess this could be classed as a...
  15. ThisWire?

    LED mirror won't turn back on

    Hi, I was having trouble connecting the bluetooth on my mirror so reset as per the manual by turning off at the fusebox. After turning it back on, there is no longer any power to the lights on the mirror, however, the charging socket still works. What could this be and how can this be...
  16. BenSparky8

    Tails and fuse sizing for flats

    I’ve got a job to quote for turning 1 big flat into 2 smaller flats. The DNO are looking at installing new meters in the communal area. I need to take an SWA from each meter to the individual flats which one is around 15m and other is around 30m away. Would a 25mm 3 core swa be the best for...
  17. L

    DPDT switch burnt while off

    Hello, I wired a DPDT switch to my sunroof 12v DC motor. It was working ok and I was able to reverse the polarity of the motor to open and close the sunroof. However days later it started to burn when off, even though I hooked up a 20A fuse before the switch. I don't know if it's a short circuit...
  18. D

    Machine Safety Circuit: Fuse Integration Query

    Hello Everyone, I have a technical question that I hope someone can help clarify. We're currently facing an odd issue with a machine equipped with a safety relay and interlocks. The interlocks have been failing, seemingly due to an unstable or 'dirty' power supply. While the ideal solution...
  19. T

    Fuse Spur connection to C7

    Can I connect a figure of 8 power lead to fuse spur rather than plugging it in?
  20. CopiamElectrical

    Fuse board upgrade (PRIVATE)

    Hey guys, Im starting to put my company out there more. And this is all a new journey for me being an apprentice and now being qualified/2391-52 qualified as well. I was speaking to a friend about how he would go about a board change which I don’t agree with. tell customer a fixed price...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top