help please

  1. D

    Help please

    I have just had a landlord electrical test done and it's being 2 weeks got no receipt or certificate. Keeps making excuses. I have paid him cash. He is in Devon. Can anyone give me any advise thanks
  2. J

    2365-204 stores requistion sheet help please

    Hi I am doing my unit 204 we have to list everything we need to set up and build the drawing I have uploaded I have written a list is there anything anyone would add to it? Thanks Please do not down load the above diagram and post on the internet. The TS is a private club and we can...
  3. R

    Help please

    Hi, i work for a company as an electrician and have done since i finished my apprenticeship, I worked for a previous firm contracting doing domestic/commercial/industrial work. Im currently in a situation where im looking to earn extra money and i am thinking to start doing work for myself on...
  4. 7

    Heating under floor heating help please

    Hello there If i could have some advice please on a heating system would much appreciated Done a few heating systems in the past with s & y plan systems however an extension i have first fixed the customer is now installing under floor heating. There is a circulation pump, a manifold and two...
  5. R

    Transportable office regs help please

    Hi, I have been asked to wire and cert a transportable storage container that's is going to be used as office. Basic ring circuit, couple of fan heaters 2x lights, db board. I am a domestic installer, do I need to be full scope to do this and also what kind of certification is required? Any help...
  6. B

    Help please signing off work

    Hi peeps I know this has probably been asked a million times i have looked everywhere for an answer but im getting Different answers everywhere i look I want know what i need to be able to sign my own work if Im nearly done on my 2365 lv3 im starting my 2392 on monday 17th edition regs in...
  7. D

    Dimmer help please

    Hello! I have just had some new lighting installed and when lowly dimmed some of the bulbs seem to flicker. The bulbs used are: 10x LAP GU10 LED Lamp 330Lm 956Cd 5W | Light Bulbs | Screwfix.com (6 on one gang, 4 on the other) The dimmer switch the electrician used is: LAP 2-Gang 2-Way Push...
  8. M

    A little help please.

    Just received a couple of Electrical Danger Notifications (C2's) from our annual electrical inspections. "No co-ordination between conductor and protective device cct 1T/P 2.5mm - 32A 3Ø ref method B" & "High values of measured EFLI at ccts 6TP-15TP" Could you offer some advice as to what...
  9. R

    GU10 extension ? Help please

    Hi there.....I am a complete novice at electrical stuff, so sorry if my wording is not right... in my new house there is no bulb in one fitting/socket (the bit the bulb fits into!) in the bathroom ceiling. when I have looked at it I have found that the fitting/socket will not reach to the...
  10. G

    broken core work round, help please

    Hi gents, advice please new conversion, in bedroom newly decorated hi wiring was carried out about 4 years ago but this part of the house has just been finished. we have two 5A sockets for table lamps either side of where the bed will be. also have to wire in/connect the wiring for 2-way...
  11. S

    need some help please.

    hi guys, i am looking for some advice please. i have moved into a new house, once i had moved in a setup my tv and set top boxes and that i found i had a issue. the set top box i use to view my tv is a xtrend et 8000 and i found that when i was turning lights and plug sockets on and off it...
  12. A

    Help Please

    Hi people, Ive completed the 2330 level course at college and passed all my exams and my am2, i am also doing the 2356 level 3 nvq its about 80% done, but due to the fact i mainly work on domestic houses i having trouble finishing it as it cant all be domestic, hopefully i will, but if i go...
  13. R

    Apprentice Help Please :)

    Hi Guys , currently an apprentice in a factory that makes polythene my job is a maintenance electrical Engineer , fault finding, pneumatics , basic engineering and electrical repairs , I.E Motors failing fuse changes, switch gear also oil changes , gearbox changes. Im currently enrolled on an...
  14. D

    Am2 help please

    Morning chaps . finally got round to booking my am2. I know it changes a fair bit so was wondering if anyone here has done it recently or has an informed idea on what's in it now. I've been in the trade some time now so I'm sure I'll be OK. I have my 2391 ect . I just hate exams and well any...
  15. S

    A little help please

    Evening everyone. Im working on a large house at the moment and need some direction with the heating system. As far as wiring goes I can handle basic systems but this is one of the larger ones I have worked on. Two boilers are warming a header tank. From the header there are three separate...
  16. L

    Electrical exam need help please.

    Good evening. I have an exam next month and I am really struggling on a certain section of it. The section is on motors which is something I never ever do. I just house bash. I've put the link at the top of he page. The post is number 324 and its the bit where it says motors obviously. Any help...
  17. A

    Cat 6 help please

    Im just trying to get my head around this. Basically how do cat 6 systems work, for example a simple intercom system for a flat where you can buzz them in and can speak to them from the intercom phone.. Where would you get a supply for this because its not just like twin and earth where you...
  18. G

    Pir sensors outdoor lights help please

    Hello all i installed some post and spike lighting for a client switched via a 360 degree PIR controlled by an outdoor light switch now the clients wants to be able to flick a switch so his outside lights can over ride the sensor and remain illuminated until he switches them off then to be...
  19. N

    Basic help please

    After testing a lighting circuit Got feedback saying my result is wrong / iffy :nopity: B6 MCB, 1mm 2 cable Measured RI+R2 = 0.69 Measured Ze 0.34 Measured Zs 0.88 Calculated Zs by adding Ze + (R1+R2) = 1.03 Allowed 5.82 80% rule I can't work out why my result is wrong - what am I missing?
  20. G

    Star delta fan wiring help please

    Hello there have been asked to fault find on a clients 3 phase star delta fain in a grain store. the client purchased the fan second hand and I have power across the contractors but no power on the out going side. no wiring diagrams either. Can anybody give me some in what to check for and...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Advert

Back
Top