inspection and testing | Page 5

inspection and testing

  1. P

    Periodic Inspection and Testing on Industrial Site

    Hi, Firstly, i am new to this forum and am looking forward to hopefully getting invovled in some of the topics discussed. But my first post is going to be a question. I visited a site yesterday we regularly do new install work for and the client asked me the question on periodic inspection and...
  2. I

    Periodic inspection and testing label.

    hi there when you add a circuit to a C.U. where there is no existing label for when it was last inspected/tested, is it permissable to place your own pir sticker on the C.U. without carrying out a EICR. if you write UNKNOWN (last inpection) and ASAP (next inspecton) or is there another way ??.
  3. HandySparks

    When to use the periodic inspection and testing label?

    BS7671 Amdt 1, 514.12.1 says: A notice .... shall be fixed ... upon completion of the work carried out in accordance with Chapter 61 [initial verification] or 62 [periodic inspection and testing]. "Important, This installation should be periodically inspected and tested ... Date of last...
  4. rustynails

    Inspection and Testing Exercise

    Allright ppl, I've bought this book and have stumbled working on exercise 2 p174 (if anyone has the book). In particular the completion of the test results for the given circuit, which is a 63m ground floor socket circuit consisting of 8 socklet outlets wired in 2.5/1.5 pvc twin and earth. 2.5...
  5. S

    Touring Caravan Inspection and Testing

    Any tips and advice for inspecting and testing a small touring caravan would be much appreciated (over and above that required for a domestic dwelling). It has: 12V Igniter for gas water heater, igniter for gas cooker, igniter for gas fridge (burning gas to keep a fridge cold (what's that all...
  6. J

    NICEIC Certification Scheme NICEIC inspection and testing qualification

    Hi, Was wondering if anyojne had done this training course? its apparently exactly the same as the 2391 but not recogniosed!! as im on the NICEIC course should i just do this or go for the 2391? or have both? im unsure on it as i dont want to waste my time thanks
  7. W

    2391 Inspection and Testing- Help needed

    Hi, I want to do my inspection and testing, I've been talking to the local college about a course they are running next month on a Wednesday for 5 weeks. They said I have to do a entry exam which they have put me down for next Friday. This is the last time they are running the course as she...
  8. J

    Inspection and Testing

    Hi to all you sparkys out there, I am a part p qualified electrician and a member of Napit,I often read threads on this sight and find it very useful. I now need to go the whole hog and do the inspection and testing 3291- exam. I live in west London,can anyone recomend a reasonably priced course...
  9. S

    Can I do my 17th edition/2391 inspection and testing

    Hi I'll be sitting my final exam for my 2330 lv3 course, I was wondering if I can then progress on to do my 17th edition and 2391 inspection and testing? On the C & G website it says the 2391 is for qualified sparks. Does that mean I have to be working in industry to do it? Also another member...
  10. P

    What is needed to produce relevant inspection and testing certificates?

    HelloI was wondering if someone could point me in the right direction! Basically I wanted to know What is needed to be able to test, inspect and certificate my own work as an electrician?So I can basically sign off my own work, producer periodic inspection certificates, schedule of inspection...
  11. D

    Which qualification for domestic inspection and testing?

    Sorry for this basic question guys, but I'm having a hard time getting to grips with which C&G is required to qualify me for domestic inspection and testing of old installations. 2392? 2391? A friend of mine is having trouble with nuisance RCD tripping in her 1900s terrace, so I said I'd do a...
  12. M

    New installation inspection and testing commercial question

    Good day I am currently testing an installation of a new sub board which is on a network of sub boards.What would I put for for supply charteristics?Would it be the supply MCCB at source of the network of boards?I would be very grateful for some help. Regards Mick
  13. R

    2012 inspection and testing writen exam (very eassy paper

    hi,buddies today was the 2391 written exam and i must say that it was a fairly eassy paper, and i'll be disapointed if the national average success is gone to be as low as the december 2011 one (37%)
  14. B

    inspection and testing of an electrical installation exam.Please help! :)

    Hi guys I hope you'll help me on this one. I've got an inspection and testing exam tomorrow and the day after . Looking at the drawing I can see the 30 mA RCD with the extension CU but no RCD for the shower on the main installation CU.As far as I know according BS7671 an 30 mA RCD or less is...
  15. ackbarthestar

    New Inspection and testing qualifications !?

    Now, as I understand things, the I&T qualifications are going to be revamped for 22nd century working methods.... 2392 level 2 in initial inspection and testing. This is staying the same. 2393 level 3 in understanding how the approved documents fit in with the electrical requirements. This is...
  16. Z

    The ULTIMATE GUIDE for BS 2391 Inspection and testing Exam

    Hi guys, ----------- website has a new very detailed and useful guide for the Inspection and Testing BS2391 exam. Just search in Google for ----------- and you will find it. Have fun!
  17. R

    PAT Testers and Inspection and Testing Testers/Software

    Hello People, Im looking for some recommendations for PAT Testers and Multifunction testers for Inspect and Testing and software. We have in-house Maintenance team and we look after several sites so i need a good database that i can download/upload etc. At present we have the Seaward...
  18. J

    Help with inspection and testing

    Hello I connected caravan from house's consumer unit. I added to consumer unit B40A MCB protected by 63A RCD, 10mm2 (3 core) armoured cable (was 70 metres from house) It is done, but I'm not sure what I need to test. When I was in school my teacher said me that I can test only circuits which...
  19. S

    FICA/AM2 - Inspection and Testing (IR)

    Right guys, first post! I'm re-sitting my FICA Inspection and testing tomorrow, it's the only part I failed during my first attempt. I'm pretty confident about the continuity tests and the live testing, i'm just not 100% on the Insulation Resistance. As far as i'm aware, I disconnect the...
  20. Z

    NICEIC Certification Scheme Periodic Inspection and Testing for NICEIC

    Hi guys, Is it true that NICEIC requires that the PIR testing is the 100% of the installation? I have always tested around 50-60%, but now I have client who is saying that the NICEIC wants 100%. Anybody knows about this? thanks!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top