ip65

ip65

Recent contents View information Top users
  1. Alla Musica

    Downlights: Integral Evofire, or JCC Fireguard IP65?

    Hi Folks, I'm looking for downlights that satisfy the following criteria: (1) white bezel; (2) fire-rated; (3) IP65 or above; (4) anti-glare; (5) GU10/MR16, not integrated LED. I've shortlisted the Integral Evofire Recessed (low-glare) and the JCC Fireguard Anti-Glare (IP65 variant). To me...
  2. P

    IP55 or IP65 (or better) rated TPN board

    We might need to have a small 3-phase DB in an industrial location that might be exposed to the elements occasionally, though normally it will be covered if rain, etc, is happening. Total current is no more than 32A but I am struggling to find any sort of conventional TPN board that is rated for...
  3. Shaun H

    I thought these JB's were IP65!!!

  4. F

    wifi switch for shed lights installation ip65

    Hello i am looking for a wifi switch that would be suitable for a shed workshop Ip65 rated, that would be able to be wired so that the standard weatherproof light switch for the shed lights will still be able to be used to turn them on and off but that i can also use the wifi switch to turn them...
  5. Old Time spark

    LED GU10 in IP65 fittings externally

    GU10 LED lamps fitted externally in IP 65 fitting Hi, anyone know or had an issue with LED GU10 lamps in an external fitting failing? Fittings installed with lamps last year, job been delayed with Covid, just started to power up and find half not working, they are twin up/down lighters, most...
  6. T

    Replacing 12v MR16 (not IP rated) with GU10 IP65 rated downlights

    Hi, I have to replace bath and shower downlights to IP rated. I thought they were GU10 so bought the GU10 fitment and bulbs. I fitted it and it did not work ? I then found out the original fitment is MR16 12v. Please can someone tell me if I need to buy IP rated MR16 downlights and LED MR16...
  7. Buners

    For Sale 11 X Dextra 2.5W 3Hr Maintained LED Bulkheads IP65

    I have 11 LED emergency bulkheads, all brand new in boxes, they are Dextra brand, 3hr Maintained fittings, 2.5W, IP65. I have checked postage and with Hermes it is £8 due to the weight and size of the box any interest give me a shout, no idea what they are worth but would just like them to go...
  8. P

    2 RCD's - are they needed

    Hi I’m looking for advice on the following: I’ve yet to contact my local council about installing a light in Zone 1 of my bathroom (this due to height restrictions) but reading up on it in order to get ready for the off I thought it wise to check out my understanding / intentions first. The...
  9. S

    DIY 16mm2 IP65 Junction box problem

    DIY poster : Hello, I am trying to connect two 16mm2 wires together in an ip65 junction box, but the holes are not big enough for the both the wires to push into. I am looking for a junction box that can join two 16mm2 wires. I have tried googling , even ordered things I though would work, but...
  10. dogbob

    How to connect IP65 LED flood to wall box

    I'm looking at installing an imported IP65 LED floodlight with CE rating on the back of my house. I guess that IP65 + CE makes them relatively safe. This one has a cable gland and 0.5 meter vinyl jacket cable coming out of the back. Here's a photo of the back of this light, from the dealer's...
  11. S

    Garden Room Consumer Unit in IP65 Meter Box on outside wall

    Hi guys, quick introduction, I am only qualified as a domestic installer, not a full sparky. My company builds bespoke garden rooms. We have been asked to supply an outdoor dining room for a client and they are extremely keen on having the consumer unit and under floor heating controls on the...
  12. 1Justin

    Recommend a IP65 consumer unit please.

    Could someone recommend me a 7 unit wide (minimum) IP65 consumer unit? Plastic is OK, - it's for a horticultural site in a polytunnel. I find Garo, Protek, any others? (Looks like I'll have to populate it anyway with A.N. Other breakers and parts). I want want robust enough to take several...
  13. Andy C

    Best IP65 adaptable box with Din rail for outside placement.

    Hi All, Quick question, I am going to provide a supply to the above from the far side of a house to intern supply 32A to a large hot tub and also a supply for some later outside lighting and maybe a patio heater. What reliable box would you suggest? It must have a din rail and 2 connection...
  14. J

    Brass ip65 adjustable downlight

    anybody know if you can get these and if so where can i get them ?
  15. B

    Ip65 Led Lights

    thought I`d offer these here first as my customer has gone bust need to recoup some money so am offering 8 ip65 rated fittings 4 ordinary 4 emergency these are led, not led tubes but led strips inside these are quality itab fittings part number :lac/5t24/13/4k ordinary fittings and...
  16. gazdkw82

    Ip65 10w LED pir light

    My parents have a small old halogen light above their front door but it's stopped working so Iv got them a ip65 10w LED pir replacement and ip65 JB. they have a t&e flex running from the Halogen light through the wall above the door, tacked to the wall and hanging down. The flex has a standard...
  17. M

    IP65 rated Gimbel

    Hi is there such a beast as an IP65 rated led gimbel small bathroom vaulted ceiling thanks
  18. D

    Ip65 rated junction boxes under baths? Help

    Hi, my friends got a spa bath and wants it wired in. I was thinking of running some 10mm t&e under the bath into a ip65 junction box, then into the pump underneath. I can't find anything in the regs or part p which says anything about this so could to with some advice. Also would need some type...
  19. J

    IP65 Cabinets by the pallet load!

    Hello Company I work with have been let down on a contract and have loads of IP65 cabinets in their warehouse. Its dead stock to them now and are looking for someone to take them off their hands - could be a deal in it if anyone has the right connections to take advantage. 400 x 600 x 300 -...
  20. G

    Ansell low bays 250 watts + IP65 luminares and other stuff for sale

    I'm not an electrician and have had a nightmare of a time trying to sell my Dads stock. I have shifted nearly everything but 11 low bay ansell 250 watt low sodium lights, 1 pre wired 5pin comination unit, 6 IP65 units (+bulbs for them) and some miscellaneous switches fittings bulbs etc I am...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top