knowledge | Page 8

knowledge

  1. D

    Would i know if I’ve accidentally drilled into cable

    Hi all, new here and just after a bit advice. I won’t pretend to know the first thing about electrics as I don’t at all. Basically I’ve just recently plasterboarded a huge new build extension and I got thinking/worrying the other day in case as some point I could have accidentally drilled or...
  2. D

    DIM (do it myself) - just want to know how to have a conversation on this site.

    I am just wanting to know how to have a conversation on this site, specifically to find a single plug socket plus fused spur combination.
  3. rolyberkin

    Dali Lighting System - Anyone any knowledge?

    Following on from my Helvar thread! I have what I believe is a DALI lighting system (Made by Helvar), 12 channels fed from a board with all switching controlled by Cat 5 to a central computer. Helvar are not playing ball and will not supply me with the software necessary to alter the system and...
  4. Sambulance

    Does anyone know this design symbol?

    Can anyone tell me what this symbol represents? I'm assuming it's something to do with a wall light, possibly something to do with a vanity section as its in a changing room but I can't find the symbol anywhere. Cheers!
  5. O

    Anyone know anything about Super Subbie?

    Hi, I'm new to here, but just wondering if anyone knows anything about Super Subbie? Saw their advert on TV the other night and I'd like some new way to look for work without the bad rep of checkatrade etc. Any thoughts?
  6. Ian Howe

    Does anyone know what this box is for?

    Any of you knowledgeable people know what this is, 2 of them are one the ground near the front door of a house I'm purchasing.
  7. Malcolm

    Anyone know what this light is called?

    Hi all. As the title states, has anyone seen where to get one of these from or know what they are called? Sorry about the people in the picture. All the wiring must be behind the metal plate on the ceiling. What looks like the cable dropping down to the light is actually a metal rod. The live...
  8. pirate

    Ok, I know it's just me...but what is it with "hoodies"?

    I have had an aversion to them for some time, but today as I drove, very slowly due to the density of traffic, along a popular thoroughfare in Glasgow, I spotted 20 men in hoodies in a 500 metre stretch of road. It was a beautiful day, sun shining, 18 degrees, blue sky...but there they were...
  9. sham

    Does anybody know of this new regulation that omits the ZS test.

    On another forum about an high ZS reading about a fused spur feeding a boiler, someone replied that in the new 18th regs if the RCD breaks the circuit within time under test you do not need to check ZS, just R2 continuity test for CPC continuity would be good enough. You just put N/A on the...
  10. telectrix

    UFH brain teaser. think i know but......

    existing UFH (2 mats each 1.8kW) installed c 2015. on a single stat by a,n,other. customer had someone else replace stat. made a right mess of it and stat fried. I then get called in to fit new stat. removed the dual back box that previous guy had smacked out with a hammer so as to fit the new...
  11. buzzlightyear

    what do wet pants know

    been to price up a job ,customer had a electric shower/ and tray fitted by a wet pants .customer wants me to connect up .up stair bathroom .now all the walls are plastic cladding had a look in the bathroom ,mmmm now where is the isolator me was think looked at the ceiling not there out...
  12. S

    Learn AC current and voltage by every electric machine or electronic circuit you know

    I want to learn how AC works and I have no idea what I should use as an AC source since I never used one.I only know of inverters but that's not really helping me in understanding RLC circuits....Are AC sources real?Are they batteries?I'm new in this and I can't think of a device or something...
  13. cliffed

    Lost the will,but I know...

    Mind gone kaboom,is it ok to put plastic trunking above DB,3X 3 inch, to adhere to IP requirements.
  14. L

    Free labour for your knowledge and expertise, 40 hours a week.

    Good morning. Forgive me if I'm posting in the wrong section. Having already done 2330 level 2/3 and 17th edition. I have some knowledge but would need refreshing. Working with someone with experience I'm sure I would recover knowledge. I'm more than happy to come and see you. Happy to start...
  15. M

    Help! Absolute novice doesn’t know what he is doing

    I am not an electrician but fitted a few light fittings and thought it was pretty straight forward but that is the extent of my knowledge. This one, however, wont turn off. Just moved into a new build and took previous light fitting from my other house. When i have fitted it, the light wont turn...
  16. Pete999

    Pete's Videos I know it's old hat.

    I found the very subtle digs at Ms Clancy's presentation very amusing, the pictures of wads of cash appearing everywhere, the Chap sat behind Her right shoulder, smiling in what I thought was disbelief, worth a watch.
  17. the pict

    HSS Drills any one know good quality make

    I am about 3/4 the way through a trailer build all stick welded, and now I am attaching lash points etc I bought a well known diy brand but got 2 x 8mm holes and its knackered I know I can be a bit heavy handed at times but come on 2 holes, so I am looking for what my Granddad used to call...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top