led | Page 10

led

  1. A

    Replacing 12v GU4 downlighters with LED.

    In the bathroom we have a panel above the wash basin with 3 x 12v Halogen downlighters powered through a single transformer. I am looking to replace the halogens with LED equivalents with a 12v LED driver. I have removed the bezel and there is a very thin black plastic ring but I can see no...
  2. T

    Cable requirement for 240v LED 6w downlights?

    Hi Simple question I think - is there a specific cable requirement for connecting up 240v 6w LED downlights in a daisy chain extending the current lighting circuit? Probably going to have 6-12 lights running off 1 switch. Aware needs to be 3 core with earth to all lights - more the rating of...
  3. I

    LED light fixture flickering after changing switches

    Hello everyone, I recently changed a 3-way normal switch to a smart one (Kasa HS210). Both are not dimmable. The LED light started flickering after that. The problem remained even after I replaced the old switch back. I have tried tightening all the connections and wire nuts. These are the...
  4. K

    Ideas on how to install SELV LED on wireless switch?

    Hi everyone I am going to install LED lightstrips in the garden which would be on the SELV and obviously it needs to be installed using stepping down transformer however the lights needs to be on wireless switch technology which would require another transformer to feed the stepdown...
  5. Bowmeat

    Workshop led lighting help

    Hi all , hopefully somebody on here can help me out, I recently went to change a led unit in a workshop , cut power ,changed led unit , then when I switch power back on it didn't work and also took the bank of 5 lights down with it , disconnected it and the bank still doesn't work, checked...
  6. B

    LED Light Bar - drunken ebay purchase

    I drunkenly bought a 4ft LED light bar on ebay. It supposedly lights up in different colours. Now that it has arrived, I have no idea how I am supposed to connect it - and I suspect it may be intended for commercial use. I don't really know what I ultimately intend to do with it - but now that...
  7. B

    Installation help UK

    Hi folks, I just have a few quick wiring questions I could do with some help with please. I'm in the UK. Following advice on here and other places I'm changing a couple of rooms from 12v halogen gu5.3 to 230v LED light fittings. There currently is this round connector linked to the live &...
  8. H

    600x600 LED panel labour cost

    How much are people charging per 600x600 LED panel? This is only for labour as client is supplying fittings.
  9. O

    DIY two gang light switch LED issue,

    I have an electrical problem. I've a two gang switch and have just replaced some old 70s lights. I've matched the wiring but has an issue. Switch two works and switches light two on and off. Switch one however only dimly lights the first light. I've no idea why. I've not touched the switch in...
  10. N

    LED Filament Lamps.

    There was a discussion some time back that wound its way to the subject of LED filament lamps - specifically those with fairly high output - but I can't seem to find it now. I'm trying to find B22 GLS lamps producing around 1000+ lumens, but it's proving difficult without paying considerable...
  11. L

    Matching led drivers

    Hi guys - I need to replace an LED driver for one of my downlights. I know how to make sure the bulb is compatible with the driver, but as I can’t find the exact same driver as those which connect to the other bulbs, I’m worried that it might perform differently to the others. My question...
  12. S

    Dimmable LED flickering

    I have 9 led strips fitted to a bookcase which is operated by an LED dimmer switch. The lights all turn on, off and dim, but after they have been on a few minutes 3 of the lights begin flickering constantly. Is this an issue with the lights or the dimmer switch? Thanks
  13. Vladimars

    How best to hardwire a led mirror?

    I'm buying my wife a led, anti fog mirror for her birthday and it recommends hard wiring to be connected to a wall switch. I don't have access to above or behind the wall in question, what is the best way to hook this up? Run a wire from the light above the mirror? Or try to go around the corner...
  14. P

    Auto Electrical - LED Lights

    Good morning knowledge base. I have a project involving auto electrical (so 12V DC, or 13.8V on a good day) and LED lighting. I have a pair LED lights (total 60W) that I would like to be dimmable via a switch. The lights will therefore be fed by two circuits (one with a fixed resistor for the...
  15. J

    130mm 150w metal halide led equivalent

    Have metal halide double ended 150w industrial lights. Is there such thing as led bulbs to swap direct into the units? Or does the startup units or whatevers in them not work for direct replacements? Thanks
  16. C

    suggestion for LED Gimbal lights

    I'm looking for a 6" recessed, dimmable, LED bulb (not integrated) no-can ceiling lights, with gimbal, J-box, and able to be in contact with insulation. They are for a vaulted ceiling in a enclosed porch. I'd need about 1000 lumens per light and going to need 8 of them. I would really like a...
  17. S

    PIR Light Switch on LED Spot Lights

    Hi, I have a downstairs toilet with two spotlights. I have recently replaced the MR16s with two GU10 LEDs. This has meant that my PIR makes the lights flash repeatedly. I have another PIR in the utility which has 6 spotlights on (all GU10 LEDs) and this one works fine. I have tried swapping...
  18. B

    Wiring LED Lighting Strips to Lighting Circuit

    Hi, I have bought a LED Lighting Strip (20 metres) to sit inside some Screwfix coving for my bedroom. Although it will be controlled by the remote control that came with the kit or the app, I would like to use one of the switches in a 1 gang/2 switch to turn it on and off at the wall before...
  19. E

    Led security light query

    Hi all, I have just replaced my old broken security light with the light in the following link. FEAHRZEUG 30W Security Lights... https://www.amazon.co.uk/dp/B09NKN99VH?ref=ppx_pop_mob_ap_share When I wire the light up with the old lights wire it is very very dim. When I wire the light into...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top