I'm encountering a problem with the lighting in my kitchen. I reside in an apartment that has a light fixture utilizing 2 T8 fluorescent bulbs equipped with an electronic instant start ballast. I'm looking to upgrade them to LED bulbs. I have taken out the ballast and wired the tombstones...
Hey all, hoping someone can help with a particularly annoying problem! Have changed a load of LED downlights to the fixed bulb Centorio type (14W, colour adjustable,dimmable with remote) and all 8 are fed from CBUS relay channel.
The strange thing is, they work when first switched on, but then...
HI All - need to run supply cables from the drivers to the ribbons in a new build. Its an ICF so will have min 10mm of plaster plus finish applied to what are effectively block walls. - Do i need to chase in the 12v DC supplies? and do i need to put these in conduit? - or is there a...
Hi guys
Looking for the best brand or supplier for LED striplight
It need to be IP rated with a length of 7.6m and a leader of 3m.
It's going to be mounted on Soffit boards illuminating down over Bi-Fold doors
Probs need 24v
Cheers
Hi,
I was having trouble connecting the bluetooth on my mirror so reset as per the manual by turning off at the fusebox.
After turning it back on, there is no longer any power to the lights on the mirror, however, the charging socket still works.
What could this be and how can this be...
Hello. Recently I've purchased some led lights for my trailer. Secondhand no wiring guide. Led wire colours are white,black,red,yellow and green. I have standard 7 wire cable and socket from old lights. Any help would be appreciated
I installed these round light fixtures in my office 23 years ago. After a few years the circular flourescent tubes went out and I replaced them. Those finally died and I bought these nifty LED replacements. They have 5 strong magnets on the back, I wired them in, stuck the magents to the back of...
Hi (Im DIY - with an electrician to install), does anyone know a UK supplier of IP rated lightup LED tiles suitable for permanent outside use (dancefloor)? 600mm x 600mm. Thanks, Ian @ Wilby NN8 2UE
Hi All
I have recently had a new bathroom mirror installed with a built in LED and Demister that is turned on using a motion sensor.
The mirror works perfectly, except when there is a power cut. When the power is restored, the mirror LED automatically turns on, this is not ideal if we are out...
I am lighting my workshop with LED's. I had all 13W (1500 lumens) but wanted more light on the benches, so ordered some 23W, which is supposed to be 2500 Lumens, The 23W seemed only slightly brighter than the 13W, if at all, so I tested with a "Kill a Watt" meter. The 13 W showed a true 13...
hello
soooo...😅 i recently changed all the light switches in my house. now i saw a video that showed the 2 tiny wires inside the switch should be connected to the "in" and "out" thingies. BUT, before installation, i stick them in a power outlet (witch has a phase and a zero obviously 😎) and saw...
I would like to install a plug as the original one has been cut off. It has a black sleeved wire but also a non sleeved cable with no indication whether it is a live.
Can you please advise which type of plug I need for this?
Many thanks
Does anyone know of a product similar to the Integral LED 70-100mm range (linked) that allows you to adjust the lamp direction? The client has a few that are shining onto paintings, but we would like to be consistent with the bezel size...
The stately home I work with has asked me to repair a couple floodlights not working.
Mounted very high up… I could hang over the roof and checked the lamp, which was ok… but noticed water behind the glass.
Am building scaffold tomorrow to check the supply, although non-contact was indicating a...
Hi all
as mentioned I fitted two new stedi led indicators to my Suzuki 2018 drz400sm the front ones not stedi were fitted by the previous owner but seem to be running a little fast however the new rear ones would only flash twice then stop same every time I called the store and was told they...
Hello
I have recently moved home and I looking to upgrade lighting across the house to LED.
In the kitchen I have found that there is installed a mains powered lighting circuit which serves five LED lamps (surface mounted and recessed) Included within the same circuit is a junction box into...
Hi. I’ve got two pendant lights that currently run halogen lamps. One of the converters is broken so I’m planning to change both for LED lamps. Please could someone let me know what LED charger I need to buy for this. Ideally Amazon for quick delivery. Photos of the lights and the existing...
Hello,
I bought this LED lamp with 3 light tones (white, semi-yellow and yellow), and the problem is, every time I switch it on, it automatically changes to the next tone. I just want to choose one tone and turn it on always, and not change it at every switch on. Insides of the lamp on picture
Hi there,
I'm hoping someone may be able to advise on whether my LED floor lamp can be repaired or not. The cable has split from the plug, as per the below photos. Can anyone recommend a replacement plug/transformer + wiring? There's a join under the base of the lamp, which you can see in the...
Hey all,
So this is probably a quick question.
I have some under-cupboard kitchen light tubes that are old and have clearly blown at some point.
Would like to replace them but have two questions:
1. In the attached photo, you can see the product identifiers, but an internet search doesn't bring...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc