leds | Page 6

leds

Recent contents View information Top users
  1. W

    leds glowing

    hi guys, can some one give me some information on a problem i came across. i have a multicore swa cable switcing on pier lights and garden lights, however when the pier lights are on one of the garden lights starts to glow. i checked voltage at light and it is receiving 40 volts, and what makes...
  2. W

    Telling the difference between good and bad LEDs

    does anyone know of anywhere where i can find useful info on what constitutes a good LED lamp or a rubbish LED lamp? someone has told me to look at the 'fins' which are to do with the heat dissipation - is that correct?
  3. T

    Stable lights, Possible LEDs any recomendations?

    Hi, I ve got a lighting job on a new internal stable block on a horse yard. What would be best, IP rated fluorescent batterns or could anyone recommend any LED lights as the owners are keen on keeping the running costs down. I have seen some 10w led flood lights on the TLC website for £20 each...
  4. P

    Haler LEDs and Aurora LEDs

    Hello all I winder if anyone can help me with my 2 questions I have fitted 14 Haler led lights 7.9w in a kitchen when I read the instruction booklet it says Haler recommend no more than 15 lights on a type B breaker why? If its only 118.5 Watts 2nd I fitted 10 Auora lights today 9 watt led...
  5. C

    Leds gu10 spots in my kitchen

    just after some advice/ideas im putting some cladded eiling up in my kitchen and some downlights, just finding it hard on how many to put in, my kitchens 4meters long and 3 meters wide , so i was going to come 1 meter off each wall and have 2 rows of 3, but im worrie this wont be enough, what do...
  6. A

    LEDs... whats up here?

    Hi Guys I retrofitted some nice 7w LED gu10s this morning. fine. Turn them off later today - nope. Still on and probably as bright as before. Simple existing switch with no voltage on the load side when open and earth active at the switch. And no two way circuit. Really dont see how...
  7. S

    For sale: 8 x K.S.R Gu10 leds

    for sale, 8 x new LED GU10s, 4.5 Watt, cool white, non dimmable. Part number :KSRLP853 I have got 8 KSRs left over from a job and the wholesaler wont take them back. I am looking to get back what I paid for them (£22.50). PM me if interested.
  8. G

    1W LEDs glow slightly when switched off!

    I have 1w LEDs in the hall and landing connected via two way switches. The switches are connected via a three core plus cpc flat cable. When I switch off the light, the LEDs show a little glow all the time. Any ideas?
  9. A

    Flickering LEDS!!! Whassup guys???

    Mate, I've just installed 20 LED 5 And 7 watt gu1o LEDs in place of mainS voltage... all operating on a switched fuse (already there!) and... turn it off.. there's flicker!?!?! No cables running alongside. Although there maybe on the sfy=u load cable as there dare other sockets nearby. Its...
  10. L

    I can help with leds

    Hi, I am new here and wanted to offer my help with anyone who needs any help or advice concerning Gu10 led's as I sell thousands of them every week. Feel free to pm or thread.
  11. cliffed

    leds

    Anyone havin any problems wiv leds lamps,jus installed load of 11watt led fitting wiv the driver built into the lamp ie 230v 11watt leds,these r controlled by a danler soft grid dimmer,& slave dimmer,so they can b 2 way from door to bedroom,major probs on actually fitting the dimmer onto a 35mm...
  12. R

    Need help with dimmable LEDs

    I'm building a shelf with LEDs, and I want to be able to dim them. My question is, how do I do that? I'm a major DIY'er so I'm not going to hire an electrician. I'm a real nooby on this subject though... What I figured was that all I need is a regular power source (I live in Europe so...
  13. R

    Dimmable GU10 LEDs?

    Hi, i'm new to the forum and wanted to know everyone's thoughts on the best dimmable Gu10 LED at the moment. Doing up my kitchen and i thought we may as well try and be energy efficient with our lights as well. i currently have mains voltage downlights and i want to change the lamps in them. any...
  14. P

    low voltage ip44 leds in bath panel??

    Hi , just want your thoughts on this , tiled bath panel sealed , with ip44 leds in the tiles, wired from existing switch , switch powering socket in loft lv transformer in plug pluged into skt and wired to leds in bath panel, psc current of low voltage? because there is no earth in the lv...
  15. N

    Leds in 18mm MDF - Help

    Hi Guys, I was abroad and I saw Leds in 18mm bedroom doors, actually fitted in but i don't know how they were fitted in because when you opened the door there was nothing on the back, only a couple of wires coming out if the bottom hinge that went to the back to the wardrobe, I would love to...
  16. N

    LEDs

    Hi all, I'm new here, and for some of you this will be absoloute basic electronics I dare say, but I need an answer, and quickly if possible! So here's the crack. I need to wire 1m of red LEDs and 1m of green LEDs for display purposes only - so they don't need to be mega bright, and they...
  17. J

    ghosting on leds

    hi any you guys had this problem. fitted 6 off inset leds in a hallway. look fantastic but when switched off there is a small glimmer from the leds .bit like ghosting on a neon screw driver.had a look found when i remove the 2 way switch and cable all ok. tested the cable and switch perfect.its...
  18. M

    12V LEDs

    Hi everyone, I just joined, but I already have an irritating question. My client bought these MR16 LED lights for his kitchen - along other works I am to install them. The first one blew out immediately almost. I haven't dared put in the next yet, but I had no idea at the time what could have...
  19. telectrix

    LEDs

    just found these----------- (GU10 fitting) 12 LED, 1watt GE LED lamps, quite a good light for what they are, £4 a pop from Asda
  20. M

    MR11 leds flickering

    Hi, i've just replaced some mr11 gu4 halogens with led lamps, they all work but ocassionally they flicker, there are 2 12v 105w transformers each with 5 lamps, only 1 set will flicker at any time so i'm ruling out a mains fault, has anyone experienced anything similar? are there specific...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top