I just wondered if anyone had any tips for testing an irritating design.
It's a large self-storage facility, several RCBO protected lighting circuits serving two floors, no light switches anywhere, just PIRs on radial circuits controlling about 4 lights each and there's about 30 such setups...
I bought some outdoor festoon lighting a few years ago and the 2 pin connectors (male and female) have corroded so I’m going to splice the connectors together using heat shrink butt connectors. Each run is 5m with a male and female 2 pin connector at each end. My first thought was that this...
Hi
I'm again struggling with a long overdue 2396 project but, as before, am at a standstill when it comes to the lighting design.
Please could someone point me in the right direction? I don't know how many luminaires there should be.
The scenario is a fire station appliance bay built for two...
Hi All,
I am currently in the process of building an extension and I need to purchase some led downlights for my kitchen but unsure how many I should
buy as the last thing I want to do is for my kitchen to look like an Airport runway. Is there a formula of some sort to work out how many...
I have a lighting circuit cable (1mm) powering a telescope (12 volts) in an observatory total draw 84 watts drawn from a transformer. There is a 6 amp fuse in the consumer unit. This was installed in 1998 by a qualified electrician. Is this still legal or should it be upgraded?
Thanks
Electrical2Go - Get Bank Holiday Ready with our lighting deals!
For this week only, we are offering unmissable deals on garden lighting, as well as giving out FREE mini fridges and portable power packs with every purchase of the V-Tac power stations. All the information you need is below. Be...
So a family member wants to put an outdoor light or two on the end of a driveway, purely passive and solar powered. These used to be naff and not worth it, but I know technology has come on. Lots of units out there but which ones are actually worth the buying?!
My kitchen has track lighting.
It consists of three halogen light bulbs.
I've had the fixture for more than 25 years with no issues.
Last night as I was standing in the kitchen all the lights went out.
At first I thought it was a power failure in the neighborhood.
But I quickly saw that there...
Hello all.
So I am sure the expertise on this forum will be able to decode this very easily. But it has completely baffled me. I'm in training so forgive the ignorance.
Doing a bit of dead testing on a lighting circuit downstairs. Came across this at a light fitting.
Appears that the colours...
I own two flats with a small common lobby. Although operable from both flats, the common lobby light appears to be wired to flat A's circuit. Rather than fit a landlord's common area meter and circuit, I am thinking of having flat B's lobby switch professionally disconnected from A's circuit...
I need your help please once again in tracing a fault. Am DIY but not clueless. Converting former kitchen into 2 rooms: bathroom and laundry. The room had 24 cheapo ceiling spots, originally tungsten then 240v GU10 LEDs that I am replacing. Circuit spilt into two halves with two gang wall...
Customer asking for lighting for range/hob as it is really gloomy at night.
Issues being getting power there, and the curved profile which is more pronounced than the picture looks.
I'm interested how others would approach this one.
My current (only!) idea is D-Line min-trunking over tiles...
Good Afternoon All
Currently doing an EICR on common parts of a big site with multiple blocks.
All blocks have outside garden spike lighting in flower beds. These have been run on edge of bed in NYYJ clipped direct above the soil. There they have terminated into WISKA boxes but then run off in...
Hi Guys
I've fitted a few emergency lighting circuits to both domestic and commercial installs before, I've come across one I can't get my head round, this is going to be in a small supermarket one of these locals etc the existing lighting in the retail area is installed with three banks of...
When a 20W LED spotlight of the same brand and design is added to a 5-meter single-wire track system, which already has four 30W LED spots connected to a Varilight 300W 2-Way LED Replacement Dimmer Module, the entire track system experiences dimming. Why does this happen?
As I've mainly done site work and moved into domestic recently, I'm a bit rusty on stuff like this, but if I'm adding a loft PIV unit to an existing lighting circuit via an unswitched fused spur, if the lighting circuit has no RCD protection am I allowed to install it?
Same question for if...
Hi
I'm in need of some advice. First of all i'm not an electrician but do have an understanding of electrics as i come from an electronics background. We have a couple of different electricians we normally use and were getting conflicting advice on this particular project.
We are opening an...
Hi folks, I have been out to quote for a soffit lighting job. I have done jobs like this many times but usually only installing lights in the top soffit and has always been easy enough to get cables into the loft. This customer would also like lights in her lower soffit. I have a few ideas on...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc