A builder has asked for a quote for rewiring a domestic property all very straight forward until he mentioned relocating the consumer unit to another part of the house with a run of 10m to the new location. TNC-S at orgin.
Looking at options to make this as painless as possible. Thoughts on the...
Hi all, was hoping one of you could help. I’m in the process of buying a house and a few things stood out which I don’t believe meet the regs.
Firstly their is an RCD which I believe is wired into the shower. Does this meet the current regs? I was on understanding the RCD would really need to...
Hi,
I've decided to install undercabinet led downlights at either side of the canopy that houses the cooker hood above my hob (picture shows this for reference) and the lights we've picked out are unfortunately 12v, as I couldn't find 240v ones with the specs we were looking for.
What's your...
Hi all,
I have been asked to fit an extractor fan to a bungalow, normally I chase out a box for the fan isolator and locate it above the bathroom door, is there a reason I cant locate it in the loft, im guessing due to accessibility or something, but just wanted to check?
Many thanks,
Martin
Replacing an old storage heater with a Dimplex Quantum Storage Heater, but the Dimplex is physically larger, placing it directly beside the power socket /switch that feeds it, the socket would be very close to the heaters SIDE panel but not covered or hidden. Is that acceptable or is there a...
Hi There!
Background info:
Domestic/agricultural premises.
TT 3 phase supply and main distribution board located inside stables (agricultural location).
Several solar systems, storage battery system + EV charger connected - (lots of DC current's being introduced)
Single phase submain from...
Hi, I've got a problem and hoping to get some advice.
There is an ongoing development on the back of my house.
The Developer built an electrical substation house literally 1m behind my fence - in a straight line with my windows. The total distance between the substation & my house is 14m...
Relocated dryer vent. Old work 4 prong dryer outlet no longer attached to drywall.
So I think I need to rewire dryer outlet to new work 4 prong receptacle.
Any suggestions as to the location?
I thought to attach a horizontal 2x4 under window and another horizontal 2x4 under the dryer vent...
I have recently been to a property and for love nor money couldnt find the consumer unit in the 1 bed flat. I eventually found out that it is in the cellar below the shop next door.
Now my question is about the location of said unit.
I have looked into it briefly and there doesn't seem to be...
I mentioned on another thread about using a computer and VGA monitor as a kind of Heath-Robinson TDR setup to find a break in a run of cable. Here's the promised demo.
The hacked VGA test cable has a pair of flying leads connected in parallel with the green channel coax:
Connected to the...
Hi all I’m a self builder here looking for some technical details.... I’m fitting a consumer board next to my garage door and need to know if there is a minimum distance that the board needs to be fitted to the wall in relation to door opening???
My client wants a wall fitted extractor fan for their bathroom. Normally i fit the isolator outside above the door but the client is against this. Is there any reason why it can not go above the fan at high level so zone 3.
I can not find anything saying you can not but i can not find anything...
Hi There
Trying to rectify a solar installation also containing a double socket in a horticultural location.
Current setup does not have any RCD protection.
Solar setup: 3 phase TNC-S supply - 3 x Solarlake 17000TL inverters - 50kW installation
The problem I am having is selecting the...
I am having to redo the installation side of the AM2s as I failed the conduit.
I was thinking about the banjo on the SWA, is it meant to go on the inside or outside of the enclosure that the gland fixes too. I asked the assessor and he said he cant tell me. Seemed to me they are looking for it...
Just having a bathroom fan installed. It's an intelligent unit that runs continuously but thought it best to have an isolator switch.
Have been told the isolator switch has to be outside the bathroom on the hall wall above the bathroom door.
We would prefer to have it in the hall cupboard...
Got a consumer unit which needs sticking on a sub main and moving due to current location meaning all the cables will need to go in the cavity and also it’s not most practical place presently.
Moving it inside but can’t decide on best place for it, either just inside by street door in a...
What are your thoughts on letting customers access a fuseboard?
I'm working for a company that rents out rooms by the hour for people to play musical instruments and they often trip the power. These are unmanned premises. I've been asked to place a fuseboard in the corridor with RCBOs for the...
Hey, gus,
Good evening,
10:02 pm now in CA, Introduce the time of your location, Time is a very interesting thing.
Also welcome to recommend interesting industrial forum.
Been asked to look at a job on a pontoon. Haven't been there yet but I know it is a power supply to boat. Given there will be RCD per 709 I am wondering about the cable. There is a max movement of 1m. Any ideas as to the particular cable? H07RN-F I was thinking.
I am looking to install a fused spur and double socket in a new place, but the new place is located on a wall which has the soil stack nicely boxed in.
The question being is this acceptable???
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc