machine

  1. HEXx99

    208 Voltage too low for machine

    I ran 208 v power to a rottler em69p cnc machine. it calls for 208/240 v 3 phase. 60amp rottler em69 installation manual everything is wired using 3 #6 hot and #8 ground to 6/4 SO cord drop to the machine . inside the machine again the wiring is 3 #6 and #8. I checked voltages and got 208-209v...
  2. V

    Bosch washing machine tripping fuse box

    Hello everyone. I've bought a second hand Bosch series 6 (2 years old, minimal use). The first washing went without any fault during the cycle, but after the cycle fully finished (10 seconds later), the machine tripped the fuse box. I've removed back and top lid to check if any wired connection...
  3. Rockingit

    P7600 label machine woes

    Anyone have any clues? Faithful Brother P7600 stopped working, won't turn on. Assumed that the rechargeable unit has had it (it's certainly old enough) so removed and put fresh AA's in. Still won't turn on - display lights up, sometimes does an 'all pixels' kind of thing but never actually...
  4. Lucien Nunes

    Stop the machine! I want to get off.

    We have this Swiss-made Dixi horizontal borer from 1957, very nice machine still with its original DC variable voltage drive. In those days there were no VFDs, variable speed machine drives all used DC motors or Schrage AC motors, with the best DC units capable of better performance than VFDs at...
  5. T

    Washing machine is tripping the house RCD

    Hi, Do you know why our washing machine is tripping the RCD?......it works for a bit, then the RCD trips......the other L-N breaker doesnt trip.
  6. vards9

    Washing machine and Tumble dryer in shower room - issue with electrical install

    Hi There, Homeowner here with no electrical knowledge, so go easy on me! We've had our garage converted, and coming to the end of the project. We've had a shower/utility room (2.7m x 1.5m) added as part of the conversion, within which is housed a stacked Tumble Dryer on top of a washing...
  7. W

    Buzzing and Static sound from my Arcade machine

    Hi all, Please take a look at the video. I recently have a arcade machine, but it is cause a buzzing/static sound. Can someone help me identify what is wrong with it?
  8. T

    How much power does a washing machine draw on spin?

    Hi, the below says a washing machine is 800W.... https://unboundsolar.com/solar-information/power-table ...is that the average power over the whole thing including spin? How much power does one typically draw during the spin phase?
  9. S

    Shocks from new washing machine. (Un earthed)

    Hi. Did a call out just this morning as customer was getting shocks from Kitchen sink. On arrival I could see the sink was earthed and had good continuity back to the main bond. The client told me that it was when he was using the washing machine underneath that he had the shock when he...
  10. D

    Confused about voltage on machine

    Sorry this question may sound silly, but I really don't know anything about electricity so I'm just asking to make sure. So, recently I bought a machine from the U.S via Amazon. In the instructions of the Amazon page, it said to plug the machine into a 110V socket, but our countries run on a...
  11. L

    UK why is the washing machine tripping

    Greetings All. FTP. the electric keeps tripping mid cycle - not every time and not related to any particular programme. we have recently replaced the washing machine and the problem still persists and is probably more frequent now. it is not one of the usual suspects of latch, element etc. am...
  12. P

    Why is my AEG washing machine tripping my fuse box?

    Hi. I have been having a problem with my AEG 7000 Series Washer Dryer (L7WEG851R) tripping my main fuse box over the last week. I am trying to diagnose what the issue may be. Here is what has happened so far. The machine is three years old, so it is now out of warranty. Last week I ran my...
  13. D

    C2 for extension lead on washing machine

    I let out a flat and had an EICR, carried out, to meet the new Private Rented Sector Regulations. The EICR has recorded a “C2” for an extension lead on a washing machine. The lead supplied with the washing machine is about 1 metre shorter than is convenient for fitting the drainage tube back...
  14. S

    Coffee machine wiring 3 phase on single phase circuit

    This coffee machine is three phase model number sm 105e It’s three phase with 3 brown cables one neutral and earth What is the cheapest way to wire it in? thanks
  15. justcurioustwo

    can this machine produce more energy than is needed to keep it running?

    I came up with an idea that could possibly produce more useful energy than is required to keep the system running & no it is not a perpetual motion machine. The output is electric and that is why I am introducing this idea here. SeaPower description Attached is a diagram that details a new...
  16. P

    Tire changing machine not reversing

    Hi guys, I'm having an issue with a tire machine I was called too. The machine won't reverse. I replaced the original switch with a new one. I can get it going forward but no reverse but I can wire it to make it drive forward on both switches. Is this me being stupid and no connecting back...
  17. S

    How can the electrical components of a coffee machine break?

    Our coffee machine stopped working and it’s an electrical issue because it will not turn on anymore. I am under the impression that these machine are built to handle a wet environment, but is it at all possible it could have received water damage and how? If not,what could have happened? I...
  18. F

    inverter to run a robinair recycling machine 34134z

    Hello, I have a refrigerant recycling machine in my work van and don't want to run an extension cord from a customers house to the machine in my van, what size inverter do I need to run the recycling machine safely?
  19. N

    WASHING MACHINE REPAIR ADVICE PLEASE

    Hi. A little before Christmas, our (13 month old) washing machine packed in. We did a bit of investigating locally and found an engineer with good feedback. He came out and assessed the machine, and decided that the problem was the motor, and that we’d need a new one. His prices seemed...
  20. R

    Washing Machine Motor Tacho Testing

    Hello all Just looking at a Samsung EcoBubble washing machine that's fairly new and been an issue for some time apparently. It's in the sister-in-law's garage. She says she's had the Samsung guy out to it 3 times under warranty and it still doesn't work. She has no idea what was done to it...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top