master | Page 4

master

Recent contents View information Top users
  1. R

    Telephone slave extension help needed

    Hi all. I'm currently trying to add a socket in an upstairs room from the master socket. At the master socket there is a 4 core cable where Orange goes to A and White goes to B and green and orange are cut back. At the slave there are 6 junctions with a 4 core cable with orange, white, blue and...
  2. Rockingit

    BT Master sockets

    I've just looked at a place where as part of other work, it makes sense to move the phone sockets around. My question is: The master socket is being fed directly from the street pole, no other JB in the circuit. Can I interrupt that cable, divert it elsewhere by extending it, then from off of...
  3. Strima

    NIC Certificate Software Problem - Master Password.

    Just got NIC certification software loaded onto my works laptop. The previous bloke who had this laptop also had the NIC software installed and had set all his own passwords. He has left the company and is uncontactable at the minute, probably on holiday with a lot of other electricians...
  4. S

    Varilight remote dimmer

    Hi, I recently fitted 2 varilight dimmers with optional remote controls. I've been back 4 times to look at one of the switches. Ive replaced it twice. It worked when I fitted it but the next day I received a phone call saying its stopped working. I went back out to change it but I tried...
  5. K

    Range master cooker fault

    hi I have a rangemaster 900 induction cooker, which has lost all power half way through cooking, the trip switch has not tripped, but i cannot get the cooker to turn on, no clock or nothing, any help appreciated,
  6. S

    Help please re home network wiring.

    Hello I'm new to the site and if possible can anyone please help, although I realize that it's not an electrical question. I have installed Cat 5 e cable to socket outlets in living and bedrooms. I have taken all the cables to one point where I plan to plug into a router which will be connected...
  7. K

    Telephone Points for a flat in a block of apartments

    Hi everyone! I've had a browse on the net and on this forum but can't find any information on the photo attached Young ladys flat in a block of apartments, this is the only telephone point that's wired up and it works perfectly with telephone and router plugged in. Problem is, I've never...
  8. T

    Has anyone used Master Bender conduit bending app for iPhone?

    I saw this online and the math used is much more precise than the cosecant method for bending conduit. Has anyone used it? I saw this reference article on precision; http://www.electrician2.com/electa1/offset.html might be too much math for electricians??
  9. Rockingit

    Just picked up this little gem via facebook:

    the master trips out when the power goes out, won't go back on until power is back on, but have to turn off every fuse on board to get Master to reset when power returns, and then reset each fuse individually... huzb also a sparks - fuse board safe, just ancient. Own up then.
  10. S

    Salon master power supply

    I am to install x 2 13a dp fcu for a salon master water heating system. Do they need to be on seperate mcbs or is it ok to be on same ring. Do they need to be on RCCB side of board or would this cause nuisance trip problems.
  11. P

    Regulations master needed!!

    Long story short, I want to know if having click cieling roses above a plastered cieling with each one feeding say 4 lights and boards above that can be lifted but its a hassle. Is it against regulations, if so could you please quote the regulation. Thank you in advance. P.s i would trawl...
  12. B

    merlin gerin master pack

    got 20 acb merlin gerin master packs from 600a to 1200, i'm new to site and not worked with these before. how would you maintain one of these, i'm also aware of a weak spring on one of them that has tripped a few times. we are getting contractors in to see about replacing one of them...
  13. stidge

    Phones ?

    hi all, sorry youve probably been asked a thousand times. I have wired 1 x master feeding 4 slave phone sockets. Total run approx 30 metres.have got signal at master and no 1. have had them all working individually but were not all connected to plate(just twisted pairs). Have been told too many...
  14. O

    master documents

    HI, Got my mcs assessment in a couple of weeks and would appreciate it someone could give me a list of what is expected in a master document list. i have an idea, but anyone else's input would be great. thx ml
  15. D

    security lighting

    Can anyone recommend a make of security floodlight which are reliable and dont play up as the cheap one's ive been using are poor the pir's dont work properly. And do you just take a permanent live to your fittings or do you take a switch live perm and neutral? can anyone help cheers
  16. C

    master and slave

    any one had much experiance with using master and slave dimmers to switch and dim the same light from both switches. are the just wired the normal way with 3core? i belive varilight do them
  17. N

    Telephone wiring

    Every electrician has a gripe well thi is mine telephone ,a nice simple,thing wiring is easy ,but i cant get the dam things to work properly , doing extensions wire in parallel connect up nice dial to ring out great but what i am finding is when this happens the broad band cuts out hang up the...
  18. sythai

    Phone points help please...

    Hi chaps... Sorry basic stuff but been a long while since I've had to do much phone wiring. I am right in thinking I can wire all my extension points back to the master socket ? Or do I have to daisy chain of each extension to the next ? I'm sure both methods work but first one would be...
  19. C

    Which Multi Master???

    Has anyone used both the Fein and Bosch Multi Master and if so which one is the better tool. I use the Bosch one as it only cost just over £65 but would be interested to hear if people think the Fein one is £140 ish better.
  20. P

    **CHARITY AUCTION** Master lock lock off device

    another generous donation this time by the electrical safety council I think we all know how important it is to lock off when working not only for ourselves but also the customers. these are great kits and I would alos like to thank Clare Fleming for arranging this for us. get bidding and stay...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top