module | Page 2

module

Recent contents View information Top users
  1. J

    Hi there, Fisher and Paykel dishwasher Dw60FC6X1, has a blown resistor on the control module. Can’t recognise the bands!

    Blown resistor, how do I work out what it was to replace it?
  2. M

    2 module enclosure

    I am not sure if this is acceptable? If I am using a 2 module enclosure for 2 MCBs both fed from a MCB in the main consumer unit. Would I have to use a busbar inside the 2 module enclosure or would it be ok to have a cable link at the bottom of the MCBs. I have heard people say this is a nono...
  3. T

    Mk led dimmer module

    Hi All, I need to replace an Mk led dimmer module. As they are quite expensive , my question is , is there a cheaper alternative that i can use that fits the mk grid and knob? Thanks
  4. C

    Connecting a Brake Light Module to control all 3 brake lights

    Hello, I need detailed assistance badly. I am trying to connect a Brake Light Module or a "Flasher" to my brake lights for attention but I want to control all 3 lights when brake is applied, rather than just the 3rd brake light or the main brake lights. The instruction for the product looks...
  5. G

    Can anyone help with wiring a wifi relay module?

    I've got this wifi module that is supposed to be able to be used on a 2 way lighting circuit. I temporarily rigged it up to a mains plug with a 2 way switch and a 1 way as if it were on the stairs.A works well.then when i put it in situ it doesn't work I have a live and neutral to the switch...
  6. J

    How does one HALF CUT solar module affect the other modules in the string when it is partially shaded?

    Hello everyone, I have a fairly technical question. I wonder what will happen to the efficiency of the PV system when we shade the bottom of one solar module (HCC) connected in series? Will the performance of the entire string decrease by half because only the top works in this module? Isn't it...
  7. S

    Replacing 2 gang light switch - has 1 Intermediate module

    Hello - thanks for opening my post :-) I'm asking for help with finding what and where to buy a replacement light switch / or just the module This light switch controls 2 hallway lights downstairs and 1 light on the upstairs landing. The problem currently is that the 2 light downstairs are not...
  8. B

    Where can I buy a bolometer camera module 3-14um?

    Bolometers usually work from 8-14um wavelength. I am looking for an infrared camera from 3-14um wavelength.
  9. C

    Wiring of AC power entry module

    Hello, I am building a panel for an instrument. Its power entry module fits a standard computer cable (bottom of the drawing below) and features an on/off switch. At its back, there are 4 connectors, numbered 1 to 4 below. How should they be wired? Many thanks for any advice.
  10. A

    New Single Module AFDD from Wylex is Launched

    Just saw this I know loads of people say they do not work etc etc but it is good to see a single module. I think i am going to get one and try it out
  11. G

    UK HDMI terminal type grid/euro module?

    Hi, I'm installing grid module/euro faceplates in my property from the Click Deco range. One of the components I want to put in a 4 module double faceplate is an HDMI port. I've looked at the Click Deco range and the internal connector is the same as the external faceplate - HDMI. I need the...
  12. N

    Replacing a Legrand grid switch

    I have a bank of DP Legrand grid switches and one has become faulty. Is it easy to replace? Thanks.
  13. S

    10 way MK insulated CU 16 module - anyone replacing one or have spare cover?

    Hi all, I'm looking for 1x cover + lid and 1x just lid. Does anyone have them spare or a CU change planned soon? I'll cover P&P and name your drink £?
  14. C

    LTC Addressable Interface Module to be connected to the ballasts

    What is unswitched live and switched live in the attached image?. It it the drawing of the addressable interface module (AIM) to be connected to the ballasts. To where should I connect these USL & SL terminals? What is the purpose of these terminals?
  15. Aaronj46

    Name the brand of grid module.....

    Had a call to say the hob socket isn't powering up and the customer has said a lamp wont work in the socket and as the fridge works I'm going to punt at buying a grid switch before I go, if only I knew the brand? I thought mem spectra but they are straight ant etching is different on the ones...
  16. phxl

    Single Module Double Pole RCBO over 40 amps?

    With for example the Wylex NXHL1B Single Module DP range of RCBO's there is (at last) a sensible solution to RCD protection for all circuits individually, but only up to 40 amps. Is there a manufacturer doing 50 amp single module double pole rcbo's e.g for thirsty 10 kw or 11 kw large cookers...
  17. 1Justin

    Best value fused switch plus 2 module type 2 SPD?

    Has anyone done this yet on a budget? I'm pricing a job to run a submain off a TN-S. I'll need a fused switch incorporating SPD alongside in the same enclosure. Price sensitive. Thinking of a budget Lewden off the shelf fused switch (in 4 module enclosure), ditching the enclosure and buying 6...
  18. ferg

    Hager dimmer module swap

    Does anyone know if I can swap out the module on a Hager rotary dimmer switch for a different module i.e the aurora dimming module? I'm looking for a hager solution for dimming Enlite E8's Thanks in advance
  19. L

    Emergency lighting fault

    Hi All, New to the forum and was seeking some advice. I have arrived at a site to complete yearly 3 hour emgencey lighting test. Once completed I switched the power back on and half the emergency lamps haven't turned back on. When you turn the power off, the lamp lights up in emergency mode...
  20. T

    Ever tried using Eterna emergency pack module ? Don't if you can avoid it

    A more unholy jumble of wires and system of in-line emergency pack I have yet to see. Very dissapointed with the product. But it does work I suppose. Initially I thought wtf is this? but pause for thought and it all became clear but very inelegant solution. And the LED is supposed to be placed...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top