mounting | Page 4

mounting

Recent contents View information Top users
  1. R

    Wall mounting pv panels

    Any ideas anyone, viewed a job today and the guy wants 8 panels fixed horizontally on the south facing wall of his house, we use a standard schletter system, should i try and fit at a slight incline or fit at 90'.
  2. J

    Cheap mounting systems

    I'm looking at reducing my material costs , can anyone reccomend a cheap mounting system for a standard pitched roof/concrete tile set up? I currently use renusol .
  3. S

    Consumer unit mounting

    I have read that the consumer unit needs to be mounted on non combustible material, what do you do in the case of a consumer unit replacement when the old one is fitted onto wood, chipboard, mdf etc that also has all the dno equipment fitted, on an older property, the original cu or fuses etc...
  4. The Solar King

    Mounting on Scottish Slate Roofs

    To do this well can be a little problematic or expensive to say the least. The construction of the vast majority of Scottish Roofs includes sarking or close boarding. A layer of planking (normally around 22mm thick) or other material is nailed over the top of the roof trusses making a solid...
  5. M

    Pile Driven Mounting System

    Does anybody have contact details of sub-contractors they wouold recommend that install the field pile driven mounting system. We are situated in the West Cornwall area?
  6. infinity

    flat roof mounting on domestic install

    I have been 'given' a job (friend of friend) to install 6 panels on a flat roof at their property, i have not installed any flat mounting systems as of yet so wondering if anyone can recommend a good kit manufacturer? Any advice appreciated.
  7. G

    mounting kit

    hi all, looking at changing mounting kit from TRIC, great system and easy to install but it just sits to far off the roof. looked at SEN Sol-50 system, its the dogs but im assuming to expensive. so looking at WASI system. Has anyone has experience with it looks quite easy and similar to TRIC...
  8. C

    Consumer unit mounting

    An electrician has fitted a new Consumer unit to replace my (very) old unit. He has mounted it on a 5/8" ply backboard and then screwed that to the plaster wall. Is that OK?
  9. S

    Mounting for steel sheet roof tiles

    We have a customer installing on Decra steel sheet roof. It is a corrugated steel sheet that is made to look like tiles. They are nailed to a wooden sub structure. Has anyone fitted onto this roof covering type before, and if so what type of fixing did you use to attach the rail? We have...
  10. G

    schletter mounting kit part deux

    *previously in this saga... We're in the process of changing from Schuco to Schletter mounting kit because our supplier convinced us it was just as good and would save us a fair amount of money* So we're now doing our first schletter installs, and I don't know if it's just a case of 'fearing...
  11. Energetic

    In Roof Mounting

    Anyone know of a flexible in roof system that would work for all panels? We've looked at a few over the last couple of years but never actually got round to doing one.
  12. F

    Inverter Mounting Solution Needed...

    We are in the middle of doing a commercial project, and have 5 Mastervolt TL Inverters that weigh about 60KG each. Ideally these should be wall mounted. However, as it goes in the construction business, our requirements have been ignored, and the space that was required for us has not been...
  13. G

    Schletter mounting kit... any opinions?

    We're thinking about moving across from Schuco to Schletter for our mounting kit, mostly for cost reasons, plus it does look to be pretty decent kit. If anyone uses / has used the kit, I'd appreciate any opinions of it good or bad relative to the schuco kit before we take the plunge. The final...
  14. S

    horizontal, non piercing mounting system

    I am looking at a project on a brand new build with a kingspan insulated roof overlaid with a rubber membrane. The client is looking for a 10kW installation on a roof with plant equipment and the architects didn't really give any thought to panel spacing to allow for an angled array. As a...
  15. S

    Flat roof portrait mounting systems - help please!!

    Anyone know of a decent priced mounting system for a flat roof (balast required) mounting system which will hold panels in portrait - I can only see landscape ones!
  16. M

    Flat roof mounting

    Any one recommend a decent flat roof mounting kit, one that doesn't need a huge amount of ballast. thanks.
  17. SolarCity

    Renusol Intersole on plain clay tiled roof

    Has anyone installed a Renusol Intersole system on a plain clay tiled roof? I can't see any reason why it shouldn't be ok, but it's just that every example I've ever seen of it shows it installed on thicker pan tiles. Presumably it would be ok but would sit a little higher than normal?
  18. X

    outbuilding planning

    I have a job to install a flat roof system to a garden outbuilding at the end of the customers garden, Does anyone know if I need planning pertmission ? my understanding is that if the panels are mounted greater than 1m from the roof perimeter I wont require it? If this is the case it would not...
  19. M

    Vertical mounting system - has anyone ever used or seen one please?

    Hi, has anyone ever used or come accross a mounting structure for modules to be fixed vertically on the side a wall? Only for 12 panels in 2 rows of 6 portrait on the side of a school. We normally use schuco for everything but they dont have one. (Just want to add "great forum", everyone who...
  20. D

    Black 250Wp Module required with narrow mounting points

    I actually had an enquiry! The roof's a little unusual though so i'm looking for a decent black framed mono 250W module that will allow mounting rails to be around 600mm apart without voiding warranty and with a good (5000Pa +) mechanical resistance. To save me trawling through any more specs...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top