Just been to see a job and the guy wants his consumer unit moved. It is curently in his kitchen and he changing that to a bathroom and building a new kitchen in the extension. The original wiring looks to a decent standard so i will be looking at extending the wiring from some sort of din rail...
Hi all,
I have looked to see if this has been answeres elsewhere but didn't come across anything obvious, my apologies if this may have been discussed before..
Basically we have a customer who has a 3.5kWp solar pv installation on his roof space under the 43.3p tariff (installed in feb '12)...
Ross37
Thread
another
installation
moving
property
solar
solar pv
seemed to have bagged another house extension happening in my street. way hey..
but he wants to move cu about 1m to a box on the new wall. but keep existing dno equipment where it sits
as its under 3 meters i can just install new tails.in a duct in the ground going up cavity of the wall.
rcd...
We have a commercial customer inquiry for a 10kW PV system and a Biomass boiler install. There is a possibility that their current facility will be closed down and a new building will be built 100 metres away. The customer is asking if they have the PV and Biomass installed now and then in a...
The Launderer
Thread
building
installation
installed
led
moving
ofgem
system
their
I have been asked to move everything except the panels, from in a garage to the same wall inside the house, no cables need extending, Now I want to make it clear I do not "do" PV however it is more an obligement for a old chap I know, and having looked at it there is no real issues however if...
Hi Guys,
Hope ye can give me some advice and help here.
Im a self employed sparks in Ireland and iv been out on my own for about 4years now but getting nowhere so i was thinking of moving to London in November but i need all the help i can get from ye as i dont know where to start.
I see ye...
peter_k800
Thread
electrician
electricians london
employed
grade
help
london
moving
self
self employed
sparks
thinking
unless
where
I have recently one a place on a local authority framework for PV installation which was based on domestic properties. The council now has come up with schemes for the schools and council depots ranging from 20 to 50 kw systems. I have completed about 150 domestic installs and understand the G83...
A friend of mine who has a shop has asked me to move his oversink water heater (I have no idea why either). He has moved his sink though but again not sure why.
The problem is he doesn't want any disruption to the walls etc, so am I ok to use a crimped connection, there is no room for a...
A friend of mine who has a shop has asked me to move his oversink water heater (I have no idea why either). He has moved his sink though but again not sure why.
The problem is he doesn't want any disruption to the walls etc, so am I ok to use a crimped connection, there is no room for a...
Ive got a slight problem, customer requires CU to be upgraded and moved about 8feet away from origonal position.
Im goin to put it next to incoming supply, only trouble ive got is all extended cables require jointing and are all going to be face fixed as i cant hide them, ie PVC trunking...
Hi
Basically, I've just finished the 1st fix on a property, customer and builder wanted CU to go into kitchen cupboard where the gas meter was. Gas meter has been disconnected, builder waiting on National Grid to come and re-site gas meter externally.
National Grid came out on Friday, customer...
Hi all. hope someone can point me in the right direction.doing a rewire for two flats above a shop which is straight forward enough. except the mains are being moved from the front of the shop to the rear. the dno want three switched fused isolaters installing at the rear and a 115mm red ducting...
Had a call regarding the movement of a CCU.
The consumer unit is currently located in the kitchen , high level.The main income located in a cupboard about 1m away.PME system , 16mm tails.
It is to be moved. approx 7m away ( under the stairs).
1-)Is there any way the customer can get the...
hello all!
new member here and looking for an answer to this question...
have to move a wieredly postioned cu in a small single room. It is about 400mm off the ground??? which i find a bit odd and never seen before. the room is being occupied by 1 year old and the client needs it moved asap...
Having completed electrical apprenticeship and gained an HNC in electrical engineering I would like to move into electrical design in the future
which courses would i need to complete to make the transition from electrician to electrical design engineer
I have some experience of AutoCAD etc
Hi all.
Been asked by a client to move their existing night storage heater UP by about 2ft so that she can put a cupboard underneath.
Wiring wise it's not a problem, but having never moved one before I just wondered if anyone had any pearls of wisdom for me?
I've heard they're pretty heavy and...
The General
Thread
advice
floor
heater
moving
newbie
night
off
storage
storage heater
Morning all, I have been asked to have a meter moved from the middle of the house to an outside wall, is it the DNO to contact for this? I have told her it will be pricey but she seems happy. Also any ideas what the average wait is for this? Thanks!!
Hello
...when someone moves, are they now legally or contractually obliged to leave lights ... as in you can't nip off with the light fittings and leave none, right?
....so....can anyone tell me, does this apply to wall lights, or could you leave them capped off.
I guess what I am asking is...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc