I woke up one morning to find no power in MBR and to the light just outside the door. The Hot Water heater went out the same day ( been leaking for months and didn't know it). I had the hot water heater replaced but still have no power. Hot water heater works. I've checked all the breakers none...
A friend has just called as his daughter in Belfast (many, many, many miles from me!) has just lost all power after water fell into the cooker/hob.
I straight away thought it has to be a main RCD somewhere, but I cannot see one in the pictures they have sent and they don't 'think' there is one...
Recently changed my starter relay on my xv1600 wildstar. When reattaching battery cable, it caught a small thermostat and sparked. Now whilst I have power to the relay from the battery I have nothing beyond the relay and turning the key does nothing. All fuses have been double and treble...
Dear All,
Hope you can help a little :-) Our tumble dryer (Hoover Dynamic Next 8kg) suddenly decided to have no power whatsoever (no lights, no anything). Checked the plug (fuse as well), socket, power supply and all seems fine so something seems amiss in the dryer itself. Checked the door...
Hello!
Our dryer stopped working after a power outage. I checked to outlet with a multimeter and it has no power to it. I checked the breaker and the power lines going into it have no power so it has no power. I replaced the breaker and there is still no power. Any idea what the problem could...
My 92' Firebird that I just acquired will not start. I bypassed VATS security
with resistors so the security light now shuts off. I replaced my positive
battery lead that was shot and the only thing that happens when I turn the
key is the temp gauge fluttering. The relay only has 0.5 constant...
I have a 5amp lighting circuit throughout my flat which should power a total of four 3-round pin outlets. The 5amp circuit also powers two smoke alarms (backed up by battery). It is my guess that the circuit also powers the lights under the cupboards in my kitchen.
MCB switch is on. Cycling the...
Our toilet extractor has, or so I thought, been failing (delayed startup, bit intermittent) for some time, and yesterday it finally stopped working. Vent-Axia Silhouette 100T.
It's going to be a bit of a pain to replace, so I though I would check the connections first just in case. Imagine my...
Evening Guys,
A little bit of advice if that's ok,
We have a Creda Advantage 550C model shower was working fine earlier today, gone to use it this evening and its just not working. there is power to the breaker (pull cord) but when i press the buttons they click but nothing?? I know its not...
Morning all.
I have just been to a house where there is no power to the 13A FCU feeding the immersion.
I believe I have found the corresponding MCB in the CU although it is difficult to be sure as there is only continuity on the CPC, it is labelled water heater. There is no continuity from...
Yesterday, I replaced a light switch (as I've done several times before). When I turned the breaker panel back on, the light was working - but now the other lights connected to that same breaker panel do not work. I re-checked all connections and reset the GFI (the outlet works) but no luck with...
video explaining/showing problem
View: https://youtu.be/VjtsPzzZYrQ
this is a eaton cutler hammer circuit breaker. The house was built in 1969 but the breaker was upgraded to this eaton 9 years ago when i bought it.
House uses mostly older outlets that are 2 prong, not 3 prong. HOuse does...
I installed a motion sensor switch in our laundry room. It works.
But, now the lights in the next room won't work, and a couple power outlets down the hall don't have power.
Posting a photo of the box. Please let me know what other useful info I can provide?
Thanks in advance.
I was working on a lighting circuit connected to a 3 phase board. The board has a single RCD effectively acting as the main switch. After tripping the RCD by cutting a wire (the old circuit isolated via MCB but Neutral still connected reason), I found that the power to the board didn't come back...
Hi everyone,
Firstly thank you to all on this forum who helped me to track down the problem with the plug sockets not working in 1 room of my flat - i came across this website and the comments helped me immensely!
I have registered and joined this group so i can share my experience and...
Hyundai i10 (2011)
Hi
PROBLEM
I had a problem a few months back, where I couldn't start the car. I used my spare key & fob and all was well again. This morning the spare set wouldn't open the doors, although a light was emitting on the fob. I changed the batteries in the 2 fobs, but still no...
Hi Peepz
I got a Dyson DC21 Motorhead. Today the suction stopped working, however the motorhead still works, the brushes spin. If I remove the motorhead & try the switch then its like no power. There must be power coming through as the motorhead works. What can it be & is it common? is it...
I have a customer with a bg smart meter. The meter has £16 credit but no power coming out of meter to consumer unit. Anyone had issues like this? Trying to get to speak to a bg advisor is a nightmare. Help please :)
My Fridge Freezer power was lost so I first changed the fuse, then I tried plugging it into another circuit which worked.
I bought a new electrical socket, but still no power from that socket?
Any ideas?
There's been no tripping of RCD or any other electrical issues.
So last night I went to put my heater on in my room, it’s one of those oil filled ones that you plug in. So went to turn on my light and no power. So checked everywhere else in the house and all working. Checked the fuse board and nothing has tripped.
So checked the plug on the heater and it’s...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc