I have a quad switch wall plate like shown here: https://www.amazon.com/Franklin-Brass-W35251-PW-C-Classic-Architecture/dp/B01HMCXLK4/ref=sr_1_6?keywords=4+wall+switch&qid=1673488598&sr=8-6
The second switch, which controls the overhead foyer light, appears to have stopped working. The light...
One of my switched ceiling lights or the wall switches (three-way switches at separate entrances to the room) is not working properly. The light will work with some switch positions. With switch A in one position, switch B works properly. When switch A is in the other position, switch B will not...
Hello and good evening
I have been asked to take a look at a Sunhouse sshe125 storage heater.
The heater’s fan is not working and Dimplex have suggested the fan needs replacing.
This afternoon I bench tested the fan motor and it operates, so I am now scratching my head.
The unit heats up...
https://www.mlaccessories.co.uk/product/3303422/230v-gu10-led-emergency-pack
has anyone used these before and if so do they have a compatible bulb I have only found one OSRAM bulb that seem to work with this fitting when it is switched on to its emergency battery
any one any idea is Is it to...
I have a security light [this one] and have wired it into the lighting circuit in my workshop; the lights in the workshop are all LED panels.
Wired that way the light doesnt work when triggered at night by walking past it.
If I disconnect it from that circuit and attach a 3-pin plug to it and...
I have had no issues until this week. The lighting in my basement all has gone out. This includes my laundry room, basement game room, and the bathroom. I thought that it was just a blown fuse but no fuses were tripped. I checked switches and bulbs and ruled those out. I still have power in...
DIY at my friends house, his pull cord stopped working for bathroom light, so i went over and the wires that are coming out the roof was 3 wires and thats neutral, live and earth. got a new pullcord panel, put the earth in the box terminal, neutral into com and live into L1. turned the breaker...
Ikea HOO M10s extractor hood. Lights flash on then stay dimmed.
Video of lights turning on here - New video by Matthew Arnold - https://photos.app.goo.gl/2sNSTP2Cq5PrWMcq6 (also attached)
The bulbs are brand new LED bulbs. I replaced the Cooker Hood Light Lamp Switch (suggested by builder)...
Hi There,
wondering if anyone can help/assist in my problem, we bought a house 1 year ago, and i believe the house is 5-10 years old, quite a modern house, problem is all upstairs phone sockets do not work, no dial tone, router wont work in them, i have taken some pictures in hope someone might...
I'm in the process of renovating my hallway and the downstairs has a single light controlled by 4 switches. I've been replacing each switch and testing after each one, however one of them I have changed and now it does not work to turn the light on or off. Other switches still work. All wires...
Hi all,
Yesterday I returned home to no hot water after a few days away.
After a brief inspection it seems the fault lies with the Horstmann Electronic 7 Water Heater.
The display is still visible but the controller is completely unresponsive. If I select either of the following buttons...
Hi, I have 2 hallway lights that switch on together (used to before I got my hands on them). I am trying to install 2 spot lights. I have added pics of my wiring, which does not work. Pic1 light switches on but wont switch off, Pic2 light wont switch on. Some wires have coloured tape so I have...
I've recently moved into rented property and I currently have no lighting in the bathroom (2 wall lamps and 3 ceiling lamps).
The landlord believed it to be an intermittent issue and said they'd get an electrician in to replace the 2 way cord switch. I said I'd replaced my own in the past and...
Hi all,
I have a Malibu 120W Light timer for low voltage outdoor lights. When I manually set to ON, the lights go on, so I know the lights are wired correctly. But the timer is set to run off the photocell: lights on at dusk, and off 4 hours after dark. However the lights do not turn on at...
Hi,
My Wahl Home Pro corded hair clipper has stopped working......3A fuse is still good. No sound, no movement , no nothing.......i took the blade off and cleaned some hair out but still no good.
I cant take the back off as the screw is a "triangle head" one......like a Tork but its triangle.
I...
A single switched 13 amp socket that my extractor fan is plugged into has stopped working after 10 years. The fan itself works when plugged into another socket. Today I replaced the switched socket like-for-like, but the outlet still does not provide power to anything plugged into it.
As far...
My 2003 Toyota Echo has two back lights in the instrument cluster. One of the lights would flicker if I hit a bump or something. I swapped the lights, meaning I put the bad light in the good light's place and vice versa, to help determine if it was an issue with the bulb or something else. The...
Tried fitting a magnetic lock on a job for a bathroom. Client has had problems with people doing drugs in his bathroom so wanted to control entry from his shop tills so the lock is fitted and works but I need it to be sorta timed as when releasing, the button locks the door( staff can't use the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc