Hi all, I’ve purchased a Ring Spotlight camera and decided to remove the old spotlight that’s currently installed on the house we recently purchased. After taking down the old spotlight, I found four wires: black, brown, unsheathed earth, and grey. However, the Ring only has the usual three...
Hello,
I had an electrician install GFCI receptacles (as per their recommendation) due to my homes older electrical wiring.
I also have asbestos in my walls so I want to avoid ripping existing boxes out and replacing the 2 with larger ones.
I drywalled over the existing wall in my sons...
I have an old 1959 house that appears to have outside service panel feeding 2 subpanels in the house each with only 3 wire feed. One subpanel(A) is in laundryroom supplying that side of house including kitchen, livingroom and half of den. The other subpanel(B) feeds 3 bedrooms, hallway and 2...
Recently moved to an Altbau building, which is a German term for an old house. And picked up this light fixture from someone on ebay (Picture 2) which has to be connected to the following electric box (picture 1)
Written description of what is going on in those pictures
1) The building is...
Long week, lots of health-related issues have me a bit distracted, and this bathroom rework project has got me completely stumped. I'm an experienced DIYer, but am a DC and logic circuit person by training, and this AC stuff has thrown me off this time. I caught myself literally scratching my...
New here so thanks in advance for the help. I'm an architect (definitely not an electrician) struggling through what I thought would be a fairly straightforward replacement of two ON/OFF switches in my 1960s home. One of the switches controls an exterior flood light and I would like to replace...
I've done basic wiring, not a pro by any means. But I know enough to not electrocute myself, which is why I'm not touching this until I understand it. Pic below.
I want to replace that old black cable going from this box to an outlet over my workbench. It's the two wire, no ground type...
Hopefully in Video and Pics I explain it better than here! I have a dilemma in my old house that I thought was a Simple Switch Loop but I have two hot wires in the ceiling receptacle and one hot in hallway light box!
Here is my YouTube video, I have had a couple strokes and three heart attacks...
Hello all,
Just some advice...
I am fitting insulating boards on an external wall in a bedroom (50mm thick with plasterboard) as the end terrace wall is solid brick with no cavity...
I am wanting to spur off an existing single socket in a bedroom (two cables going to it) to an additional double...
I’m a junior electrician, fresh out of college. I did some minor electrical work for a friend buI tried to put up a new chandelier I came across:
Two Line wires (RED), going into one connector block
Two Neutrals (BLACK), separated into different connector blocks
- Two CPC wires, going into...
i am doing some work on a fairly old house, the current cu is in a cupboard about 500mm above the ground. what are the thoughts on changing the height? can i leave it at the same height as it complied at the time of installation or does this not apply?
thanks for any guidance
Hi
I'm buying a new kiln and wonder which is best on a 60 amp supply in an old house. I have a choice of 7 kw or 9 kw. Will the 9 kw Trip if I run the shower at the same time? Have been advised to install a 50w breaker for the 9 kw.
I've just moved into a new house, It's a 4 year home built by a major developer. The previous couple who lived here were non-diy savvy and from speaking to them on numerous occasions the only work done on the house was decorating and flooring which they got people in to do.
Now, the house has...
Hello everyone. I have a recurring problem with using kettles in our house.
We have to buy new ones regularly (every few months) as after a while they start to trip our 40A 30 mA circuit breaker. The kettle trips the switch as soon as the kettle is sat on its base (without being turned on)...
Hey guys,
First time posting, I have a question/problem.
I've just moved into a house and some of the light switches are a little on the wobbly side so I bought some new ones to replace the not-so-white any more ones. My concern is the double light switches and how they are wired up.
In the...
Hi
I am thinking of purchasing a compressor which requires 40A supply. I have a normal socket in garage which I believe won't be able to handle 40A. My question is would the existing wiring be able to handle 40A? Can I just simply remove the socket and install a circuit breaker maybe followed...
I have an old house and have refitted the bathroom and I'm just curious am I living in a house from hell or do I just not understand/know enough about electrics in bathroom. No doubt this will open a can of worms and I'll look forward to some of the humorous responses - I think some of you...
Hi,
I wanted to query the requirements of fitting an extractor fan within a bathroom / utility room / kitchen whilst undertaking a re-wire / renovation.
I am currently re-wiring a house (circa 1900), but the owners do not want to have an extractor fan installed into the bathroom / utility room...
Need to find out where someone routed cables in 1970's extension so I can part the light circuit from the ring!!!
Any ideas what tools are best to trace the cables?
The extension is a flat roof that 3 months ago was replaced, typical!
Have been looking at fuse finders, tone generators, multi...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc