Doing a rewire at the moment in an empty house. I am using RCBO's mostly so when i got 1 room complete i wired the 4mm radial into the RCBO so we could get the kettle going.
After several brews i went to disconnect it only to find i had wired it into a 6 Amp RCBO!
The trip never operated once...
hello
have a query re the above, as i came accros one for the first time yesterday. i am aware that these devices are now obsolete and should be replaced. Now many people advise to remove and replace with a modern RCD to current standards. if you do replace with a new RCD, basically covering...
An old fuse board with only 4 fuses 1 5amp, 1 15amp and 2 30amp fuses has a VOEL CB as the ADS for the whole board. I was adding to an outside circuit, one more light, using SWA cable and whisker boxes for a junction.
When I came to testing, I was not sure how to test VOL CB. I have a Metrel...
I'm from Holland and the idea my electrical installation wasn't safe never crossed my mind. I live in Thailand now and things are a bit different here, something I first noticed when my first pc was fried. It was then I had the sockets replaced and ground and put a surge protection unit in...
Advice needed please, I was called out last week to a nuiscance tripping problem with an old elcb, IR tests showed up a L-E fault on ring circuit, finaly traced the fault to a wall light run off ring circuit which was shorting out in the socket. I disconnected this, put everything back together...
Had to install an 80A 30ma RCD today to replace a Voltage operated trip. Customer wasn't interested in a new consumer unit. Had a fair bit of difficulty terminating the 25mm tails using the unsuitable enclosure I bought to house the RCD. Any advice on the best one to use for when an RCD is...
Hey, just a quick question from a numb moment i had a few day ago, i came to connect a 2-way lghting circuit which was operated by 2 3cores and used a neautral. i dident wire this lighting circuit, and have never come across it before, can anyone explain how this would have worked?
Also, when...
Can anyone give a simple definition of on load and off load switching? Examples of each would be great, Am i right in thinking an emergency stop is a on load and a isolater a off load.
Thanks in advance.
I am wondering if anyone can name me a manufacturer that makes floodlights that work via a remote control and/or a remote PIR with a battery in it. I know they exist because I have come across such a system a while ago however I cannot remember the name.:confused:
The system I came across had...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc