DIYer question
I need to add an FCU to the kitchen ring for a boiler and also an outdoor socket.
I don’t want to extend the ring to the outside socket in case of water getting in.
Can I put the FCU for the boiler on the ring and does a 3amp fuse in that have any effect on the overall ring...
Hi, i live in a new build house where they builders have left a junction box on the outside of my house. In the junction box there is a 6mm twin and eath cable and what looks like a Cat5 cable. The twin and earth is currently in connector blocks. This cable runs from the junction box straight to...
Ok i may get slated for this one but here goes; A bit of background info first.
Its been a while since ive looked at my iee regs, and ive not done my 18th edition but get the updates. i no longer practice much electrical due to a career change.
But for friends, family old customers when i get...
Hi, recently moved. We have an outside socket that doesn’t work, I checked the wire connections,. Just want to know if this looks correct, the live connected is the white wire, the 2 red connected to each other are also live.
I will get an electrician to replace the socket but wondered if the...
"Class 2" Spur off kitchen ring to IP 56 locked S/O. on outside wall of garden flat. Customer unhappy with unsatisfactory EICR. "It's always locked and I only use it to charge my laptop when I'm sitting at the garden table". I pointed out that it was wrong and I can't let it go, things change...
just a quick question can I power my outside light from the inside lights direct or do I need to take the feed from the inside to a switched fcu then to the outside. Same question for a outside socket also thanks
Hi All
Recently came across an interesting situation whereby a client wanted some extra sockets and lights in the garden. The current lights are fed from a spur run in 2.5mm SWA and buried for approx 3m across a lawn to existing installation of two single sockets and some floods in the borders...
Hi all ,
I understand that you can’t spur of off a spur , ideally adding sockets would best be done by splitting the ring and completing it. Currently have an outside socket on the back of the house which won’t be used at all but we have a decking area further up the garden which I want to add 2...
I have installed outside socket by spuring of a socket from inside the house..(straight off the back of it. No distance). I am now wanting to put an outside socket at the bottom of the garden roughly 20 metres away for a hot tub or speakers etc..... I have bought 6mm 3 core armoured cable...
Hi,
I'm located in the UK and replacing my outside double socket plugs with ener-j smart wifi sockets. I've wired it as the picture below, exactly the same as the old one. I used my tester and it's only earthing one plug. There's another earth socket but I didn't need an earth wire in each one...
Hello all ,
In the garden there is 1.5 3 core armoured cable running from the exterior wall to an outside socket , the power is from a socket inside the house (on the interior of the same wall) I know the sockets are wired in 2.5 but why is the armoured 1.5 ? Thanks
Hi People on an install I have come across a British General outside socket that is reducing the Insulation Resistance when i remove the outside socket the IR goes back up has any one come across this before
Thanks phil
Hi
I have a switch by my front door inside the house that switches on and off an outside light.
the front of the house has a lower roof that goes up and after windows joins the top roof.
therefore, I have an eves? That is about a foot above the top of the front door.
looking to place some Xmas...
Hi all,
I have a job booked to fit outside socket which will be used to power portable hot tub. The socket will be waterproof fed from existing circuit via fused spur which I also going to fit. RCD protected at the fuse board (hot tub has got its own RCD device rated at 10mA)
The question I...
Hi folks,
We are looking at a new property and noticed there was an outside Socket, which is great.
However, the cable that powers it has a 3-pin plug on the end and is plugged into a socket in the living room. (See pics). To turn the outside Socket on, you need to turn the socket in the...
This may be a daft question, but I have been asked to install an outside socket on a static caravan.
As is the norm on a holiday park, the supply is via a 16A 30mA RCBO installed with a meter in a weatherproof enclosure and feeds the van via 2.5mm flex on a 16A 3 pin plug.
Usually the norm would...
Hi I’m new to this forum, hope I can get some good advice.
I want to install 2 outside lights on a wall. They will be the highest IP rated I can get. I was going to use 3 core armoured cable or conduit to run the cable to an RCD protected outside socket on a plug. My question is this, because...
Hi,
I am installing an outside socket but had a question about how I can connect it to the internal supply. I have tried to represent my options/plan in the attached image. Are there issues with either of these approaches?
Additionally, does this work need to be approved/signed off in anyway...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc