pendant | Page 4

pendant

Recent contents View information Top users
  1. N

    Pendant tripping MCB

    Hi all, Have a lighting pendant switched by a pull cord in a downstairs toilet. Apparently 50% of the time it will trip the circuit. Could this be a faulty switch or even lamp? The switch and pendant are only couple months old (cheap ones tho) Thanks
  2. B

    no cpc to pendant

    Hi all Just a quick 1 I'm doing an eicr and basically I've come across 2 pendant fittings with a 2 core flex going to them and no CPC problem is that ceiling has been over boarded with timber panels there's an earth at every other fitting, what code would this warrant.
  3. C

    Small diameter ceiling pendant for exposed beams?

    Hi guys, Im looking for a standard white 6 inch pendant with as narrow a diameter as possible to avoid the overlap on a property with exposed beams. Doesn't have to be 3 plate as i'm wiring at switch. Any ideas which are smallest and where to buy would be greatly appreciated.
  4. Amp David

    Inspect and test on lighting circuits

    When testing lighting circuits that contains multiple fittings connected to the circuit via plug in roses, are the readings for either R1R2 or R2 taken at the plug in rose or the fitting? This question is aimed more at doing a periodic rather than at the initial verification stage. Personally...
  5. M

    60V on light (pendant) with light switch off.

    Have been called to a recently installed installation. Customer noticed one of the GLS BC LED lamps was glowing when turned off. Here are the facts: Circuit tested - all tests appear normal. Wired with feeds at the switch. All lamps are LED Measured voltage when lights switched on is...
  6. B

    Halogen lamps in pendant drops - Compliance with BRAD L1B ?

    I saw GE Halogen lamps in use on a social housing block being refurbed - whilst they are still allowed to be sold, i don't think you can say it complies with Building Regulations as they are C rated and so hardly energy saving - 1200 lumen for 70 W is pretty poor.( <18 l/w energy efficient is...
  7. S

    Standard ceiling light pendant - Double Insulated?

    Recently had my inaugural NICEIC Domestic Installer Assessment. My assessor pointed out to me that my Schedule of Inspections was slightly inaccurate in that I had marked "double insulation" as "N/A". He pointed out to me that standard ceiling pendants had no CPC and as such were class 2...
  8. A

    pendant in bathroom

    Hi all doing a job in a house and the client wants me to put a pendant in the bathroom, now the ceilings are quite high (2550) and i have some short 6" pendants so well outside of the zones. Do you think i should push the customer for a proper bathroom fitting or even use a batten holder. Thanks
  9. B

    Class II outside pendant.

    Can anyone tell me where I can get hold of an outside pendant (coaching lantern style) in plastic or polycarbonate? I can find wall-mounted versions but the customer wants to replace his existing (metal) one without paying to run a cpc to it. Thanks.
  10. Amp David

    Antique ceiling rose and pendant

    Looked at a job today in an old house. Customer want to do away with the standard white rose and pendant and for something more in keeping with the house. I've seen old style switches advertised before but can't for the life of me remember. Anyone else fitted these before?
  11. a1guvner

    Pendant from doomsville

    Carried out a refurb on a posh house in Kensington, client calls to advise having an issue with some lights in a hallway, we attend to find a faulty dimmer module, rated upto 400w, single mod so no derating and mod suited for lamp type and 120w load, fit a replacement mod and starts having a...
  12. DaveyD

    Pendant side saddle

    Ok, thats not what its called. But can you help please guys. I have to mount three lights (to be purchased by customer) on the side of an rsj when its boxed in. Now normally I could mount under the rsj but on this occasion they will only be dot and dabing that on the bottom as they need to keep...
  13. P

    switch wire for pendant

    In Ireland we run a 1.5 mm brown and brown and cpc from the pendant to the switch as you are never allowed use the blue from a t&e, is this the case for the UK or do you still run brown and blue and mark the blue as a phase ??
  14. M

    TRS Pendant in shower room

    Just a quick question we got called in to repair a light fitting in a rented property which had been assessed by letting agency. On the scedule it said to replace bulb in bathroom light this we did as only allowed to do what mentioned on sheet at same time had to replace lampholder to TRS as old...
  15. O

    changing pendant to fitting

    guys, cables coming through tiny hole in ceiling into pendant. Replacing for fancy fitting with terminal block that wont accept anything. I still cant quite understand how to get a choc box into the ceiling void without creating a hole bigger than the fitting as it's base is no bigger than a...
  16. B

    can i install a pendant light in shower room?

    never install a pendant light in a shower room before, i always check the IP rating first, but for pendant light like this one does not have a IP, can i install it in zone 2 in a shower room? checked the on-site guide, there is 30ma RCD protection, really cannot see why i cannot put it in...
  17. D

    Converting pendant to downlights...

    Just wondering how everyone would go about doing this... I will be converting a kitchen shortly from a single pendant (loop in, loop out, switch) to downlights. I know there's a few different ways of doing it, junction box, connector blocks, wago box etc but I was wondering how everybody else...
  18. D

    bell cablee feeding pendant

    Hi all got to change a fuse board but the house has beel cable single cores twisted together feeding the pendant am i correct in changing these during the board change or can i leave them and make a note on the cert thanks
  19. L

    Pendant light only works with energy saving bulb

    Hi, I've just had a new ceiling pendant fitted with a dimmer switch. For some reason the light doesn't seem to work with a standard bulb (bayonet fitting) but when I put in a energy saving bulb it does light up (although flickering as its on a dimmer) so the pendant is obviously wired OK...
  20. the pict

    odd volts on pendant

    I did a PIR last week and in the utility cupboard a single pendant which was in the whole house light circuit showed, 112V L/N and 118V N/E I suspect water ingression but the rose cover was dry all other lights on this circuit were fine and Zs was within limits, with no other associated issues...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top