plant

  1. S

    Surface mount T&E through plant room ?

    Hello, I've been asked to run in a new circuit for a dishwasher in a school staff room. I've planned a 20amp / 2.5 T&E radial feeding a 13amp fused connection unit and fixed equipment connection point. The planned cable run includes running across the ceiling of the plant room (2/3...
    • scanner
    • Thread
    • mount plant room surface t&e through
    • Replies: 20
    • Forum: UK Electrical Forum
  2. P

    Increasing PV plant and getting old tariff

    Had a customer comment that he is thinking of upgrading to a MW (out of my league) and he has a national involved. Now he is being told that it is better to have a 200KW and a seperate 800KW. The 200KW gets added to the 50KW system he already had installed during the pre-DEC 2011 rush, and he...
  3. H

    Solar plant

    Hi everyone, I need a solar plant project on-grid with autocad thanks.
  4. S

    Single phase Reactive power compensation in Grid connected PV plant

    There are many type of control schemes available that could be implemented for controlling the inverter. The main problem I'm facing is in performing clark's or park's transformation of the single phase current and voltage. Any suggestions?
  5. T

    transformer for isolating welding plant ?

    I need to protect a digital welding inverter from voltage spikes when powered from a generator, iv'e been told running it through a transformer will do this, however the welder is 240v and the only transformers i can get at a sensible cost are 240 in, and 110 out site transformers, i could get...
    • tadworth
    • Thread
    • isolating plant transformer
    • Replies: 2
    • Forum: UK Electrical Forum
  6. G

    Working live

    Hey guys, I was wondering where if in the BGB or if you have any links you could find some of regulations regarding working live, when you should etc. As an apprentice, I have already had to work live, so was wondering what the guidelines say about it, the necessity to work live and what should...
  7. A

    becoming an industrial sparkz

    Hi guys, I am a domestic/commercial sparks wanting to get into industrial work. Will having compex help me to get into this field or am I gonna hit dead ends even with compex due to inexperience. Any advice would be great thanks.
    • archsparkz
    • Thread
    • becoming experience industrial plant roman times
    • Replies: 12
    • Forum: UK Electrical Forum
  8. G

    Tool and Plant Hire discount

    Hi, does anybody have experience of dealing with tool hire companies in the North West, in particular what levels of discount can be achieved for 'regular' customers. Apologies for some laziness (I should be ringing round) but I thought I'd get some views from this forum first. Thanks
  9. P

    Plant room testing

    Hi there I have passed my2391 but was just wondering as it came up in convo how to test a plant room? This was not covered in my 2391 Refards phil
    • p11jor
    • Thread
    • going plant room stuff testing
    • Replies: 10
    • Forum: UK Electrical Forum
  10. T

    Industrial integrated plant + equiptment / control systems / maintenence

    Just out of interest really, how many of you guys have ever come across / worked in the above mentioned environment? i personally trained as an installation electrician as i guess the majority on this forum have, again i personally prefer working on control systems and maintenence > installation...
    • theroadblock
    • Thread
    • control industrial maintenance plant systems working
    • Replies: 11
    • Forum: UK Electrical Forum
  11. S

    Cordless SDS Drill

    Hi All This is my first post on here so thought I'd introuce myself, Im 27, a first year Adult Trainee in Scotland and really loving my new career as an Electrician. I came accross this forum via one of the guys from college. As i've just started out im in the process of building up my kit...
  12. L

    how to calculate and avoid the Voltage drop at starting of gas compressor

    In a gas power plant There are 2 main transformers ( st1 , st2 ) taking from the grid 380 kv and step down to 13.8 kv ,and then feeding the main bus which it is divided into 2 buses ( A Feed by st1 , B Feed by st2 ) between them bus tie st1 = 380 kv/13.8 kv st2= st1 Bus A feeding gas...
    • live11
    • Thread
    • aus avoid building calculate compressor feeding gas how to plant starting voltage voltage drop volts
    • Replies: 1
    • Forum: Australia
  13. K

    Christmas at work!

    Any of you on continuous plants will know this senerio At Christmas production and maintenance would work 6-2 only. 2-10 and nights would just have production skeleton crew on. But if it was you due shift and you were needed you had to go in. Christmas day was special, I didn’t mind going...
  14. K

    GE Jenbacher Gas Power plant Trainer

    Dear All, I need a help If some body have a document about for training purpose GE Janbacher gas engine and auxiliries of this plant. I am the technical trainer of the power plant of GE Genbacher. I am waiting a great reply from your side. Thanks
    • khalidjan74
    • Thread
    • gas plant power
    • Replies: 7
    • Forum: The Welcome Forum
  15. Y

    Norms that apply to photovoltaic power plant

    Hi, now days i'm searching for all norms which have to be taking into account during the conception of photovoltaic installation. Considering that G59/2 applies for an installation, i'm wondering if the guide "ER G59/2 : Recommendations for the connection of Generating plant to the Distribution...
  16. W

    Your own plant

    How many out there are ensuring that their plant carries a valid label and not one that's been made up (not suggesting anyone would!) As most will be aware site plant requires 3 monthly tests.
  17. K

    Production workers

    Who hasn’t come out with some of these statements at sometime? This is fool proof They can’t break this There’s no access to the work area while the M/c is working Everything is cross interlocked That can’t happen it’s physically impossible I’ve checked everything They’ll never defeat this...
  18. D

    CACTUS Plant

    doing a PIR today and reached over the plant on top of fridge to find that it was a cactus plant and it attached its self to my t shirt and fell on to me before i realised what it was i had been injected with about 40-50 spikey things with barbs!!
    • DurhamSparky
    • Thread
    • aus plant
    • Replies: 16
    • Forum: Australia
  19. S

    Swimming pool plant

    Gents. Doing a swimming pool plant Monday. Going to be doing a bit of fault finding to find out why it's not working. If anyone's had any experience here before I'd appreciate it, anyone familiar with the types of pumps and motors involved. Thanks.
  20. R

    Solar Farm

    We're pretty rural and I've had several requests lately for field based solar farms. I understand in theory the following.... Enquire of DNO - Can we site a solar farm here? Contestible and no contestible costs Farmer will need planning - What does he need to submit with planning app, a...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Back
Top