possibly | Page 2

possibly

Recent contents View information Top users
  1. yellowvanman

    PA Testing surge protection extension lead

    Try not to do PA Testing but had to do it today! Was doing the above today after a cottage got flooded. Lead didn't appear to be wet, but failed the insulation test @ 0.7Mohms, this was at a test voltage of 250V. Re-tried it with my installation tester at 100V and 50V and got the same...
  2. Simonslimline

    Free energy solved possibly?

    :shades_smile:
  3. CK Tools

    C.K, Please Help Us To Help You - And Possibly Win!

    Hi all You may have seen our previous post regarding research – but geographically couldn’t make it Well, we are going to try to gather your collective wisdom with an internet survey For completing our survey, you will be entered into a prize draw where a number of you will win one of the...
  4. B

    Possibly fried circuitry, Need HELP!

    So I bought a pair of oster clippers from the states, took them to a guy who owns a hardware shop and asked what I needed he handed me a Us to Uk adapter and everything was fine. I used the clippers for maybe 5 weeks before they started cutting out when they were moved abit harshly, it gradually...
  5. D

    Possibly a daft question...

    A friend has asked me to rewire his house, I am allowed to do this with me being a qualified spark aren't I? I have never done anything for myself always through a company so not sure where I stand :/ Daley
  6. B

    Pictures - possibly done before

    But I'm fairly new here.... So any guesses for what this is?
  7. S

    EICR - 4.4 - fire rating of CU - code rating?

    any advice what code to put here if CU looks ok but unsure if the wall it's mounted on, is fire rated?
  8. driverman

    domestic new build first fixing

    Hi Guys, I'm going to wire a completely new build house soon and I've been out of game for many years.The house has those Z joist which have timber top and bottom and hollow between, using metal Z frames for strength. My question is for those of you that come across this a lot is, When...
  9. J

    Possibly identify!

    I have a customer who has sent me a picture of an outlet/socket (unknown) in a house he has just purchased, but I don't recognise it. From a second pic it looks like the cable behind is a single 1.5mm or 1mm T&E. I'll go round and have a look later in the week and trace the cable if necessary...
  10. C

    V Phase Install in domestic property - possibly against regs - your thoughts?

    Hi All, Wondering peoples thoughts on the V Phase units? We have been asked by a company to install one but upon receipt of the unit and going over install guide the suggested circuits that can be installed on it are sockets and lighting pretty much. IF as they suggest in their configuration...
  11. D

    possibly the worst one i have ever seen

    Evening all went to a property today that had tripping RCD found 2 32a rcd protected MCB's with two cables in each tested and found to be no continuity on further investigation (3 hours) found the whole flat to be damp and low IR's everywhere also chocky in the sockets where 3 2.5mm cables...
  12. E

    Spurred power via fcu and possibly a light.

    Hi all, I was looking at having power and light. Is it possible to spur from existing ring main via 13 amp switched fcu and 2.5 mm to supply one double socket outlet and then come off that via a 3amp switched fcu and 1mm to supply one pendant light fitting. It will all be surface mounted so will...
  13. R

    oven and hub switch optional?

    Hello there. I recently had a new kitchen installed. There is a large switch that lights up when switched on above the oven and hob. I thought this switch had to be on for the oven or hob to work. However the oven and hob work if this switch is off or on, it seems to make no difference at all...
  14. P

    Contactor problem - possibly

    Here's the scenario: Big house with detached granny annexe. Three-phase supply. Single phase supply by buried SWA to annexe for power and light. Separate three-phase supply by buried SWA for the annexe night storage. The clock for the NSH is in the main house. The 3ph goes to a fused switch...
  15. M

    Intruder alarm issue - possibly sensor problem?

    Hi I have a Scantronic intruder alarm installed in my home. Recently it stopped working. I can't arm it anymore. I think the reason is that somehow it lost the think round shaped sensors on the door frame. When the main door is opened, earlier I could see two which circular sensors - one...
  16. Amp David

    New van possibly on the horizon

    Current Berlingo has started drink fuel like its going out of fashion. In the garage Tuesday to see whats up. Just hope its not too serious, as things to do with the hdi fuel system are normally big bucks. May use it as an excuse to look at a newer van
  17. M

    Looking for part time tutor possibly online help with formula things,,

    Im new on the site and just starting my level 3 2330, i would like to get up to scratch with the formula and need some help. Im in bournemouth please get back to me if anyone local would be willing to help, thanks Max
  18. J

    Fan Switching...

    Hi Guys, Installing a whole house vent system that will tick over constantly. PIR's to be installed in each bathroom to boost the fan while the bathroom is occupied. The client would like an extra vent in the utility room to extract the heat while the tumble drier is running...?!? Crazy i...
  19. M

    retail / office heating

    Morning all, I'm just quoting for a refurb of a retail outlet, 2 storeys, where ground floor will be retail, possibly photographic studio, and upstairs will be office / storage space, possibly gallery. Lighting, power, comms all sorted, but electric heating? Water? Oversink hand wash heaters...
  20. F

    IR Testing

    Im completing a EICR for an empty shop which is over 3 floors, TNCS 250Amp TP+N supply which feeds a MCCB board, there is a MCCB per floor plus the lift, the tails into the MCCB board are in galv trunking and the supply up to the floors are wired in SWA. We wanted to test the insulation...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top