been trying to have a sort out of stock lately and i have all sorts of crabtree, merlin and hager rcbos and a few 17th c/tree boards if anyone's interested? after changing job i don't get many inquiries on domestic anymore and when i do i need bloody part p!
30 wylex Rcbos various sizes.some boxed,some not but all brand new!!!!! I do have more so can prob meet your size needs!!!! could sell 30 for £170 or seperate if yous wish:D
Just wanted to share something to you all. Rewired a bungalow which had BS3036 stuff and replaced with nice new shiny RCBOs.
Customer called me to say at 7.20am every morning, all the RCBOs would trip off like dominoes.
The electric board accused me of having installed faulty circuits...
Hi folks, just a quick one. Title says it all really..
Anyone know for sure of the new Contactum RCBOs will fit the old (16th edition era) boards?
Thanks a lot
Installed a garage CU, 2 way. As the house is TNC-S an earth rod has been installed, which is giving an Ra of 102 ohms.
The supply to the garage is protected by a MCB on the non RCD side of the CU, as installation methods don't require RCD protection.
The circuit in the garage has been...
Howdi
I have a 32a ring that when I test the RCBO it won't achieve 40ms when tested at 5x in 0 degrees but when switched to 180 degrees it trips well within 40ms The Zs measured is 0.49 ohms the circuit trips at 1x okay so Im a little confused and am looking for help to point me in the right...
hi folks was wonderin wat kind of consumer units u's are using at the min? im not long started out myself and still chopping and changing, have been usin control gear this past few weeks
i
I have tried to search for the advice already but couldn't find it. Any point in the right direction appreciated.
Sadly I have Economy 7 and it has been causing me a great deal of difficulty with switching on at the wrong times and now the boiler has also packed up. I have a small flat...
Folks,
What do you guys do when the fly leads on RCBOs are too short? The neutrals are usually OK but the earths rarely seem to reach.
I have to fit 5 RCBOs in a single Hager CU next week and wanted it to be tidy.
Ta!
I have Downlights and Fan to fit in a bathroom, the customer has one of the old Square D Qwikline CU's, where the MCB's clip into a kind of Live din rail, (like crabtree starbreaker CU)
I need a 6a RCBO Is there even one available..?
Any of you come across one?
( 1 ) What would cuase a consumer unit, with RCBOs installed, to all trip out at virtually the same time, at about 7am every morning, but at no other time ?
It's a TT earthing system, with overhead supply cables linking the house to the pylon in the street. Then two cloth covered live tails...
Various rcbos type b for sale 40 amp -6 amp
5 x 40 amp type b
3 x 32 amp type b
3 x 20 amp type b
5 x 16 amp type b
2 x 10 amp type b
9 x 6 amp type b
all rcbos are wylex some are boxed some are loose all brand new!!! Loose ones have stickers on terminals to warn about insulation tests...
Hello Everyone,
I am required to test my practical assessment soon and notice that my consumer unit has three RCBOs fitted.
There is a neutral wire and a cpc (beige) fitted from each RCBO. Am l required to remove these for an insulation resistance test which is 500V and may damage the RCBO...
Hi
Am I ready this correctly?
Page 44 OSG table 7.1.
On a ring circuit for a TNS system, No RCD, 2.5/1.5 T+E
A "type C rcbo" is not permitted ZS being the prohibitive factor?
If so does anyone know where I can get a type B wylex RCBO?
Thanks
Hi,Doing a job with tt system.There are a number of 3 phase circuits.Has anyone used them before ?? Mem dont do them,hager dont,merlin gerin do but it takes up an extra 3 ways in the board.I could fit an extension box with separate rccbs.Any ideas anyone ???
Coxy
Use of RCBO,s ?
Am I correct in thinking these are primarily for use where you want an individual circuit to be rcd protected but you do not want that circuit affected by other circuits tripping the batch rcd.
So modern boards give split load via 2 rcds and the couple of ways fed direct from...
Got to change a 3 phase, 24 way dist board that feeds a few small offices and a small distribution area, the existing old board (dorman smith) has no rcbos fitted to socket circuits just old type mcbs. Question is under the 17th do in need to fit rcbos to rings feeding office sockets (computers...
I have about 70 wylex split load boards and 1000s of MCbs left in the container and my lads are still installing them at the moment since i cant get hold of any 17th boards and any rcbos,
My question is, do i have to start fiiting 17th boards since the 1st of july or can i get away with the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc