recommend

  1. Michael J

    CU recommend max height

    Doing a complete rewire on a domestic property. The client is adamant that he wants the consumer unit flush to the ceiling not complying with the 1350-1450mm requirement. I have shown him Approved Document M but he’s having none of it. What would you do in this situation?
  2. G

    Recommend dimmable constant voltage driver for a LED strip

    Hi, can anyone recommend a dimmable constant voltage driver for a LED strip and any suppliers? Many thanks
  3. Mark Wright

    B&Q Pir light had it, less than a year - please recommend new pir

    I installed a B&Q pir light under a year ago and it's flickering the LEDs have had it, it's totally contained and the LEDs are hard wired, pretty peveed, can anyone recommend a good outdoor pir light, one that comes with a rubber flex is preferred Don't know what I.P rating and was probably...
  4. Kingers

    80A DP mains isolator

    What would you recommend as an 80A DP mains isolator switch? Background: My DNO fitted a 100A cut-out fuse on 16mm2 service cables, despite their own published policy requiring 25mm2 service cables for such a fuse rating. (At least, the fuse carrier is labelled 100A). So, they are coming out...
  5. A

    Hiya, can anybody recommend any decent 12v/24v drive over light fittings please for an upcoming driveway job? Ta

    Hiya, can anybody recommend any decent 12v/24v drive over light fittings please for an upcoming driveway job? Ta
    • Andy.D
    • Thread
    • anybody decent drive driveway electrical work fittings job light light fittings please recommend
    • Replies: 1
    • Forum: Lighting Forum
  6. M

    Rewiring an old Harley. What connectors would you recommend to join more than one wire together to a single pin?

    (UK). I am renovating a 1988 HD 1200 XLH Sportster. The previous owners have butchered the wiring so I am rewiring it by hand. There are a few places in the wiring where a single cable needs to connect to two others. An example is from the fusebox. The output for the Accessories 15a fuse needs...
  7. T

    Can anyone recommend an inexpensive good earth leakage clamp meter

    Can anyone recommend an inexpensive good earth leakage clamp meter
  8. Vortigern

    What fire alarm system do you recommend

    Just wonder if there are any recommendations for a fire alarm system. A simple system conventional. It is a building (mosque) quite small as it goes around 100 sq m. 10 smokes one heat for kitchen. Three break glass, two sounders. So quite a small system. I have arranged the wiring for sounders...
  9. B

    Can anyone recommend any good UV protected conduit for running network cable externally?

    Can anyone recommend any good UV protected conduit for runnign network cable externally? I plan on running around 10 cables (7mm diameter each) from the loft to the 2nd floor and ground floor, but the cables are orange and i'd like to hide them in some pvc black conduit. A lot of the stuff i've...
    • Beefy
    • Thread
    • anyone cable conduit network protected recommend running
    • Replies: 2
    • Forum: UK Electrical Forum
  10. peeko

    Anybody recommend good calibration services?

    I don't know if it's just me but the prices of getting testers calibrated has seemed to have gone through the roof. I appreciate the kit isn't cheap, I got a quote for some myself a few years back, but when the guys drop in to do it in the wholesalers I've also seen how long it takes. I've just...
  11. R

    Which CCTV do you recommend.

    Hi everyone, I’m a qualified electrician been retired now for 2 years. I’m looking for a bit of advise My son is having problems with his neighbour and wants to fit 2 x Cctv cameras with audio. Would like a system that is easy to use What can you recommend? Thanks
  12. J

    Recommend me a LED downlight for this room

    Below is a photo of the kitchen in my new build house. It will have 900mm high worktops in a U shape at the end of the room. Can you recommend me a good quality LED downlight? As you will see the ceiling is high so I guess I will need something with a bit of power and a decent beam. My...
    • jimlyons97
    • Thread
    • downlight led recommend room
    • Replies: 2
    • Forum: Lighting Forum
  13. G

    recommend bathroom extractor fan

    Hello Currently got a extractor connected to light switch so when you switch light on the fan comes on, however it's not to powerful and the room fill up with mist condensation on the walls when the shower is used. Looking to change it for a good powerful extractor fan. Need some advise from...
  14. Marcus Vaughan

    Can anyone recommend a cutable mains voltage LED tape?

    As above really. I've been trying to source a length of mains voltage LED tape to fit behind a purlin, not being keen to try and hide a transformer/driver for 12/24v. Distance is 4.5m but everything I have found at mains voltage is cut by the metre. I know I can do better than that because I...
  15. L

    Recommend tin snips for commercial work

    Hi, any recommendation for tin snips? Regards.
  16. D

    NVQ3 2357 books

    I am just starting my NVQ3 2357. Can anybody recommend any good books that complement this course. Thanks for your help.
    • Dime Bar
    • Thread
    • anybody books course electrical nvq nvq nvq3 recommend starting training
    • Replies: 11
    • Forum: The Welcome Forum
  17. sythai

    Wireless/ App switching.... what do you recommend

    Hi All We've recently got a foot in the door with a decent garden company who are promising lots of work. There's been talk about wireless/ app controlled lighting, pumps etc. To be honest I've not been down this route just yet. Just seeing what makes any of use/ recommended please? Only...
  18. mattg4321

    Recommend me a network switch?

    Bit of background, finished wiring my place a while back and I have run cat6 to numerous places around the house. I've installed hundreds and hundreds of data cables in the past and have a reasonable idea of how it all works, however I could do with some input from more experienced (in setting...
  19. Lucien Nunes

    Recommend me a small CU with DP MCBs / RCBOs

    I need to go shopping in the morning for a small metal CU, about 5 outgoing circuits, but they have to be fitted with DP OCPD including some C-type. One overall RCD is OK but if I can get suitable RCBOs that is a possible. It's so rare that I fit a small single-phase board, I've no idea which...
  20. T

    Can anyone recommend a tender company ?

    Hi can anyone recommend a Glasgow or Scotland company that will price commercial tenders for me. I don't have the time to spend pricing larger jobs. Thanks
Best EV Chargers 2025
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top