recommend | Page 8

recommend

Recent contents View information Top users
  1. S

    recommend ladder

    Hi All I am looking for a lightweight ladder (as I am a lightweight!) which would be ideal to reach the average house gable end. Does anyone recommend any make or type ie: combi ladders ? I would prefer one with a stabilzer bar at one end. Has anyone bought one from this site Ladders|Loft...
  2. M

    Anyone use battery angle grinders?

    Hi In a change from the usual type of post here, does anyone use battery angle grinders to trim the tiles? If so, are they any good, given that the work (I suppose) is light!!!? What makes do you use and can you recommend? Or would you recommend a 110V version + trailing cables etc. Mike
  3. D

    Who can recommend a book for a beginner?

    Hi guys, I'm looking at getting started in the industry. Planning on getting myself on a course in a few months when I have some time off my current job, but have started a bit of background reading in the meantime. Done a bit of DIY electrical work before and know the basics, so thought I'd...
  4. L

    Can anybody Recommend a good clampmeter?

    As above can anybody recommend a good clamp meter?, does not have to measure DC, but would like it to read earth leakage , my old one has packed in.
  5. L

    Would you recommend this....r.e.smoke alarms?

    Morning Fellas Inspecting a mains operated multilinked smoke & heat alarm system this morning for a house of multiple occupancy. Having previously worked in the property I noticed the system has its own 6A MCB which is RCD protected Would you recommend that the system has a NON RCD...
  6. F

    Site survey, voltage data logging

    Hello all, I have ran into a problem with a SB3300 tripping out on a recent install. After checking mains volts and hertz I got a reading of 50.2 hertz and voltage fluctuating between 252v and 262v. A quick read of the inverter spec makes me think over voltage is the problem. Can anyone...
  7. P

    p v panels

    Can anyone tell me which they prefer to install and why - Romag or REC?
  8. G

    Can anyone recommend a board for RCBOs that has some space inside?

    Hello as above really, looking for something with some space inside so can make a tidier job of dressing cables. Quoting for a job that will have 12 RCBOs fitted needing to leave a few spare ways. Wasn't too happy with the last one with the neutral and functional earth fly leads in there too (9...
  9. spud1

    Can anyone Recommend a software?

    Hi All, Can anybody recommend a comprehensive health and safety software tailor made for electricians in order to help complete trade specific risk assessments, method statements etc??? Thought it was about time we stepped up our game from the handwritten templates!:rolleyes:
  10. P

    can anyone recommend somewhere i can get the 17th edition asap and cheap !!1

    Hi I have just had my nvq3 signed off and waiting for the cert to come through so in the mean time i want to do the 17th full test asap so that i can apply for the jib card. can any one suggest anywhere that may be suitable,I live in Croydon. Many thanks in advance. Paul
  11. N

    Recommend a thermal image camera

    Can anyone recommend a thermal image camera I have looked at the fluke TI9 and TI10 also the Flir I40 has anyone used these cameras or can give advice. Many Thanks!
  12. J

    Industrial Cooker Cable Size

    Installing a 3 phase cooker with 6kw on one phase, 6kw on the second and 3.5kw on the third. The instructions recommend using flex. In BS7671 I'm using Table 4F1A, page 292 and therefore need 6mm flex. This sounds a lot for 26.1 amps on each phase. Am I being dumb? Also can anyone recommend...
  13. S

    Can anyone recommend a link or website where i can find short circuit capacity table

    Can anyone recommend a link or website where i can find short circuit capacity table for type C MCB's
  14. S

    Recommend a cordless surface planer?

    Need one, whats the best around? has to be cordless bosch one £145.00 body only Bosch GHO18VN 18v Cordless Planer (Body Only) GHO 18VN £145.00 cant find many... 80mm cut would be ideal thanks
  15. W

    can anyone recommend a consumer unit for a garage?

    As it says really. Have seen the 2 way rcd protected ones. Looking for a 4 way so there is a bit of room for expansion in the future. Am looking for one already loaded with RCD + 16A + 6A MCB's. What would you recommend? better makes? Any links appreciated. Thanks!
  16. V

    Grid switches

    Hi Folks, Renovating a church and will need to put in grid switching due to the amount of lights going in. I have looked at the click range of grid swiches and would ask if any of you have a review on the product as i need to make a purchase very soon and liked the design & look of it. Would...
  17. D

    Recommend me a laser level?

    Need a laser level, I need to transfer a measurement from the floor to the ceiling, and also project a straight line (also on the ceiling). I've used one of these before and really liked it, not sure if it would give me a line from floor to ceiling though?- Dewalt Self-Levelling Internal Line...
  18. L

    1 Man working?!?!

    Hi Guys, I am thinking of working for myself, If so I would be working on my own, how do you chaps find this (to the guys who are out there working for yourself and on your own)? On rewires, pulling cables in etc etc and in general, Generally where I work now I have always got a 2nd pair of...
  19. Dan

    ContractorForum: Liability insurance?: anyone recommend any cheap sites to use,cheers

    ContractorForum: Liability insurance?: anyone recommend any cheap sites to use,cheers in advance. also looking for van insuranc.. http://------/8EwzpL More... Follow us on Twitter.
  20. A

    website i recommend for business cards, t-shirts etc

    My other half got me 500 business cards she designed herself for only £3.50 via www.vistaprint.co.uk I could not believe the quality so took a look myself...(There maybe other online companies that do the same things). You can also design t-shirts etc etc and the rates are alot cheaper then i...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top