We are looking for other options for a flat roof install either Landscape or portrait layout. We have used Renusol Consule buckets which are ok but looking for something new/ different.
Any suggestions?
Thanks
Anyone use one of these items?
think it would be a handy bit of tackle to have if not essential
narrowed it down to a Bosch 10.8v,ridgid ca100 and a sure sight one
cheers in advance
dcf
Hi,
just pricing up a job to convert offices into flats. Not looked at putting in electrical heating before. Any recommendations on storage heaters or any other heating solution that is new on the market.
Cheers
Dave
bentleds
Thread
building
heaters
heating
other
recommendation
storage
Can anyone recommend any solar panels with high efficiency and low temperature
coefficient, similar in size to Sanyo 240 HITS?
I'd prefer the solar panel to be mono crystalline, efficient, reasonably priced, with a
decent warranty / product quality.
9 solar panels need to fit onto a hot...
Hi,
I have a question about socket positions that hopefully somebody could clear up for me. I am planning a kitchen rewire and looking at suitable accessory positions. I am aware that in most instances sockets are positioned a minimum of 300mm from the corner of the room. However I have...
Hi,
I have been asked by an elderly client to fit some nighttime light switch locators for some out buildings. Can anybody recommend a product that will work with a metal surface mount back box and switch? Ta Monky
cablemonkey
Thread
aus
lamps
light
neon
neutral
plate
recommendation
switch
switches
I think I need to buy some personal tools for practice and for work.
What kind of tools do I need to buy?
I can't afford to buy expensive and high quality tools.
So will you recommend some basic tools which is not so expensive and is not rubbish?
Hi
We are a fully approved NICEIC electrical contractor as well as being an NICEIC approved domestic installer, who have been asked by one of our customers if we can carry out the final connections and issue certification (Domestic Electrical Installation Certificate and G83/1 certificate) for...
Keith_F
Thread
accredited
certificate
courses
degrees
domestic
engineer
engineering
niceic
recommendation
salary
solar
students
Good Day Everybody,
I am desperately looking for a copy of the Engineering Recommendation G59/2, and all I can find are the amendments, but not the actual document. Can someone please point me in the right direction.
Thanks
Werneroeder
Thread
courses
degrees
document
engineer
engineering
recommendation
salary
students
I am 30 years old and looking to change career to working as an electrician but i don't know what course i should take. I would like to get some experience working on new build building sites/refurbs as an electrician's mate and then become gaining a qualification as an electrician in college...
Hi fellas. I'm pricing a job in deepest Cornwall which is around 100 metres from the sea. Obviously sea mist will be an issue and I wondered what panels you were using to negate this issue. I am looking at Day 4 panels but these seem a little overpriced. Any advice is welcome.
Hi all
Can anyone confirm the BS number for a fuseswitch - I believe it's 60947-3 with BS88 used in the supply characteristics.
The ceramic guard on L3 is half missing and was going to put Code 1 but it is a commercial building so is that too harsh?
Cheers
Hi,
I'm a first time poster so please bare with me.
I would appreciate your thoughts on my interpretation of a code 2 recommendation for a PIR for a Motorway road lighting installation. Currently, I can only find guidance on the recommendation codes for domestic installations so my assumption...
Johny Foreigner
Thread
canada
code
installation
lighting
pir
query
recommendation
Is it possible to have a section for maybe unregistered members of the public wanting electrical work done to post in and offer on here?
I know this isn't an advertiseing forum but it could help alot of guys on the forum get work or at least give lads a chance to bid on it?
Hi all,
In our DNO notification form it asks for confirmation that, for the inverter:
"Protection settings have been set to comply with Engineering Recommendation G83/1."
&
"The protection settings are protected from alteration.(except by prior written agreement between the DNO and the...
does any one know where i can get/ or veiw a copy of this doc?
i dont really care if i cant save it or print it, i just would like a look though it to what its about.
cheers martin
coxy84
Thread
code
courses
degrees
distribution
engineer
engineering
recommendation
salary
students
Hello there,
A customer has four external lights that are all looped on one feed. He wants pir motion sensor lights but wants only one pir instead of one on each light each light due to the cost. Can anyone recommend a decent pir that does not need to be wired in 3 core as the wiring is...
Hi everyone
Just doing last minute revision for the final practical (i.e. Periodic Inspection/Fault Finding) on the 2330 L3 (Tue 22nd :eek:) & I've just stumbled across something that may come up, but I'm not sure how to classify it.
If there is a bridge made on a ring final (i.e. a ring...
Hi All,
Starting the design of the electrics for the kitchen & utility in a new build. I'm looking to put a grid switch in the utility and one in the kitchen. I'm currently looking at the MK ones but has anyone any other recommendations?
Also looking for some advice with regards cabling...
Afternoon all.
My Public Liability and Indemnity insurances are up for renewal at the end of this month and as I'm looking for the best deal, can anyone recommend a good agent/company for a quote?
Thanks
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc