removing | Page 4

removing

Recent contents View information Top users
  1. P

    Removing redundant 2nd CU

    I just want to get some advice before getting an electrician in, as we don't know any so want to be able to know if we can trust what he's saying. We've just moved into a new 3 bed house. One master and 2 small bedrooms. The main CU feeds a 2nd CU upstairs in the 2nd bedroom. The Setup is...
  2. P

    Removing socket

    Got to remove a socket and connect it out in a house, the room is being converted to a bathroom so putting it under floor in Wagos , the circuit is fed from a BS3036. Will I need to protect the circuit with a RCD as I have carried out a alteration to the circuit or not.
  3. SolarCity

    Question regarding removing panels and reinstating them

    I have had a customer phone me and he has intends to install some PV panels in the next few weeks. He then intends to remove them, rebuild the house and reinstate the panels. No problem there. He then asked about the tariff he can expect. Will he drop to the new build tariff or stay on...
  4. D

    Removing a bathroom shaver socket

    Hi Folks, I have a working, but redundant, shaver socket mounted on a bathroom studwall that I need to remove. That shaver socket is wired into the lighting ring and when removed, each side of the ring will need to be joined back together. That joint/connection will be inside the stud wall...
  5. W

    removing & reinstalling tap off box for overhead industrial busbar 400v

    I have to remove a tap off box from a 400v overhead industrial busbar system , just need to know if there is a set procedure for the removal and installation of the tapin box
  6. J

    removing spot lights

    We currently have some spot lights fited under our kitchen and the misus is wanting them replaced with different lighting. Now normally i would switch the electric off to do this but we have a family member that requires the electic on at all times due to ill health. I was just wondering if the...
  7. Rockingit

    Removing the back of a dry lining box - good or bad?

    Just wondering what peoples thoughts are on completely removing the back of dry lining boxes to be able to accomodate cable better when it's a tight squeeze and too many cables (for example if you've a three gang switch plate all fed separately from the switch - so that's six cables to...
  8. C

    Removing a storage heater time clock

    Hi, I have a set of storage heaters using an economy seven style time clock . This clock is in the attic and if there is a power cut or the lights have to be switched off this clock stops. I then have to crawl into the space where the roof slopes down and reset the time. We wish to get rid of...
  9. G

    process of removing distributors fuse???

    Hi guys i started another thread about rewiring my house but forgot to ask about the removal of the distributors fuse. I know a lot of sparks who just cut the tags and remove the fuse but what is the process of doing this properly i know a phone call to the DNO will be required but do they come...
  10. I

    removing old boiler wiring

    have a customer who has had a new bolier fitted. who ever fitted the new one has left the old supply wiring in place. Now im trying to find most cost effective way for customer so :- Would it be acceptable to just blank this wiring off in a flush box with a blank plate and dissconnect at supply...
  11. J

    trouble with newly installed MK c/u

    recently changed an old fuseboard to a new MK consumer unit with 2rcbo's and then RCD with 5 mcb's on it, now i IR all the circuits and all came out at <299Mohm but since day 1 the rcd has tripped whenever a high load is switched on? i tried the up and down ring and the fridge radial on 1 of the...
  12. V

    removing an off peak supply.edf energy

    hi all a couple of times now ive been asked by a customer to arrange to have the old off peak supply and controll gear removed (after all you pay a higher rate in the day if you have o/p supply). both times when ive contacted edf energy for removal of the meter they are telling me and the...
  13. S

    OT... Lock-off... removing someone elses!

    Hey guys... a little off topic but I sense there's a few 'production' orientated Industrial bods on here that do more than just electrical. We have a machine, connected to a piped-feed system - a large one - and some piping mods have been carried out by a contractor. We came to start up the...
  14. J

    Changeing CCU and removing main head fuse

    Hi all, I am just finishing my Level 3 City and Guilds level 3. I am going to replace an old re-wire-able fuse type CCU with a dual RCD CCU. When replacing a CCU in the past i have just removed the main head fuse to disconnect the supply going to the CCU. But someone at my collage has...
  15. U

    Removing fire alarm call point

    Hi Guys, As part of a big ongoing job, have been asked to disconnect a fire alarm call point. I did so but am having doubts as to if there is more involved than I originally thought. There were two FP's 4 core feeding the point. 2 x reds connected to a terminal, 2 x blacks connected to the...
  16. J

    Removing single phase RCD??

    Hi All. I have another question for you. I suppose its really a 'is it legal to' question as its a business setup providing power to customers via 16amp sockets. Please refer to the picture attached, at the moment, 3 phase comes in on the right, into a 3 phase RCD, then the 3 phase goes...
  17. Amp David

    Removing old storage heaters

    Just wondering when removing these old things, how do you get rid of the blocks from inside, especially if they contain asbestos. Got a few to get shut of on a job and want to include any extra cost involved in my quote. Cheers
  18. B

    Removing economy seven meters

    Howdi all Who is responsible for the removal of economy seven meters..Can I just take them out and simply use the other meter..Im looking for any advise on this as its all new to me Cheers chaps.
  19. R

    notifiable? Removing fixed appliance

    Hi, like so many here, I am a newbie going through the motions for training (recently got 2382 and going onto 2392) for domestics .. obviously it seems , it wont be for the money..hmmm Anyway, I have a qualtified plumber friend who with a customer that has an electric heater on a fused spur in...
  20. R

    Panel heaters in/storage heaters out

    Haven't had the pleasure of working with panel heaters, are they relatively easy to install? What I'm more concerned about is removing old storage heaters, is there anything tricky involved with this or do you just disconnect and whack them out? Any help would be appreciated.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top