replacement | Page 9

replacement

Recent contents View information Top users
  1. N

    Metal Halide still not working after control gear replacement

    So I've got incoming mains splitting (forking) off into 3 light fittings. They are HID metal halide lamps. The middle one (thats not working) is 70W, and the other 2 are 150W. I've replaced the control gear and bulb. It still just flickers blue and doesnt actaully start. It also buzzes at the...
  2. G

    Electric Fusion Boiler Repair or Replacement

    Hi, I have a 1st floor duplex flat and upstairs in the boiler room is an Electric Fusion Boiler with hot water cylinder tank. The hot water tank is working fine for the water but the boiler / central heating system which is a bit of a beast, (installed in 2006 image attached), is now faulty...
  3. Lister1987

    Fluke C1600 Case - Replacement Tray?

    I've got hold of a Fluke C1600 carry case for my testing gubbins but it appears to be missing the tray insert that should come with it, any ideas where one can get a replacement?
  4. baroncelli

    Help needed assessing a light replacement quote for a lift

    Our building has a lift where one of the lights burned out and our building management got a £479 quote from a lift management company for fitting a led replacement.# I took a look at the light bulb and found it's a CFL Philips Master PL-C 18W/830/4P one, available for £3.80. I bought one...
  5. ferg

    Replacement tool bag

    I'm retiring my C.K. Magma ma2634 tool tote after many years of faithful service. So am now looking for a replacement. Any suggestions?
  6. O

    Replacement bulb fails

    Hi, I've "inherited" a light fitting which I believe used to work okay but then stopped. I've tried swapping the "bulb" (it's not a bulb!) but it's still not working. I'm unfamiliar with the fitting so I'm concerned if I've bought the wrong sort of bulb, which I tried to match with the old one...
  7. T

    Help with choosing replacement capacitor

    I recently had the motor on my Delta dust collector stop working. It was setting off the breaker on the side of motor after just a few seconds of turning on. After researching I discovered the problem with this motor is commonly the run capacitor. When I opened the cover to the capacitor I...
  8. naylorpd

    Finding replacement LED driver

    I have in LED light which has stopped working. It's well-travelled, made in China, bought in Azerbaijan and installed in the UK. I assume the problem is with the LED driver, picture included. Made by Guo Xin, model GX-F36x1W for which an internet search reveals...nothing! So how do I find a...
  9. bigspark17

    Water heater instantaneous

    Does anybody have experience on instantaneous water heaters suitable for domestic situations instead of cylinders. Something like this in the link? https://www.fischerfutureheat.com/electric-heaters/aquafficient/?gclid=EAIaIQobChMIwLm0p7il4wIVQ7HtCh0CTgQsEAAYASAAEgL0VfD_BwE
  10. D

    Advice needed please for replacement inverter

    I have 16 245w (declared capacity 3.84kW) panels on a south facing unshaded roof on the south coast of England producing around 4200 kW-h a year for the last 7.5 years; I have had two inverters fail in that time, the first replaced under warranty (both Mastervolt SunMaster). I have no schematic...
  11. rolyberkin

    2D led replacement for bulkhead with emergency option

    Probably a silly question but is there a plug in option for 4 pin 2D emergency/maintained bulkhead using the existing control gear and batteries, if I plug in a 2d 4 pin LED bulb what will happen??:)
  12. M

    Consumer unit replacement

    Hi, we have been asked to relocate a consumer unit however the meter cupboard will be on an outside wall 7m away from the consumer unit, the main switch is under 80amp, im just wanting some opinions on the way to overcome this, am I right in thinking I could run 16mm swa from the consumer unit...
  13. J

    Replacement access door on SECTOR consumer unit

    Hi all, a couple of weeks ago I managed to smash to smithereens the transparent plastic access door/cover on my sector consumer unit, that's at the top of my stairs. I need to get a new door/cover to replace it. I know all C/U's now are metal, but I was wondering if anyone has an old one, or...
  14. John Turner

    ES replacement for BC Lampholder

    Can anyone tell me where I can buy an ES (E27) Lampholder to replace the BC one in this photo?
  15. B

    Need advice regarding electric oven replacement please

    Hi, My current oven is a whirlpool 2.3kw hardwired to a 13amp switched spur. The oven I’m thinking of buying is 13amp and requires a 2.1kw connection. Can I use the cable from the existing oven and connect it to the new oven? If so, is it legal to do it myself? Thanks in advance!
  16. P

    Replacement capacitor required

    Hi I need to replace a capacitor from a fan but I can't seem to find the exact one online. Would anyone be able to point me in the right direction of where I might be able to get hold of one? Details say cbb60 450vac 50/60hz 40/85/21, please see attached photo. Many thanks
  17. rolyberkin

    Double batten school type flourescent replacement

    Any suggestions as to a good looking (in a modern building) retrofit for a double flourescent light fitting, the current lights are similar to a Knightsbridge 2 as below. Have converted some of the below to LED which I think is the most cost effective solution but interested if anyone has...
  18. N

    Need electrical advice failed part and need replacement but unsure of part name pic included

    Alternative choc block failure cannot seem to find the one in the photo attached in common b and q Screwfix shops, can anyone give me the correct name of part? as it is not a normal choc block, or can anyone link me to the part for ease of purchase . Thank you
  19. M

    Wilo Pump Capacitor Replacement

    Hi All, new member here. I have a Wilo Gold RS50 pump fitted to a solar thermal system. I suspect the capacitor is faulty and wish to replace it. However, I cannot see the method to disconnect one of the capacitor leads (sited between the L & N connections). It is very tight and I don't want to...
  20. G

    Replacement Switches for Memera 3 Board

    Good afternoon all I have a friend whose flat has a Memera 3 consumer board, which has the push-button test MCBs. One of them does not trip when when the button is pressed, so obviously I wish to replace this for her. However, it seems to be difficult to get hold of these now. I wonder if...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top