Good Morning. Can anyone tell me what tools would be used when cutting channels into plaster when rewiring an occupied home?
House has solid walls, not plaster board and electricians used jackhammers to channel out, without extraction. I know rewiring is messy but the house was like a building...
Hi All,
I need some advice please. I am getting the whole house rewired/plastered and at the same time, i would like to put in a telephone cable in certain room in the house. I am bit confused on what i should buy and install. I reviewed forums and they seem a bit old, so could be...
Long story short, I tried to replace my existing 3 way switch with a new 3 way switch, but I had to pretty much take everything out and my attempt at putting everything back as it was failed because now the ceiling lights controlled by the new switch don't work. The other 3 way switch is located...
hey :) i have a fuel resistor relay that a bloody melomy has chewed, it also chewed a hole in my battery and made it leak. i have attatched photos, just wondering if anyone could help me out with which black wires go where to attach the plug back onto the relay? much appreciated if anyone can...
I'm looking to replace the cable on a lamp I bought but I am unable to separate the holder to access the connections. I have tried pushing in the black tabs to release the top but I haven't had any luck. Any advice on the best approach would be appreciated.
existing fan w/light;2switches(3&4way);can i put fan one 1 switch and light on the other switch?
So I want to be able to turn off the light and keep the fan going. I currently have to unscrew the light bulb in order to have the fan running without light. Can I have the light on one switch and...
Hello, thinking of buying a 1968 home. It has what looks like an old fuse box and a small electrical panel. Nephew (electrician) saw the pic and thought asbestos and needs all new wiring. It is a 1600 sq ft house. Any thoughts? We live out if state and can’t view it.
is it normal to rewire an entire house and use the existing sockets and light switches, or would it be better practice to use the new regs 450mm and 1200? also is it normal to chase the wiring for sockets all the way up the wall rather than chase below and under the flooring, even if it means...
Hi
We are having a complete rewire of our house and also new wiring to the two-story extension that is being built.
The Sparky has said we need to change our board to a metal cased 18th edition board. Our board is only 7 years old and has plenty of headroom for adding more devices. See...
I have a room that have 6 recessed lights which are each controlled by their own toggle switch. I would like to condense down from 6 switches Down to 2. 1 have two 3 gang boxes with 3 switches each. What is the best way to do this?
Hi, after having a somewhat bad experience with a previous sparky and having to get the work fixed I'm after some advice with regards to some additional work I'd like done. I don't want to have similar issues. I'm not an electrician, I can wire a dash-cam and that is as far as I want to go, that...
As per the title, if you were rewiring a small house to be rented out would you, or should you fit an SPD?
Doing one soon and been screwed down on price a bit further than we would like ideally. However we have a quiet few weeks until a couple of bigger jobs start and it's local and empty...
My grandson is confused by conflicting information given by contractors quoting to rewire his house, which is a small 3 bed semi.
The incoming mains and meter are located at the front of the property (external meter cupboard). The consumer unit is located in the kitchen at the rear of the...
Hello, I don’t usually introduce myself in forums, but just fancied it here.
I’m not a trainee (though I’m considering it), I’m a 45 year old decorator who has a garage without power, so in conjunction with an electrician friend, I’m studying and researching how to wire it.
NOT connecting to...
Hi,
I'm attempting to adapt a fridge into a homebrew fermentation chamber with a digital thermometer controlling the compressor via an arduino and relays. Initially, all I need to do is take out the thermostat and rewire so that the compressor always runs when the power is on, ideally with the...
Hi!
I'm new to the forum - thanks for having me.
I have a question for a domestic rewire - I just bought my first property and want to know the prefered method for a rewire and if it really matters or is a personal preference.
I'm going to rip down the thin chipboard ceiling and have it...
Hi all,
As the title, just after a couple of pointers. Basically I've just bought a house, the existing wiring is the old colours but the CPC has a dark green sleeve, on top of that there is only 3 circuits for the house, a power a lighting and a 16a radial feed to the kitchen?
I've had a face...
OK so I screwed up!
Went to replace my daughters ceiling fitment (old one yellow and paint spattered) expecting to detach the lamp, remove the old cable, attach the new cable and screw the rose into the existing ceiling fitment.
Good plan which failed miserably when the new rose failed to screw...
Hi,
I've bought several table lamps that each power a 7w E12 bulb. They have US plugs and were sold to me with very dubious looking US>UK adapters. (I ordered online from Thailand and was promised UK fittings. I know, I know...) The connections are poor and the bulbs often go when switched on...
Hi everyone,
I have been asked to look at someones Garage for them as they want to be able to have more "stuff" in there.
currently it is powered by a 2.5 t&e run from the house CU straight to a 2g pattress. But they want a separate CU in the garage.
my initial idea was to henley block and...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc