Hi there,
We have a small commercial laundry which we're told need to be re-wired. There is an old 3phase 3036 fused board and wiring in metal conduit.
We've been told that the switches etc should be IP rated but it most just a damp atmosphere rather than things getting really wet. What IP...
Hi Due to Covid, I can't get an electrician to come out to fit a single semi flush lamp. So I am going to fit it myself.
So some advice would be very helpful - but if you live local to Stratford Upon Avon and happy to come out for a small job, please let me know.
At the moment there is a...
Moved into an older Lake House in Morristown, NJ. Trying to figure out what this lightbulb inside the juntion box is all about. Anybody know what this type of switch/indicator light was used for back in the day?
Hi all
Have a job to replace 6 way recessed DB. Have looked extensively online but smallest can find is 10 way. Seems there's
limited choice with these. Don't mind if have to chisel away abit to but need something preferably near the existing dimensions which are: Width 305, Height 180, Depth...
Need to find a v small, hard wired, wall mounted UPS to provide 60mins for fire alarm, emergency lights and fire suppressant (mist) in a BMO to satisfy the requirements of section 560. Phone calls and catalogues so far have only found me massive plant room size, I need to fit this in a...
I have tenants that have 3 fairly new small a/c units all the same and when any of them are turned on my tester reads hot & neutral reversed. The 15 amp circuit that feeds these units has no ground wire. Is this normal or could these a/c units be wired wrong from the factory?
Hi
I have ceiling boxes in my garage for old fluorescent lights. I want to install a single outlet in them to support new led lights. The existing boxes are round and the screw holes are 2.75 “ apart. I can’t find a way to adapt a 4” outlet plate to this box. Is there an adapter available?
I...
At some point we might want a company van. Nothing too large as most of the time it will be one guy and a handful of tools. Occasionally a motor/gearbox weighing 120kg or so, maybe the odd bit of 2m or so tube, etc.
Site has an access road which is pretty rough (one reason not to want to use...
This is proper first world problem but i hope someone can shed some light on this. I live on the sixth floor of an apartment block and have an outdoor terrace with concrete paving stones. I have put some fake grass on top with some polystone planters.
I keep getting small shocks when touching...
Hello
I hope everyone and their families are ok at this time.
During my own self-build (mostly diy)
I have to build a small living space (in a garage) two-story for myself and my family of 5 for 1- 2 years before I finish the full-size house. it is temporary but will be approx 30sqm meters...
Hi All,
Today I've found a faulty 1G light switch... OK, nothing strange about that!
Problem is that it's smaller than the usual 86mm square. This one is only 68mm square and I'm damned if I can find one anywhere. Must admit, I've never come across one this size before.
Anyone any ideas...
I am looking for a product to convert an existing lighting circuit in a communal stairwell to be emergency battery backed up. There are 6x 7W LED mains fittings, so say a max 50W load. I could just add emergency lighting fittings, but wiring and access is difficult.
It also needs to have a...
I would like a lightweight electric implement for undoing and doing up screws on sockets, switches etc. It's really just for when I am doing EICR's as you take off quite a few faceplates. There are so many options out there that i'm getting a bit snowed under trying to narrow down my search...
I need to go shopping in the morning for a small metal CU, about 5 outgoing circuits, but they have to be fitted with DP OCPD including some C-type. One overall RCD is OK but if I can get suitable RCBOs that is a possible. It's so rare that I fit a small single-phase board, I've no idea which...
Hi all
I was just wondering how every charges for cable on a small job? Let me give you and example, you are asked to replace 4 down lights, but one 1 of them you fined that the cable is to short so you replace that cable back to the next downlight, Normally i would just charge for sundries £20...
Morning all,
I'm new to the forum but just after some advice. I've been asked to price for an install on a small Office (12 desks over 3 floors of a 150 old building). Its for a firm i've done electrical work for for years so i'm happy to take it on. Its been a while since I did an office...
Just started to test a TT system, so found the earth and thought that cannot be it for the size of the house. (See pic). So tested the Ze and got 94 so less than a 100 but I thought I’d check the connections to the earth rod. Cannot find it anywhere. I can see a new main electric feed has been...
My grandson is confused by conflicting information given by contractors quoting to rewire his house, which is a small 3 bed semi.
The incoming mains and meter are located at the front of the property (external meter cupboard). The consumer unit is located in the kitchen at the rear of the...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc