starter | Page 9

starter

Recent contents View information Top users
  1. S

    dol starter

    Anybody used TEND starters and overloads? Pretty cheap, but are they worth it? Cheers!
  2. W

    setting a dol starter thermal overload

    as in the title can anyone help with selecting and setting the limit on a thermal overload relay, the motor is rated at 2.2 KW single phase, is it a case of run the motor at full load, clamp measure the max A then set the overload just above, or set the overload to just below the max CC Capacity...
  3. A

    3 phase supply no neutral how do i get neutral for the contactor coil??

    Hi I wander if anyone can help? I have just wired up 2 3 phase motors on a Farm for a Auger System, I have ran in a 3 phase supply from a nearby J.B. There is only 3 phase wires and the outer armour of the cable connected to the body of the box as the earth on the J.B. I have run these into...
  4. A

    3 phase dol starter help

    Hi, hope someone can help with this, i just bought a new dol starter from my air compressor its a 16 amp starter just need to know what colour wires go where? it has three top connections l1, l2, l3, three lower for supply t1, t2, t3 with a separate pe for yellow/green i take it, so the wires i...
  5. S

    direct online revers starter

    Hi there by off chance looking for a wiring diagram for this if possible but it has also got an indicator light on it as well
  6. E

    WEG Direct online starter HELP!!

    Hi wondered if anyone can help me fit this direct online starter as I am fairly new to working with motors and starters. This is a link to the wiring diagram I am using http://www.scribd.com/doc/21761778/DOL-Starter I am using the single phase connections but I'm not sure how the starter is...
  7. S

    e/stop in shaker starter circuit

    I have been asked to incorporate an e/stop into a fan shaker starter.The starter has a fan contactor,shaker contactor and a fan shaker timer and run down timer. The actual starter unit has its own isolating switch and there is also an isolator adjacent to the starter(approx 6 inches away).The...
  8. A

    need help on what settings to put in a D.O.S starter for a 0.65Kw three phase motor

    if i have got a 0.65Kw three phase motor does anybody know what i need to change thew settings to in the D.O.S starter??
  9. a12jpm

    Can a Windoze Starter run normal application???

    One for the computer bods: Looking to get a small netbook to carry in the van but want to be able to load sage and easy cert up on it as that's all I really need it for apart from surfing. Can I run these on windows starter as I can't really get the hang on the difference's between starter...
  10. S

    Help with a 3 phase star delta motor

    I have been called out to replace a DOL starter that somebody fitted last year, It controls a 3 phase motor on an extraction unit. The customer has said that the fan used to start slow and then after 10 secounds it would speed up to full speed. The electrician that changed the starter replaced...
  11. K

    Fluoresecent light starter

    Hi, About 2 weeks ago fitted a new 58W tube Fluroescent light fitting (£12 from B&Q). The starter has just failed on it, is this likely to be a faulty starter or could there be some other fault? Regards Kev
  12. B

    3 Phase Motor Alternative Connection

    Hi All, Here is the scenario that I have. 3 Phase, 690 Volt Motor (Delta), 560 kW and started by a star-delta starter. So the motor is connected in delta at full voltage 690 Volts after the chageover from star. Now, this motor has failed and is beyond repair, and lead time is considerable for...
  13. J

    Best starter multi function tester

    Hello everyone, I am lookin at buying a multi function tester. What is the best starter test that is not too expensive Thanks in advance
  14. L

    best place to get a starter electricains took kit for around 50/60 pounds.

    best place to get a starter electricains took kit for around 50/60 pounds but has to be decent and not tacky. preferablly draper, CK etc.... anyone know any good online sites to get cheap gear from ? thanks
  15. K

    Star/delta starter

    A mate has asked me if I’d help him with a fault on a star/delta starter. It’s a beast of a thing 800HP closed transition change over. The starter even has it’s own 800KVA 11/.44KV transformer. He’s sent a drawing but it’s that old it’s like trying to piece the dead sea scrolls back together...
  16. A

    Starter Tool Kit

    Hi guys, Quick question - anyone know where I could find a comprehensive list of required tools to get going? I'm soon to book in for my training but am busy sorting out how much money to budget for different things - tools being one. Any thoughts on how much, what to get, lists etc...
  17. E

    Few bits for a starter

    Hi Guys, I have upgraded some of my tools and have a few bits for sale which due to postage costs am going to sell as a package. Stanley FatMax Toolbag XL (As new just a bit dusty) Full Set VDE Facom Screwdrivers (4 x slotted & 2 x PZ) Hardly Used Electricians Set MORSE Holesaws (All new...
  18. W

    Dead Testing - 3Phase Motor and S-Plan

    When testing Insulation Resistance or Continutiy on a 3phase Motor, do you need to disconnect the cables from the motor? Or do you just test I.R to the starter, then I.R from starter to motor? (as the starter will be open when dead) Would a motor come under "equipment vulnerable to testing"...
  19. W

    Testing Motors

    When testing Insulation Resistance or Continutiy on a 3phase Motor, do you need to disconnect the cables from the motor? Or do you just test I.R to the starter, then I.R from starter to motor? (as the starter will be open when dead) Would a motor come under "equipment vulnerable to testing"...
  20. S

    3 phase motor

    Hi all Have a 3 phase motor 0.37kw for a small convayor belt, wired up in delta. Does this need a star/delta starter or would it be ok for a DOL starter?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top