Hi all,
Bit of a niche question - I have an economy 9 setup in my flat, so seperate circuit for heating / hot water that turns on for 9 hours a day. I want to switch to economy 7, but apparently the heating circuit will still only turn on for the same 9 hours.
Is there a fused spur timer than...
Hi there
Im looking for some sort of electrical box with a start button and behind a timer you can set for X hours every time the start button are activated.
I plan to put them on out door fans so they dont run all day and night because people dont turn them off.
Do any of you know of such a...
I have 2 storage heaters in the flat I let out (in London). They are 3.5KW As far as I am aware there has never been a separate off peak supply for these heaters. Around 5 years ago the heaters were replaced and one timer was fitted to each heater in place of the switch - the model was Timeguard...
Just a quick one! I believe this time delay switch should work for my old panel heater (1.25kwh) because it handles loads up to 16A. Can anyone confirm this for me? I had someone tell me I needed a fused spur switch but others tell me I don't.
FYI: the aim is to ensure the panel heater turns...
Prodis Dishwasher PRO30450 Timer Motor. Commercial dishwasher. I know that's terribly specific but I can't find anything anywhere on the net for this machine. Timer motor is defective. Keeps jamming mid cycle because gears are worn. So it only needs a motor. But I can't find either the motor or...
Hi,
I can't find a manual for the extractor fan I'm removing to replace on the ceiling of my bathroom.
It is a timed extractor fan with 3 points which I imagine means I just need to match the correct cables to the new fan.
I don't understand what the meaning of each point is on the old fan to...
Stupid question I'm sure...but...I have this Timer (V0DDTS), a live and neutral wire coming from the wall, a live and neutral going to the fountain pump...how do I connect it? Once connected what setting would give me 1min of power on, and then 5min of power off?
Feel kinda dumb must be honest...
Hi, I’ll start off by saying I’m not qualified but have done some electrical work before and do the odd bit of DIY where I can.
I have an LED lamp that I would like to use with a plug in timer and it turns off fine. The problem is when it turns back on power goes to the built in switch (see...
hi everybody :) i have recently bought a staircase timer, and on the side of it there are 2 different wiring diagrams. one of it says 3 wire and the other says 4 wire. I have always connected them in the 3 wire diagram but i'd like to know what is the other one and for when it is useful. here is...
Looking for advice to add a relay to a well pump timer. 1/2 hp 230v submersible @750’. The timer is rated at 10amp.
1578238119
Does anyone have any recomendations?
I purchased a 7 day timer fused spur switch to replace a standard fused spur on a downstairs wc electric towel radiator. It seemed like it would be a simply swap out. However, it looks like the water supply earth bonding is connected into here and uses a thicker earth cable than the new spur...
(diy level) Does anyone have experience with staircase/corridor timer switches. I've bought about 6 different makes of the damn things and I can't get any to work. I've been getting advice from a self described electronics expert but he has not been able to tell me what I'm doing wrong...
Hi - hoping someone can help.
We have a new boiler which does the hot water in most of the house apart from a big tank in master bedroom (feeding the shower) which is supposedly on Economy 7 as we have a dual meter. There are seemingly no timers on the tank / elements so wonder how they come on...
bought a timeguard immersion timer today to switch an immersion heater on and off ,no problem there then ,however on reading the literature it says it only switches 100 watts of led's. whilst i understand inrush on led's its a bit strange it can handle 16 amp resistive but only 100watt of led.s
Gents.
Does anyone know how to unlock a suntracker timer please, I have a flashing lock on the screen but instructions are sketchy in the paperwork.
TIA.
Hello dear forum,
I have a ceiling fan that seems to work alright when i switch it on. However when i put an electronic timer switch, instead of a physical switch, the fan does not work, the switch circuit does not seem to be powered, i.e. the leds are off, the buttons do not seem to have any...
I'm fitting oil-filled panel heating into two rooms of a remote workshop, with (currently) a 20A x three phase supply.
Control, for occasional use only, is needed as follows:
1. A wall-mounted and easily-adjustable mechanical timer to set all the heating to come on an hour or two before people...
I recently installed ‘FX20VE Downflow Fan Heater with Pullcord and Timer’ 6 in total and am wondering if there is any way of disabling the auto timer that keeps cutting out after 30 minutes. This is because the heating is intended to be controlled by a wall thermostat.
Hi all!
I need help wiring my mechanical timer. I saw a similar thread but the cables are different.
Thread
My current installation:
My new mechanical timer:
The schematic for both wiring:
(New at the top, current at the bottom)
I will really appreciate some guidance on the correct set...
Hello everyone,
Just hoping to check to see if this has been done correctly. Had a bathroom fitted and had an extractor fan put in by the bathroom fitter (I assume he did not use an electrician for this part). The fan I got was one with a timer. We discussed it being on for 30 min after. I...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc