Hi guys me and my partner have recently moved into a new property that us an immersion heater switch for warm water , problem is one of us always forgets to turn it off and it just burns through the electricity so therefore I bought a digital timer so it can be set when to come on and go off so...
hi, can't suss this, doing an extractor with run on timer, which has led light. Cabled the separate isolation switch, two way to fan, 2 way to jb, light switch l1 to isolator l1 at jb, sperate line feeds to lights, common to line at jb with live feed from lighting ring, neutral has neutral in...
Hi,
I've been asked to provide an override switch remotely for some external lighting which is on a din rail Timer so they would like to if required, to turn lights off if Timer is in operation and vice versa turn lights on if Timer is off. Would a 3 position switch like this do the trick and...
Good day all, a newbie I am and happy to be with the forum, as I feel sure I will find the answer to my problem.
So, coming from the rooftop solar heating panel, there are only two wires that came into my DB board, a black and a red, neutral and live I am assuming.
From either or both of...
Hi all, I have zero experience with boilers and timers so hoping I can clear up some confusion.
I have a Horstmann Electronic 7 with a simple digital interface controlling a Heatrae Sadia megaflo tank.
I need hot water at irregular and different times of the day throughout the week.
I can set it...
Hi,
Was looking to replace my central heating timer with a TimeGuard NTT04. Had a look yesterday and the wiring is different than my old timer.
The new timer has 4 connections - L, N, S In, S out.
Wiring diagram -
230V 50Hz Mains Supply:
Live (Brown or Red) to L
Fit a ‘Link’ or ‘Bridge’...
Hi, newbie so go easy!
Have some outside hardscaped LED strip lights. Looking to add in a photocell dusk to dawn with timer function so I can have them come on at dusk and switch off at say midnight. Also however looking to add in a security aspect where I have a couple of PIR’s which will...
Hello,
Just a question, hopefully someone can answer for me.
I have outside porch lights 2x LED on a dimmer switch controlled from my hallway.
Question is ... can I fit a timer to the wiring? And how?
The wires go into a junction box in my garage so I could ... if I'm right in thinking fit a...
Hey all, prob been asked lots before but is anyone NICEIC registered and can make head or tail of half the documents they require ?
Seems pretty extensive and even saw that they may need a letterhead with company name on or similar too ?
I don't have anything like that as I compile estimates...
I need to put an exterior grade switch with a timer, to switch a 12v AC solenoid which is fail-secure- so it needs a momentary voltage to open the gate.
All the electronic switches I am finding are 12v DC- but I need AC. I can't just use an ordinary push to make as I need a timer, so the...
Looking some advice on wiring a siren through a timer to alert everyone to the conveyor belt running. They don't want it to delay the belts starting (stupid idea) they just want it to sound when the belt starts up as it's unguarded. I'm wiring it off a n/o contact on the push button. I'm trying...
We have a number of inline fans which we would like to repurpose for bathroom ventilation.
We are looking to find switch/permanent live timer run on timer modules to facilitate these fans being used to vent bathrooms.
In particular, we are hoping to source modules capable of being set in excess...
Age old problem of the customer wants to have the bathroom extractor to come on with the bathroom lights but doesn't want the fan to run if just going for a number 1 in the middle of the night o_O
Having a look about I've pretty much decided on an Air flow icon 15 fan with delay start timer...
Hi everyone,
I had an extractor fan fitted in my downstairs toilet yesterday. The fan turns on when the light turns on. The problem is that the fan runs for about 15 minutes after I turn the light off. I only need it to run for a minute or 2.
According to the instructions the electrician left...
so I have an ip rated double socket outlet on the side of my decking. It's spurred from a double socket workshop which is fed from the house CU (SWA)
Iv fitted some decking lights which have a standard socket fitting. I'm looking at options to have the lights automatically turn on around...
I have inherited a fully working underfloor heating system, but can't work out the instructions for the timer that controls the thermostat!
http://www.swegonhomesolutions.dk/Global/PDFs%20Archive/Air%20handling%20units/Compact%20Air%20(-2007)/_en/CACZ05.pdf
I followed the instructions...
123 submitted a new resource:
Heating: Modified S Plan With Timer Relay Overrun - Heating: Modified S Plan With Timer Relay Overrun
Read more about this resource...
Hi,
Can't seem to find anything in the regs but I have been asked to fit an extractor fan in a small cupboard containing some IT equipment which gets quite warm and it's just to dissipate heat out of the cupboard. My question is, as it's a fan without run on timer I am using T&E to power it...
Hi all, first time poster :)
trying to figure out the british naming conventions on electrical components, and in need of help to identify the name in the UK, so here goes..
I have a single speed 1hp pool pump with a sal****er clorinator that requires to be run for 2 hours daily to keep the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc