transfer

Recent contents Top users
  1. klumsy

    Transfer switch wiring (for generator and/or Anker Solix)

    Our house , here is rural washington state, USA has an external Square-D double throw not fusible" external manual transfer switch (DTU-224NRB) , (see attached photo) . the previous owners had it attached to a diesel generator, but the wires for the that are gone once we got it.. we have a...
  2. G

    Transfer Switch Grounding

    I have Generac Homelink Upgradeable Manual Transfer Switch (Model: G0068521 Serial: 3009887938). The neutral is switch and I believe when this happens it is a separately derived system. The manual recommended the generator attached to the transfer switch needs to have its neutral bond to the...
  3. T

    Using manual transfer switch to distribute power

    The application is providing AC to a camper. The goal is to provide AC input to charge a solar 'generator' when the camper is connected to shore power. Then, when the camper is disconnected from shore power the transfer switch is moved to Position #2 for the solar generator to provide AC power...
  4. N

    Using Wireless Power Transfer to power High Power Appliances

    I am just curious, can Wireless Power Transfer (WPT) be used to power high-powered appliances such as washing machines, dryers, etc.? If not, I would appreciate it if you could explain why is that.
  5. tbaine01

    Diy Automatic Transfer Switch install, 194 and 23 wires

    All my life red is positive and black negative. I was under expression the 194 was 12v + and 23 was the ground to complete circuit. This switch is tagged 194 wire black and 23 red, Just like an apinion
  6. puntloos

    3 phase, Automatic Transfer Switch for Solar/Generator - EPS

    For power outages, my solar inverter (+battery) is able to take on the entire house load - as long as I unplug my collection of vintage kettles. ;) - this is called EPS mode - Emergency Power Supply. Needs to carry grid (3 phase, 69A/phase) or solar inverter (3ph, only 7000W max) TL;DR: Can...
  7. MJS123

    Single Phase Transfer Switch in 3ph Distribution

    When there exists a single-phase transfer switch within a 3-phase distribution system, is it necessary for both feeds to the transfer switch to be connected to the same phase on the two sources? Take for example the image below, note that the transfer switches are connected to the power sources...
  8. W

    What are the terminals nc and no used for on my transfer switch.

    My auto switch (Briidea HGAS-01) has NC and NO terminals on both the shore and gen side of switch. I know what nc and no is symbols for (normally open and closed) . Instructions are very limited. Just shows schematics, but no indication of what the no and NC are for. I would like to have the...
  9. B

    Need help with a Reliance transfer switch connected to a GFCI outlet.

    I installed a Reliance Transfer Switch on my home. 8 of the 10 circuits are working correctly. 2 of the circuits are operating GFCI outlets. After hooking everything up, the GFCI outlets stay tripped. They will not reset. Who do I need to do?
  10. S

    Reliance Controls 6-Circuit 30 Amp Generator Transfer Switch Kit in Quebec...??

    Hello from Quebec. I understand there are conflicting reports as to what can be legally installed here, specifically whether or not a junction box must be placed inbetween the switch and the breaker box. I've sent my insurance co the question as to what effect installing the transfer switch...
  11. K

    Inverter generator - manual transfer switch - voltage issues

    Hi Sorry to bring this one up again but have read numerous posts and answers and not got an answer specific to my situation. I have a Loncin LC3500i inverter generator which my electrician has wired via a transfer switch into a secondary consumer unt which covers the garage and office withing...
  12. R

    Transfer Switch for Generator

    Just joined as DIY homeowner. I plan on buying a 10KW backup portable generator and using a transfer switch on the house in Riverside County. As part of that plan, I have these questions on transfer switch configuration that will pass inspection to get a permit. It is a chicken and egg situation...
  13. A

    Isolator vs Transfer Switch for generator (or both)

    This is an elaboration of a previous question. It is my intention to have a smart meter installed and an isolation switch at the same time. Just waiting on a date. However, given three days of storm power cuts I am now also thinking of adding a transfer switch so that my 8Kw petrol...
  14. T

    ATS(automatic transfer switch)

    Please I need some help o how to wire a motor operator xmd 9 for ATS operation
  15. S

    Wiring a generator transfer switch

    Ok. So my generator is a duromax 12500 dual fuel. I want to wire it to my panel. I know I need a transfer switch. Here is my dilemma. The bozo that wired the house put about half of what I want to wire to the transfer switch on a 50 amp sub panel. So basically half the house is on the 200 amp...
  16. A

    Wiring Transfer Switch

    I have a Omron Transfer switch but not a clue how to wire it . It is in situ at the moment with wires attached however all the wires have now been cut off . When they were connected they supplied a house from either an Inverter or a Generator . Normally for most of the time the house is fed from...
  17. F

    Industrial to domestic transfer

    Morning all. Long story short been an electrical engineer for 10 years. looking to take on domestic work (and no Ime not claiming it easy or that Ime fully able) My qualifications include electrical HNC, electrical Maintenance NVQ3. Engineer operations NVQ 2+3. Mechanical BTech. Compex, IOSH...
  18. chriskay301

    Generac Automatic Transfer Switch Install

    Hello, I bought a used generator and transfer switch from a Generac installer. He had a customer that was upgrading, so he bought their old one, and then I got his old one. Anyway, it is a 7kW unit with an automatic transfer switch + panel. The generator is installed, starts up and runs, and I...
  19. J

    Transfer Switch Question

    Afternoon! Below is a picture of my Reliant Outlet and Transfer Switch Box. My inside panel does not have anything telling me about what I can run if I plugged in a generator to this outlet. I understand I have to turn off the main breaker if the power was off but do I turn on the 30A and 20A...
  20. J

    Transfer to a sparky

    Hello all! I could really use some advice please. I’m currently working as a offshore electrical commissioning tech. (2weeks on 2weeks off) and really want to start my own domestic electrical business on my off rotations. My problem is that my qualifications are as followed: L3 NVQ and BTEC...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
Back
Top