tumble | Page 2

tumble

Recent contents View information Top users
  1. T

    Anyone clued up with tumble dryers ?

    dryer doesnt spin once started, but if you press start and spin the drum it will start any ideas ?
  2. B

    Hoover Tumble Dryer has no power

    Dear All, Hope you can help a little :-) Our tumble dryer (Hoover Dynamic Next 8kg) suddenly decided to have no power whatsoever (no lights, no anything). Checked the plug (fuse as well), socket, power supply and all seems fine so something seems amiss in the dryer itself. Checked the door...
  3. D

    2 Washing Machine & 2 Tumble Dryers

    Hi all I would like your opinion on the set up my landlord is presenting me before he gets (his own) electrician in. we will be moving in soon and in the utility room we will be taking 2 tumble dryers and 2 washing machines. (At the moment in our current house we can only use a max of 2...
  4. W

    Tumble Dryer And Plastic Conduit

    Hi, Im putting my girlfriends tumble dryer in the garage. The wiring will be in black pvc conduit, i would like the conduit to run approximately 6-12 inches horizontally above the dryer to a double gang socket to plug it into. My concern is the mutual detrimental influences of the dryer...
  5. T

    Tumble dryer plug melted

    My tumble dryer has been in the same position and worked for years today no power when I check plug hard to remove. Which I discovered was because melted, dryer was plugged into extension lead. What would have caused this? Do I need new dryer or can I just fit new plug? Thx
  6. telectrix

    Indesit. tumble dryer.

    says water container full but it's not. anybody got aa clue? oops spell checker strikes. Indesit
  7. O

    AEG T58870 tumble dryer will not start

    Hi all, I would appreciate your advice. Recently my AEG T58870 tumble dryer stopped working. It stopped in the middle of the drying cycle and the LCD screen just "died" (no digits on it at all). Since then, it won't start. I've tried using another socket which I know is working properly but no...
  8. C

    Tumble Dryer --------------

    Hi Guys Can someone out there put me straight, I’ve got an old Condenser Hotpoint TDC 60N Tumble Dryer and it keeps blowing the thermostats at the back of the machine where the heating elements are and I'm trying to find out what’s causing them to blow, they are the one shot type. I'm only...
  9. Gavin John Hyde

    Tumble dryers in shower rooms.....

    Doing an EICR today and customer has a tumble dryer in the shower room. Room is an L shape with shower directly in front of door and around corner under stairs is a tumble dryer. it is fed from a socket in the lounge next door, cable has plug on it in socket that goes along skirting through...
  10. D

    Tumble dryer suppressor wire burnt out

    Hi we have had this tumble dryer for around 5 years. Around a year ago the brown wire in the plug going into the wall socket burnt out so i replaced the whole power cable going to the supressor, 6 months later it packed in, I opended it up to find the supressor leaking so replaced it, today I...
  11. R

    Tumble dryer extension plug melted.

    Six years ago, I had a double socket installed in my store room. This was placed next to the fuse box and its purpose was so I could connect my tumble dryer. The socket was too far away from the dryer, so I bought some 1.5mm flex and wired in an extension from the newly installed double...
  12. J

    Tumble Dryer Drum Earth Strip -- DIY strip OK to use

    The earth strip on our tumble dryer needs replacing as the drum spindle has worn through it. A replacement strip is around £10. As the strip is a thin piece of copper, about 2in long and 1/4in wide, £10 seems way too much to shell out. I've made one from a copper pipe clip (cost 14p). Would it...
  13. A

    Tumble dryer problems advise

    Hi hope someone can advise. My tumble dryer keeps tripping the elecrics 15 min into it's cycle. Just need to test the heater components. To check therostats should my multi meter be on high setting or low.
  14. RWJ

    PRS...Music Licensed need for van!

    Apologies for the "auto correct" title! I thought we'd had all this 5 - 6 years ago with the PRS phoning everyone trying to enforce their "license". They've obviously spent the money they made from that scam so are back on the phones. Apparently if you have a colleague in the van and you...
  15. S

    melted plug issue condenser dryer

    Hi guy been using an (Status) extention lead to run are tumble dryer due to the mains socket just being out of reach every time we use the tumble dryer it is plugged into a double socket fully unwound and only has the tumble dryer pluged into it the other spare has a serged protected 4 way...
  16. B

    Pat Test Question About Tumble Driers

    Hi all, First off I do not believe I am wrong, however it has been known once before ;) My tumble drier is insured at home however the button broke and we called an engineer and when I unplugged it I found this ( see pics ) Now I PAT test as part of my job, and would like to hope I know what...
  17. B

    If You Have A Tumble Dryer Read This

    TUMBLE DRYER sorry about the title seems they are causing fires with a fluff build up on the heating element and a lot have been affected Creda, Indesit and Hotpoint see link below 'Significant number' of Hotpoint, Indesit and Creda tumble dryers 'pose a fire risk' - ITV News
  18. A

    Tumble Dryer+oven+extension Lead=pop

    Not easy to see in the image but the Live and Neutral are fused together. I ripped the top off to see what happened. It was in a B and B house kitchen.
  19. T

    Installation Of Washing Machine, Tumble Drier And Boiler In A Too With A Shower

    Hello guys, I 've been asked to provide power in a utility room with a shower, for a tumble drier, washing machine and boiler. I was thinking that fused spurs will suffice, they would be outside zone 2 but not 3 m away horizontally. Any thoughts? Cheers Tom
  20. M

    Tumble Dryer Tripping Rcd

    I have a 3 month old condensing tumble dryer, which has recently started tripping out the RCD (63A, 30mA) within 30 secs of being on. I've tested the RCD, which was going out at 18mA, and the tumble has an earth leakage of 1.17mA. I have now changed the RCD, but still continues to trip, within...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top