Installing Underfloor heating in a bathroom under tiles,
the stat and the spur from ring main in situated outside the door of the bathroom,
do I minor works for the spur and electrical installation cert for underfloor heating matt, or just one electrical installation cert, schedule results and...
Hi guys/gals.. I have been asked to quote for installing an electric underfloor heating system in a bathroom and kitchen (old house the bathroom is next to kitchen) its around 16m square. I happy with the installation but wondering how much to charge as i haven't installed one before? any advice?
a kitchen island needs power to it for a double socket, apparently it has a flex with a plug on it, and you just need to plug it in somewhere. and as it'a an island it would mean pugging a socket in the middle of the floor. at the minute theres a blind of concrete on the floor, there is going to...
Good Afternoon, A plumber has approached me with a slightly odd system which has left me quite stumped.
The System is as follows:
Boiler: Ravensheat Condensing fanned combi CSI 85 A (T)
1 x 2way valve CH
1 x 2way valve HW
1 x 2way valve UF
I have been told that the:
HW upstairs /CH/UF is to...
Hi I'm trying to connect up a wet underfloor system to a ferroli combi boiler it's wired through a poly pipe single zone wiring master , the question is how do I wire up a switch live from the wiring centre to the boiler when the boiler needs a perm live to feed hot water on demand can't see...
Hi,
I have a customer who has purchased a underfloor heat mat for his bathroom, to fit under his carpet. When fitting this thing I told him it required an earth, as it was not within the cable feeds to the elements. I put a 1.5mm Earth cable down to behind a pedastal basin, so that they could...
Hi there, I’m looking for some advice regarding underfloor heating. The conservatory is 20.9m2 and total power is 3.344kw. At 230v this gives me a current rating of 14.54A. The controller is rated at 16A, normally I supply controller via 13A switched fused spur but with this increased loading I...
Hi, I am new to underfloor heating testing and wanted to get some feedback from anyone experienced with testing such systems. From info gathered it appears there are 2 basic types of underfloor heating. Elements with a screen that is connected to earth for installations in bathroom and wet areas...
I've been asked to go out and look at a job - wiring in a Heat Mat to go under some tiles (bathroom I think, but not been out to visit yet.)
Firstly, I've never done one of these before, so any pearls of wisdom would be greatfully received.
Secondly, I'm assuming that a 'Park Home' (static...
Hi
We've just had Aube TH232 electric underfloor heating fitted under a new Travertine floor in our conservatory and although the tiles are warming, they're doing so very slowly. In fact, we've manually set the temperature to 40C and its only at 21C ( on F mode) after 3 hours.
Can anyone tell...
Hi fellas,
I was wondering if somebody could help me with a wiring diagram please, it is an existing system that has had underfloor heating added.
The system is:
Oil fired fully pumped system ie
motorised valve on heating
motorised valve on the dhw
Addition:
Underfloor heating manifold...
Hi I went to see a job this evening for a building firm that I do their electrical work for them reguarly.
The house was extended last year which comprised of a lounge and 1 bedroomabove. the elecrical firm installed a seperate ccu with RCD protection with one mcb for the ring main for the...
Good evening, my knowledge with heating isn't great, so thought ide seek some advice.
At current there is a heating system (Gas boiler) which is serving heating (rads) / hot water. The plumber has said he's slightly puzzled from the system to weather its a Y or an S plan.
They've had an...
Hi guys,
A bit of guidance required, am down to wire up a central heating system along with underfloor heating( ufh is made by John guest) plumber has left me with a heating wiring centre and also an 8 zone underfloor heating panel, looks like a f/a panel. question is.... Do I need the wiring...
I will be installing Warmup electric UFH in my bathroom today and would appreciate some guidance with running the heating element power cable to the thermostat.
I had planned to run the power cable within the 150mm vertical "safe zone" of a stud wall to the thermostat which will be located on...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc