using | Page 5

using

  1. A

    Using a Metrel MFT with a R2 long lead

    Hi, how can I connect my Kewtech R2 lead to my Metrel MFT so that I do not have to carry the R2 reel with me whilst doing R2 testing? There was never an issue using a Megger but the Metrel utilises a block connector instead of 3 individual leads. Thanks
  2. D

    Can I switch 3 lighting circuits using 1 switch with only 1 live feed

    Hi All I have around 30 garden lights which turn on and off with one switch in the house. The problem is, if water gets in one light it a) stops all lights working and b) requires troubleshooting 30 lights to find the problem. Therefore, I was planning to have a second distribution board...
  3. D

    Using plastic glands on a metal board...arrggg

    So this has been asked a few times but still not 100% clear on this I have to add a cable to a an existing 17th ed board , all the existing cabling is rear entry but this isn’t possible for my new cable. So Im going to cut a 20mm hole in the bottom and use a 20mm plastic stuffing gland to run...
  4. Gavin John Hyde

    Using a priority unit in garage with ev charging

    I have an install coming up where there is a 40 amp supply to a garage via 2 core 4mm swa buried. due to a rather expensive patio and other works its not possible to run a new swa to garage. Customer wants ideally to keep the sockets/lights in garage and have an ev charger. Charger will be used...
  5. T

    looking for best step / cone cutter for using on 18th edition consumer units

    Hi all, i,m looking for recommendations on a reliable tough step /cone cutter for using on 18th edition boards ?, i'm sick of hole saws rattling round and making a mess , your guidance would be greatly appreciated ! cheers fellow sparky's.
  6. A

    UK Cable-Mate Software

    Cable-Mate Software, last updated Jan 2019. Cable-Mate - http://www.jarsoftelectrical.co.uk/index.html is anyone using this? or has used this? oh its now free.
  7. F

    Using a garage CU as the main CU for flat

    Hi, If a home only uses 3 circuits, Can you use a 3 way garage CU as a replacement for the current old style CU (5 way with 2 spare)? Are garage CU just little standard CU's? Is not having spare room for additional circuits a c2 fail on EICR? Cheers
  8. S

    Bosch GMS 120 Cable Detector

    Hi Everybody Has anybody on here any experience of using a Bosch GMS 120 cable detector? The scenario I have is that I am working on a stone built cottage ,plastered with sand and cement which I guess was rewired 30 + years ago where all the cables have been plastered into the walls and not...
  9. D

    MK essential range , anyone tried it ?

    View: https://www.youtube.com/watch?v=osbADF3sOHU JW gives it the low down , anyone fitted any ? Looks a bit naff imo
  10. R

    Adding more outside lights to same switch inside

    Hi. I have an outside porch light which has a switch just inside the hallway. I am adding 2 more outside lights to be switched on using that same switch. I have ran 1mm cable from the switch line and neutral & earth to the new light and continued that to the 2nd new light. When I switch the...
  11. T

    Can a Non POE device be powered using a CAT6 cable using POE splitters and Injectors?

    Can I power a Non PoE device using a CAT6 cable and use it with a PoE splitter or Injector
  12. H

    2013 Passat oem remote signal wire to reverse camera question?

    I have a 2013 Passat SEL Premium that had a digital OEM backup camera. Had to replace the head unit with aftermarket and tried a digital to analog converter for the oem camera and it didn’t work. Have 3 wires from the OEM camera. Solid power (red), reverse remote signal wire (blue) and ground...
  13. L

    Using breakers as junction/splice points

    Hi all, currently re-wiring a hotrod using part existing loom and part new looms, was wondering is I could use auto re-set circuit breakers at junction/splice points rather than post terminals or hard wire splices, that way serves as a terminal point for several actives as well as distributing...
  14. C

    Advice for using Future Skills International when applying for Australian Electrical Licence

    Hi Can anyone who is currently going through the process of getting their electrical licence with future skills international or anyone has already done it please advise me. I am currently at the stage of writing out the description of what work i have done for each employer and i have...
  15. R

    Are employers spying on employees using Simpro software

    Hi,Richie here. I've been an electrician 20 years. Recently in the last few years software called simpro became available to us. With some positive results it also has some negative. Are employers using it inappropriately by knowing the whereabouts of workers long after they have finished their...
  16. B

    So what brands are we all using for power tools?

    I'd always been a Makita kinda guy but i must say i'm not impressed whatsoever by their recent stuff, from about 2016 onwards. The chucks on the cordless drills are absolutely dreadful and the battery life leaves a lot to be desired. They used to be my go-to but all i can assume is they've...
  17. S

    Using SY cable in a fixed installation

    Hi, got a job that’s coming up which involves putting electricity to a wagon that’s half way down a field from someone’s house. They want it so it’s like a caravan, so they can disconnect the power lead whenever they want and move the wagon around. There’s only 2 circuits in the wagon; 4 lights...
  18. M

    How do i calculate missing resistance readings in a parallel circuit using R1 and Rt

    Hi I am a current student studying to become an electrician and a question has thrown me. I'm wondering if someone could help, there is a question on one of my home work books. "complete the following table assuming the resistors are connected in parallel?" the example I will give is R1 is 120...
  19. O

    Using SWA for tails.

    Hi everyone, Just been on a new build (one off build not cookie cutter), original sparks left some SWA for a car charger and electric gate that I have been working on, I have signed off these two new circuits. The tails have been taken from a DNO supplied main switch, TN-CS with 100A fuse. He...
  20. T

    Using an inverter for home backup power

    I’m interested in using a high-capacity inverter as home power backup when the grid goes down. I see that there are high-capacity inverters such as this one: AIMS Power 6000 Watt Pure Sine Inverter Charger 120/240VAC Output, PICOGLF60W24V240VS -...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top