I discovered this whilst removing tiles in my daughters kitchen.
It disintegrated when i touched it with the sds drill
No enclosure just a backing plate rawl plugged to the wall and plastic terminal blocks behind.
As its unsafe and exposed I need to repair it as quickly as possible.
There isn't...
Has anybody used a ferrule in a push fit wagos? I need to cut into a ring circuit to make a spur using singles (in conduit) but only have push fit wagos no good for flex as we know. I don't want to make a special trip in the morning and £20 on a box of latching wagos that I probably won't use...
Hello
there is one three plate pendant in the lounge on the ground floor and I've been asked to install a new chandelier fitting about half a meter away.
the client doesnt want to keep the existing light,so i cant simply fish a cable from the ceiling rose.with the joint being accessible whats...
Now not fitted enough line products to fully trust them but after reading this
(equivalent to wago 222-415) Due to Production problems may substitute this part with WAGO 222-415
My confidence has bottomed out.
Need to restock my van stock
So what is your recommends line products or wagos
After alot of recommendations I dragged myself from the dark ages last friday and bought a big box of Wagos' at ELEX.
No probs with how the connectors themselves work but could someone give me an idea when they need to be in wago boxes and when they don't.
I'm thinking behind plastic c/roses...
Hi.
Quick question.
Iv (permantely) removed a wall light. Which I will fill in the hole in the plaster board. I need to 'terminate' the wires and push them back in to the wall before plastering.
What do you normally do? I'm inclined to use Wago's and insulate.
Any other thoughts ?
Thanks
I have never used Wago connectors before today, always been a bit dubious as I'm not keen on any push in connectors but I had a few cables to join today and these caught my eye in the wholesales so I thought I'd take the plunge after reading about them on here. Anyway after using them it was...
Hi guys, I read a very interesting thread here fairly recently re the use of Wago's and in line boxes complete with pics when used connecting d/lighters. Tried using search on here but to no avail! Any idea how to find said item? Or any info re products etc. Thanks
I was wondering what folks do with their neutrals when three plating at switch? I've been using wagos, but I was chatting to another sparks and he was saying that he had been pulled up for not securing the neutral in the box. What are people's thoughts?
Hi chaps,
Just wondered where the best place is to pick up a bulk lot of MF connector blocks.
I picked up some Wagos on eBay a while back and they're brilliant, but don't know anyone locally who stocks them.
Anyone know of any of the big chain wholesalers where I can get them?
Hi guys
Wondered if anyone still uses the joint box method of Rewiring a lighting circuit?
For example on an occupied upstairs downstairs house where you are Rewiring upstairs lighting circuit using existing conduit drops to switches.
I am attempting to price such a job and reason I...
I need to extend some cables to move a CU, and I was going to use an adaptable box, some top hat din and Wagos, but I can only seem to find ones rated at 24amp, which is fine for the most of it but what about 10mm shower?
Anyone got a link, my wholesaler aint got nothing higher.
Also do you...
Got to remove a socket and connect it out in a house, the room is being converted to a bathroom so putting it under floor in Wagos , the circuit is fed from a BS3036. Will I need to protect the circuit with a RCD as I have carried out a alteration to the circuit or not.
Had some delivered for a lighting junction box which I need to wire and plaster in.
Surprised to find they don't show the "MF" logo, or a BS number.
According to the BGB, this means they're not suitable, but I've been told by a number of people that they are perfectly ok. Do Wagos normally...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc